| [1] |
Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin.
Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 10-16.
|
| [2] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [3] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [4] |
Chen Zhijie, Cui Tong.
Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 213-218.
|
| [5] |
Zhao Zishuo, Wu Meiping, Miao Xiaojin, Cui Chen, Gong Yuling.
Effect of laser power on microstructure and corrosion resistance of FeCoNiCrMo high-entropy alloy/graphene oxide composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 251-257.
|
| [6] |
Luo Jiandong, Hu Yanhong, Lin Yuzhou.
Application of low temperature nitriding process with double power supplies on 316 stainless steel
[J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
|
| [7] |
Shi Haifang, Li Qiang.
Effect of carbon content on microstructure and properties of Al0.5Co0.5NiCrFe high-entropy alloy coating
[J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
|
| [8] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [9] |
Lin Hongchun, Ma Dandan, Yu Shengwang, Ma Yong, Zhou Bing, Gao Jie, Hei Hongjun, Xue Yanpeng.
Preparation and corrosion resistance of highly adhesive superhydrophobic surface
[J]. Heat Treatment of Metals, 2022, 47(2): 193-199.
|
| [10] |
Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia.
Failure analysis of 20 steel equal-diameter tee
[J]. Heat Treatment of Metals, 2022, 47(2): 262-266.
|
| [11] |
Wang Xin, Liang Xiaokai, Sun Xinjun.
Corrosive wear resistance of low alloy martensitic steel containing antimony
[J]. Heat Treatment of Metals, 2022, 47(1): 38-43.
|
| [12] |
Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng.
Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface
[J]. Heat Treatment of Metals, 2022, 47(1): 185-191.
|
| [13] |
Jiang Xueting, Liu Gang, Zhou Xian, Xiao Feiyan, Liu Jing, Yang Feng.
Biological corrosion behavior of nitriding layer of Ti-6Al-4V alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 197-201.
|
| [14] |
Yan Tinglin, Gao Xiaoli, Wang Jiyuan.
Research progress of electrodeposited Ni-Fe alloy coating
[J]. Heat Treatment of Metals, 2021, 46(9): 15-20.
|
| [15] |
Qiao Jian, Liu Zheng, Gao Huiming, Yang Li.
Effect of aging time on microstructure and shear properties of Cu/In-Sn-2.5Ag/Cu solder joint
[J]. Heat Treatment of Metals, 2021, 46(9): 104-107.
|
