Effect of current annealing on properties and plastic deformation of Fe78Si9B13 alloy

doi:10.13251/j.issn.0254-6051.2024.07.035

Abstract

Abstract: The plasticity of Fe₇₈Si₉B₁₃ amorphous alloy thin strip was modified by conventional annealing and current annealing. Nanoindentation tests and plastic forming tests were carried out to evaluate the properties and forming effect of Fe₇₈Si₉B₁₃ amorphous alloy thin strip under the two annealing processes. The results show that when the temperatures of the two annealing processes are the same, the hardness and elastic modulus of the Fe₇₈Si₉B₁₃ amorphous alloy thin strips after current annealing are lower, and the plastic forming effect is better, in which the nanoindentation displacement after current annealing at 300 ℃ for 20 min is the largest, and the improvement of the plastic deformation behavior is also the most obvious.

Key words: Fe₇₈Si₉B₁₃ amorphous alloy, current annealing, nanoindentation, properties, plastic deformation

CLC Number:

TG156.7

Niu Xiaomiao, Jin Tao, Wang Ze, Wang Tao. Effect of current annealing on properties and plastic deformation of Fe₇₈Si₉B₁₃ alloy[J]. Heat Treatment of Metals, 2024, 49(7): 225-230.

References

[1]汪卫华. 非晶合金材料发展趋势及启示[J]. 中国科学院院刊, 2022, 37(3): 352-359.
Wang Weihua. Development and implication of amorphous alloys[J]. Bulletin of Chinese Academy of Sciences, 2022, 37(3): 352-359.
[2]管鹏飞, 王兵, 吴义成, 等. 不均匀性: 非晶合金的灵魂[J]. 物理学报, 2017, 66(17): 159-200.
Guan Pengfei, Wang Bing, Wu Yicheng, et al. Heterogeneity: The soul of metallic glasses[J]. Acta Physica Sinica, 2017, 66(17): 159-200.
[3]Liu Kai, Dong Xianghuai, Shi Wen. Effect of pulsed current on AZ31B magnesium sheets during annealing[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(4): 735-740.
[4]黄金亮, 车晓舟, 曹兴国, 等. 电脉冲加热Fe₇₈B₁₃Si₉非晶合金的力性及磁性[J]. 洛阳工学院学报, 1996, 17(1): 7-11.
Huang Jinliang, Che Xiaozhou, Cao Xingguo, et al. The mechanical and magnetic properties of pulse current heated Fe₇₈B₁₃Si₉ amorphous alloy[J]. Journal of Luoyang Institute of Technology, 1996, 17(1): 7-11.
[5]耿遥祥, 王英敏. 铁基非晶合金局域结构与性能关联: 基于微合金化机理研究[J]. 金属学报, 2020, 56(11): 1558-1568.
Geng Yaoxiang, Wang Yingmin. Local structure-property correlation of Fe-based amorphous alloys: Based on minor alloying research[J]. Acta Metallurgica Sinica, 2020, 56(11): 1558-1568.
[6]Bian X, Zhao D, Kim J, et al. Controlling the distribution of structural heterogeneities in severely deformed metallic glass[J]. Materials Science and Engineering A, 2019, 752: 36-42.
[7]Spaepen F. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses[J]. Acta Metallurgica, 1977, 25(4): 407-415.
[8]Argon A. Plastic deformation in metallic glasses[J]. Acta Metallurgica, 1979, 27(1): 47-58.
[9]Pan J, Wang Y, Guo Q, et al. Extreme rejuvenation and softening in a bulk metallic glass[J]. Nature Communications, 2018, 9(1): 560.
[10]Heggen M, Spaepen F, Feuerbacher M. Creation and annihilation of free volume during homogeneous flow of a metallic glass[J]. Journal of Applied Physics, 2005, 97(3): 033506.
[11]Van Steenberge N, Sort J, Concustell A, et al. Dynamic softening and indentation size effect in a Zr-based bulk glass-forming alloy[J]. Scripta Materialia, 2007, 56(7): 605-608.
[12]Yiu P, Hsueh C H, Shek C H. Rapid thermoplastic formation of Fe-based metallic glass foil achieved by electropulsing[J]. Materials Letters, 2014, 136: 353-355.

[1]	Ma Luyi, Du Qingyin, Li Shijian, Yang Lixin, Liu Gang, Wang Xinyu. Simulation and calculation of heat treatment parameters and thermophysical properties of 16CrSiNi steel using JMatPro software [J]. Heat Treatment of Metals, 2024, 49(7): 42-46.
[2]	Li Zhenglong, Pang Jingyu, Tang Guangquan, Cheng Lufan, Zhang Caiwei, Hou Xingyu, Li Wen, Zhang Haifeng. Effect of deformation heat treatment on microstructure and properties of Ti₄₅Zr₂₀Nb₁₅V_(10-x)Al₁₀Mo_x refractory high entropy alloy [J]. Heat Treatment of Metals, 2024, 49(7): 47-53.
[3]	Yan Wenchao, Gao Bo, Xiao Lirong, Zhou Hao. Microstructure and mechanical properties of ultrafine grained heterostructured dual-phase steel prepared by warm rolling and intercritical annealing [J]. Heat Treatment of Metals, 2024, 49(7): 54-62.
[4]	Ji Xuanming. Recrystallized grain growth behavior and its effect on aging behavior of cold-rolled Ti-3.5Al-5Mo-4V alloy sheet [J]. Heat Treatment of Metals, 2024, 49(7): 63-69.
[5]	Liu Huashen, Sun Youping, He Jiangmei, Luo Guojian, Pei Mengyu. Effect of Al content and homogenization on microstructure and damping properties of Mg-Al binary alloys [J]. Heat Treatment of Metals, 2024, 49(7): 70-77.
[6]	Li Zhongbo, Wu Zhifang, Wu Run. Research progress of low alloy martensitic wear-resistant steel [J]. Heat Treatment of Metals, 2024, 49(7): 132-138.
[7]	Jiang Junjie, Wang Yongbiao, Xiao Zhiling, Fan Jianglei, Zhang Zhengwen. Effect of annealing temperature on microstructure and mechanical properties of selective laser melted TA15 titanium alloy [J]. Heat Treatment of Metals, 2024, 49(7): 241-248.
[8]	Lu Mingxia, Zhang Lei, Wang Xinshe. Effect of normalizing temperature on microstructure and mechanical properties of 36MnVS4 and 46MnVS5 steels for fracture splitting connecting rod [J]. Heat Treatment of Metals, 2024, 49(7): 249-253.
[9]	Jiang Shiyong, Chen Xiang, Lin Yuan, Zhang Wenkang. Effect of annealing temperature on microstructure and properties of ultra-high strength non-oriented silicon steel [J]. Heat Treatment of Metals, 2024, 49(7): 254-260.
[10]	Meng Pinpin, Zhang Xiaobo. Effect of annealing treatment on microstructure and mechanical properties of pure copper [J]. Heat Treatment of Metals, 2024, 49(7): 267-273.
[11]	Xu Shuangqian, Dai Zhiyong, Wang Ziyu. Effect of heat treatment process on microstructure and mechanical properties of Al-6.5Zn-2.3Mg-2.5Cu-0.1Zr-0.2Sc alloy [J]. Heat Treatment of Metals, 2024, 49(7): 274-280.
[12]	Liu Hongliang, Tang En, Lin Peng , Zhang Rui, Yuan Qing. Effect of pre-deformation before austenization on microstructure and properties of low carbon microalloyed nano steel [J]. Heat Treatment of Metals, 2024, 49(7): 301-306.
[13]	Chen Jie, Gao Tianyu, Wang Shuang, Wang Yong, Wang Liangliang. Heat treatment process of 600 MPa hydroelectric steel based on orthogonal analysis method [J]. Heat Treatment of Metals, 2024, 49(7): 307-312.
[14]	Zhao Xiqing, Wang Fujie, Zhang Bingjun. Effect of tempering on microstructure and properties of direct quenched A387Gr11CL2 steel plate [J]. Heat Treatment of Metals, 2024, 49(7): 322-325.
[15]	Wu Weijian, Liu Chengmiao, Li Quan. Effect of welding process on compatibility of 1Cr16Ni4Mo2Cu2W1VN steel and Co6B alloy surfacing layer [J]. Heat Treatment of Metals, 2024, 49(7): 326-330.

Effect of current annealing on properties and plastic deformation of Fe₇₈Si₉B₁₃ alloy

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments