Optimization of aging temperature of 15-5PH precipitation hardened stainless steel based on quality analysis fitting curves

doi:10.13251/j.issn.0254-6051.2024.05.040

Abstract

Abstract: Using a commonly used quality analysis software, the hardness and tensile strength test data of 15-5PH precipitation hardened stainless steel aged at different temperatures were fitted and analyzed. An aging temperature is obtained to satisfy concurrently the requirements of hardness and tensile strength of the 15-5PH precipitation hardened stainless steel, the heat treatment system is determined, the process testing cycle is shortened and the machining requirements of parts are met.

Key words: 15-5PH precipitation hardened stainless steel, aging, hardness, tensile strength, fitting curve

CLC Number:

TG156.6

Zhao Guangjin, Ren Weibin, Zhao Jinlong, Li Xinyun. Optimization of aging temperature of 15-5PH precipitation hardened stainless steel based on quality analysis fitting curves[J]. Heat Treatment of Metals, 2024, 49(5): 234-236.

References

[1]余强, 范云鹰, 刘振宝, 等. 时效处理对15-5PH沉淀硬化不锈钢组织及性能的影响[J]. 金属热处理, 2013, 38(9): 16-21.
Yu Qiang, Fan Yunying, Liu Zhenbao, et al. Effects of aging on microstructure and mechanical properties of 15-5PH precipitation hardened stainless steel[J]. Heat Treatment of Metals, 2013, 38(9): 16-21.
[2]李伟, 杜楠, 樊兆宝. 15-5PH马氏体时效钢的工艺性能[J]. 兵器材料科学与工程, 2010, 33(1): 78-81.
Li Wei, Du Nan, Fan Zhaobao. Technological properties of 15-5PH maraging steel[J]. Ordnance Material Science and Engineering, 2010, 33(1): 78-81.
[3]张崇, 李作武. 最佳拟合曲线在轮重测试仪中的应用[J]. 兵工自动化, 2007, 26(2): 35-36.
Zhang Chong, Li Zuowu. Application of optimal curve fitting used in wheel test system of ray[J]. Ordnance Industry Automation, 2007, 26(2): 35-36.
[4]周亚森, 汪福莉, 刘刚, 等. 用拟合曲线的方法优化控制阀流量特性[J]. 科技创新与应用, 2013(26): 51.
[5]王钦仁, 汪庆娟, 赵肖飞, 等. 马氏体耐热刚40Cr10Si2Mo的动态连续冷却转变及相变动力学[J]. 金属热处理, 2023, 48(11): 16-22.
Wang Qinren, Wang Qingjuan, Zhao Xiaofei, et al. Dynamic continuous cooling transformation behavior and transformation kinetics of 40Cr10Si2Mo martensitic heat-resistant steel[J]. Heat Treatment of Metals, 2023, 48(11): 16-22.
[6]王旭明, 何斌, 魏海东, 等. 热处理工艺对17-4PH不锈钢组织和力学性能的影响[J]. 金属热处理, 2023, 48(6): 85-88.
Wang Xuming, He Bin, Wei Haidong, et al. Effect of heat treatment process on microstructure and mechanical properties of 17-4PH stainless steel[J]. Heat Treatment of Metals, 2023, 48(6): 85-88.
[7]吴剑飞, 张鹏飞, 栾涛. 时效温度对大型客机保险销延性断裂性能的影响[J]. 南京理工大学学报(自然科学版), 2021, 45(5): 545-550.
Wu Jianfei, Zhang Pengfei, Luan Tao. Effect of aging temperatures on ductile damage properties of large passenger aircraftś fuse pin[J]. Journal of Nanjing University of Science and Technology, 2021, 45(5): 545-550.

[1]	Shang Hongshuai, Han Wenfeng, Jie Zhaocai, Yuan Binxian. Effect of natural aging on Portevin-Le Chatelier effect of TiB₂/7050 aluminum matrix composites [J]. Heat Treatment of Metals, 2024, 49(5): 81-87.
[2]	Zang Kai, Wang Shouqian, Zhu Zhiyuan. Effect of solution treatment and aging on microstructure and properties of 21-4NWNb alloy [J]. Heat Treatment of Metals, 2024, 49(5): 88-93.
[3]	Zhao Qian, Dong Fuyu, Wu Fuchuan, Zhang Yue, Xu Xin. Effect of solution treatment and aging on microstructure and properties of Ti-5Al-3.5Fe-7Mo-4Cr alloy [J]. Heat Treatment of Metals, 2024, 49(5): 100-105.
[4]	Li Bo, Xiang Wei, Zhang Feng, Qin Fengying, Yuan Wuhua. Effect of pre-aging treatment on microstructure and mechanical properties of metastable β titanium alloy TB18 [J]. Heat Treatment of Metals, 2024, 49(5): 106-111.
[5]	Shuai Gewang, Huang Huizhen. Effects of S content and aging on reliability of Cu/Sn-8Zn-3Bi-xS/Cu solder joints [J]. Heat Treatment of Metals, 2024, 49(5): 135-139.
[6]	Zhang Yong, Ma Qingshan, Li Ruyang, Hu Xiaodong. Post weld heat treatment characteristics of S11306 stainless steel thick plate [J]. Heat Treatment of Metals, 2024, 49(5): 146-152.
[7]	Liu Gan, Kong Xianglei, Huang Minghao, Wang Yang, Zhang Yinghui. Effect of cooling rate on phase transformation behavior of ultra-high strength X90M pipeline steel [J]. Heat Treatment of Metals, 2024, 49(5): 162-167.
[8]	Pu Bowen, Liu Yuting, Wang Yanrong, Diao Zhanying, He Jingwei. Effect of quenching and tempering on microstructure and hardness of 34CrNiMo6 steel forged connecting rods [J]. Heat Treatment of Metals, 2024, 49(5): 173-178.
[9]	Liu Zizhi, Sun Fuzhen, Li Xiaoxu, Li Huiyu, Zhang Quanda, Mu Xuesong, Zhao Yan. Influence of solution treatment and aging on mechanical properties and microstructure of rare earth aluminum alloy [J]. Heat Treatment of Metals, 2024, 49(5): 193-198.
[10]	Zhang Rui, Zhang Xiaochen, Zhang Zheng, Cui Wenming, Yang Jiadian, Liu Yanxu, Wang Jixing, Bai Jiayuan. Effect of heat treatment system on microstructure and hardness of GH4698 superalloy [J]. Heat Treatment of Metals, 2024, 49(5): 204-209.
[11]	Lü Mingkui, Xia Tian, Zhang Baoyao, Yang Donghui, Chen Jing. Heat treatment process optimization of 35CrMo steel high strength bolt [J]. Heat Treatment of Metals, 2024, 49(5): 226-230.
[12]	Deng Dewei, Wan Hongming, Wang Hongsuo, Chen Wenbo, Lian Shiwei. Effect of laser clad Stellite6+WC composite coating on water erosion resistance of stainless steel blades [J]. Heat Treatment of Metals, 2024, 49(5): 243-251.
[13]	Lü Ben, Wan Xunzhi, Liu Cheng. Failure behavior of a low carbon alloy carburized steel roller [J]. Heat Treatment of Metals, 2024, 49(5): 272-277.
[14]	Zhang Wentao, Liu Chao, Du Yao, Min Yongan. Jominy end quenching characteristics of 52CrMoV4 leaf spring steel [J]. Heat Treatment of Metals, 2024, 49(4): 12-17.
[15]	Ma Qidong, Zhang Yubo, Yue Shipeng, Chen Jiale, Li Tingju. Microstructure and properties evolution of Cu-Fe alloy after cryogenic rolling and aging treatment [J]. Heat Treatment of Metals, 2024, 49(4): 48-54.