| [1] |
Zhao Nan, Liu Xuewei, Sun Mingjun, Xue Jun.
Microstructure and fatigue properties of low temperature coiling hot-rolled dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(5): 55-59.
|
| [2] |
Fu Yujing, Liu Hongliang, Fu Donghe, Chen Yu, Ma Feng.
Effect of H2 content in cooling stage on properties and surface quality of 800 MPa grade hot dip galvanized dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(2): 232-236.
|
| [3] |
Yang Peiyuan, Huo Qinghui, Chen Zhuo, Zhou Wei, Wang Hongbin.
Effect of dew point on surface oxidation behavior of DP590 dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(11): 97-102.
|
| [4] |
Li Huiyuan, Dai Jietao, Xian Lingbiao, Ren Jianping, Li Liejun.
Effect of annealing process on microstructure and properties of dual phase steel DP590GA
[J]. Heat Treatment of Metals, 2021, 46(1): 50-54.
|
| [5] |
Liu Jingbao, Zhang Hongbo, Geng Zhiyu, Wei Huanjun.
Microstructure and properties of continuous annealed DP980 high strength steel
[J]. HTM, 2020, 45(2): 42-45.
|
| [6] |
Wu Teng，Wu Run，Xiong Weiliang，Song Shupeng.
Effect of finishing rolling temperature on microstructure and mechanical properties of C-Mn hot-rolled dual phase steel
[J]. HTM, 2017, 42(4): 124-127.
|
| [7] |
Wang Yu, Cui Qingling, Li Jianping, Liu Xiaozhou.
Effect of annealing dew point on selective oxidation and galvanizability of TWIP steel
[J]. HTM, 2017, 42(2): 163-167.
|
| [8] |
Kuang Chunfu, Zheng Zhiwang, Wang Meng.
Effect of soaking temperature on microstructure and properties of 590 MPa hot-dip galvanized dual phase steel
[J]. HTM, 2016, 41(5): 133-136.
|
| [9] |
Zhao Qi1，Li Hui1，Yin Hongxia1，Dai Yongjuan2，Ji Renlong1.
Phase transformation behavior and influence of annealing temperature on mechanical properties of Al-containing DP steel
[J]. HTM, 2016, 41(3): 72-75.
|
| [10] |
Gu Hairong1, Zhao Zhengzhi1,2, Zhao Aimin1,2, Zhu Zhifeng1.
Effect of cooling processing parameters onmicrostructure and properties of 600 MPa grade hot-rolled dual phase steel
[J]. HTM, 2016, 41(11): 79-83.
|
| [11] |
Wang Yao 2，Li Chunfu1,2，Lin Yuanhua 1,2,3，Wang Yiwen2，Xiao Qi2.
Caculation of electronic parameters and strength of 10CrMnMoSi dual-phase steel after subcritical quenching
[J]. HTM, 2016, 41(10): 6-11.
|
| [12] |
Yao Mengjia1,2, Li Chunfu1,2, Xiao Qi1, 2, Deng Zhiguo1,2, Shen Wenzhu1,2.
Microstructure and deformation behavior of F/M dual phase steel with different content of martensite
[J]. HTM, 2015, 40(8): 49-54.
|
| [13] |
Teng Huaxiang1,2, Li Yuanpeng3, Jiang Sheming3, Zhang Qifu3.
Influence of dew point shifting on selective oxidation behavior of high strength dual phase steel
[J]. HTM, 2015, 40(4): 181-184.
|
| [14] |
Kuang Shuang, Qi Xiumei.
Numerical analysis on austenitization of cold-rolled dual phase steel during continuous annealing heating and soaking stage
[J]. HTM, 2015, 40(12): 49-53.
|
| [15] |
Qi Chunyu1,2, Wang Hehe1, Li Yuanpeng1, Jiang Sheming1, Zhang Qifu1, Yu Gangqiang1.
Effect of galvannealing parameters on surface coating properties of DP590 steel plate
[J]. HTM, 2015, 40(10): 151-154.
|
