Effects of cold deformation and annealing process on microstructure and properties of Ti45Nb alloy

doi:10.13251/j.issn.0254-6051.2024.05.018

Abstract

Abstract: Cold deformation of Ti45Nb alloy wire was carried out using roller die drawing technology. The effects of cold plastic forming and annealing process on microstructure and mechanical properties of the Ti45Nb alloy wire were studied by means of OM, EBSD and tensile test. The results indicate that with the increase of cold deformation, the grain size of the Ti45Nb alloy wire gradually decreases, the orientation density index of the grains gradually increases, and the <110> silk texture dominates. At the same time, the tensile strength and yield strength of the Ti45Nb alloy wire gradually increase, but its shear strength does not change significantly. The use of water cooling can significantly improve the plasticity of the annealed Ti45Nb alloy wires and prevent cracking during compression deformation. The complete recrystallization temperature of the Ti45Nb wire is around 670 ℃. As the annealing temperature increases, the grain size significantly increases, and the tensile strength and yield strength show an upward trend.

Key words: Ti45Nb alloy, cold deformation, heat treatment, microstructure, mechanical properties

CLC Number:

TG146.24

Wang Zelong, Feng Zhaolong, Li Wei, Sun Sibo. Effects of cold deformation and annealing process on microstructure and properties of Ti45Nb alloy[J]. Heat Treatment of Metals, 2024, 49(5): 112-117.

References

[1]肖浩, 孙杨, 范娟娟, 等. β钛合金热处理工艺研究进展[J]. 金属热处理, 2023, 48(11): 258-265.
Xiao Hao, Sun Yang, Fan Juanjuan, et al. Research progress on heat treatment of β titanium alloy[J]. Heat Treatment of Metals, 2023, 48(11): 258-265.
[2]李蒙, 凤伟中, 关蕾, 等. 航空航天紧固件用钛合金材料综述[J]. 有色金属材料与工程, 2018, 39(4): 49-53.
Li Meng, Feng Weizhong, Guan Lei, et al. Summary of titanium alloy for fastener in aerospace[J]. Nonferrous Metal Materials and Engineering, 2018, 39(4): 49-53.
[3]宁聪琴, 周玉. 医用钛合金的发展及研究现状[J]. 材料科学与工艺, 2002, 10(1): 100-106.
Ning Congqin, Zhou Yu. Development and research status of biomedical titanium alloys[J]. Materials Science and Technology, 2002, 10(1): 100-106.
[4]商国强, 王新南, 唐斌, 等. 紧固件用Ti-45Nb合金丝材的性能评价[J]. 中国有色金属学报, 2010, 20(S1): 70-74.
Shang Guoqiang, Wang Xinnan, Tang Bin, et al. Property evaluation of Ti-45Nb alloy wires used in fastener[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(S1): 70-74.
[5]林杨, 张建国, 王泓, 等. 时效温度对Ti-45Nb合金组织与性能的影响[J]. 金属热处理, 2014, 39(10): 125-127.
Lin Yang, Zhang Jianguo, Wang Hong, et al. Effect of aging temperature on microstructure and properties of Ti-45Nb alloy[J]. Heat Treatment of Metals, 2014, 39(10): 125-127.
[6]Völker B, Maier-Kiener V, Werbach K, et al. Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb[J]. Materials and Design, 2019, 179: 107864.
[7]李健, 庄宇盛, 李春慧, 等. 冷变形及时效对新型β钛合金组织性能的影响[J]. 金属热处理, 2022, 47(11): 70-76.
Li Jian, Zhuang Yusheng, Li Chunhui, et al. Effect of cold rolling and aging on microstructure and properties of novel β-titanium alloys[J]. Heat Treatment of Metals, 2022, 47(11): 70-76.
[8]任德春, 刘玉敬, 张慧博, 等. 冷变形和时效热处理对TB9钛合金组织和性能影响[J]. 稀有金属材料与工程, 2020, 49(3): 1083-1089.
Ren Dechun, Liu Yujing, Zhang Huibo, et al. Influence of cold deformation and aging heat treatment on microstructure and mechanical property of TB9 titanium alloy[J]. Rare Metal Materials and Engineering, 2020, 49(3): 1083-1089.
[9]任德春, 苏虎虎, 张慧博, 等. 冷旋锻变形对TB9钛合金显微组织和拉伸性能的影响[J]. 金属学报, 2019, 55(4): 480-488.
Ren Dechun, Su huhu, Zhang Huibo, et al. Effect of cold rotary-swaging deformation on microstructure and tensile properties of TB9 titanium alloy[J]. Acta Metallurgica Sinica, 2019, 55(4): 480-488.
[10]王文娟, 李建康. 眼镜框架用TB5钛合金丝材的辊模拉拔[J]. 热加工工艺, 2014, 43(17): 125-126, 131.
Wang Wenjuan, Li Jiankang. Roller die drawing of TB5 titanium alloy wire for glasses frame[J]. Hot Working Technology, 2014, 43(17): 125-126, 131.
[11]张志强, 董利民, 关少轩, 等. TC16钛合金辊模拉丝过程中的显微组织和力学性能[J]. 金属学报, 2017, 53(4): 415-422.
Zhang Zhiqiang, Dong Limin, Guan Shaoxuan, et al. Microstructure and mechanical properties of TC16 titanium alloy by room temperature roller die drawing[J]. Acta Metallurgica Sinica, 2017, 53(4): 415-422.
[12]Karim E A, Joakim L, Lars P. Experimental comparison of roller die and conventional wire drawing[J]. Journal of Materials Processing Technology, 2018, 257: 7-14.
[13]苏连朋. β型二元TiNb合金塑性变形及其组织性能研究[D]. 太原: 太原理工大学, 2019.
Su Lianpeng. Study on plastic deformation and microstructure, properties of β-type binary TiNb alloys[D]. Taiyuan: Taiyuan University of Technology, 2019.

[1]	He Zongzheng, Wu Mingdong, Yuan Shuo, Yao Shuwei, Xiao Daihong, Huang Lanping, Liu Wensheng. Effect of Zn/Mg ratio on microstructure, mechanical properties and corrosion resistance of 7075 aluminum alloy [J]. Heat Treatment of Metals, 2024, 49(5): 1-9.
[2]	Bao Zheng, Cheng Xiang, Wang Ruomin, Miao Chunhui, Chen Guohong, Tang Wenming. Comparison on microstructure and mechanical properties of TP347HFG steel tubes served for different terms [J]. Heat Treatment of Metals, 2024, 49(5): 10-16.
[3]	Yang Xirui, Jiang Baoshi, Hu Fengtao, Li Yanjun, Sheng Chaojie, Wang Chen. Microstructure and properties of S30432 steel tube after long-term service at high temperature [J]. Heat Treatment of Metals, 2024, 49(5): 17-21.
[4]	Wang Shuliang, Mao Yidian, Li Qilin, Zhou Lujiang, Xi Yuchen, Zhang Huali. Effect of V on microstructure and properties of Fe-rich non-equiatomic FeCrCoNi high-entropy alloy [J]. Heat Treatment of Metals, 2024, 49(5): 22-28.
[5]	Wang Yinghu, Wang Enuo, Cai Xiaowen. Effect of copper content on morphology of sulfides and mechanical properties of 303 free-cutting steel [J]. Heat Treatment of Metals, 2024, 49(5): 29-35.
[6]	Guo Wei, Guan Bo, Chen Wei, Wu Dan. Effect of multi-cycle closed die compression on microstructure and wear resistance of AZ31 alloy with different Si contents [J]. Heat Treatment of Metals, 2024, 49(5): 36-39.
[7]	Feng Xingwang, Zhang Ke, Liu Jiujiang, Shi Ruxing, Su Wenbo, Liu Shuai, Li Zhipeng, Yang Bin. Numerical simulation and experimental verification of heat treatment after forging of SA508-3 steel for steam generator [J]. Heat Treatment of Metals, 2024, 49(5): 55-61.
[8]	Shi Hongchang, Huang Anming, Liu Xing, Qiang Bin. Numerical simulation on influence of post-weld heat treatment on residual stress in 150 mm thick vessel steel plate [J]. Heat Treatment of Metals, 2024, 49(5): 62-67.
[9]	Xu Yong, Liu Ke, Deng Yaoyao, Yang Bing, Lu Hailong, Luo Yi. Numerical simulation of microstructure and distortion evolution behavior of C-type specimens during carburizing and quenching [J]. Heat Treatment of Metals, 2024, 49(5): 68-73.
[10]	Liang Xiang, Gao Xiang, Li Yunlong, Xu Zhifeng, Zhang Zheng, Yan Liqing, Yu Huan. Effect of cryogenic treatment on microstructure characteristics and tensile properties of laminated punctured C_f/Al composites [J]. Heat Treatment of Metals, 2024, 49(5): 74-80.
[11]	Zang Kai, Wang Shouqian, Zhu Zhiyuan. Effect of solution treatment and aging on microstructure and properties of 21-4NWNb alloy [J]. Heat Treatment of Metals, 2024, 49(5): 88-93.
[12]	Zhao Qian, Dong Fuyu, Wu Fuchuan, Zhang Yue, Xu Xin. Effect of solution treatment and aging on microstructure and properties of Ti-5Al-3.5Fe-7Mo-4Cr alloy [J]. Heat Treatment of Metals, 2024, 49(5): 100-105.
[13]	Li Bo, Xiang Wei, Zhang Feng, Qin Fengying, Yuan Wuhua. Effect of pre-aging treatment on microstructure and mechanical properties of metastable β titanium alloy TB18 [J]. Heat Treatment of Metals, 2024, 49(5): 106-111.
[14]	Xing Zhenqiang, Pang Jingyu, Zhang Hongwei, Ji Yu, Zhu Zhengwang, Zhang Long, Wang Aimin, Zhang Haifeng. Effect of cold rolling, annealing and aging on microstructure and properties of Fe₅₀Ni₂₅Cr₁₅Al₁₀ high entropy alloy [J]. Heat Treatment of Metals, 2024, 49(5): 118-123.
[15]	Zhang Zengguang, Shi Jipeng, Wang Xinyu, Liu Yanmei, Yang Lixin, Kang Chong, Liu Gang. Effect of annealing temperature on microstructure and mechanical properties of laser welded joint of Ti60 titanium alloy [J]. Heat Treatment of Metals, 2024, 49(5): 130-134.