Effect of annealing temperature on precipitate and mechanical properties of V-Ti-Mo steel

doi:10.13251/j.issn.0254-6051.2020.03.005

Abstract

Abstract:

Microstructure and mechanical properties of V-Ti-Mo steel were characterized after annealing at different temperatures. The results show that pearlite structure begins to decompose, and the amount of MC type precipitate in the experimental steels increases as the annealing temperature increasing. The MC type carbide in the hot rolled steel is mainly Ti(C, N), while (V, Mo)C gradually precipitates by increasing annealing temperature. The yield strength of the tested steel is calculated according to steel strengthening theory, the results show good agreement with the experimental data, which indicates that precipitation strengthening is the main reason for the strength increase after annealing.

Key words: V-Ti-Mo steel, annealing temperature, yield strength, precipitation strengthening

CLC Number:

TG142

Yu Wenchao, Xue Yanjun, Sun Ting, Wang Maoqiu, Shi Jie. Effect of annealing temperature on precipitate and mechanical properties of V-Ti-Mo steel[J]. HTM, 2020, 45(3): 20-24.

References

[1]雍岐龙. 钢铁材料中的第二相[M]. 北京: 冶金工业出版社, 2006.
[2]Gladman T. Precipitation hardening in metals[J]. Materials Science and Technology, 1999, 15(1): 30.
[3]汪小培, 赵爱民, 赵征志, 等. Ti-Mo低碳超高强钢中相间析出强化[J]. 北京科技大学学报, 2014, 36(9): 1183-1188.
Wang Xiaopei, Zhao Aimin, Zhao Zhengzhi, et al. Interphase precipitation strengthening in ultro-high strength low-carbon Ti-Mo beraing steel[J]. Journal of University of Science and Technology Beijing, 2014, 36(9): 1183-1188.
[4]孙超凡, 蔡庆伍, 陈振华, 等. 冷却制度对铁素体基Ti-Mo微合金钢超细碳化物析出行为的影响[J]. 材料工程, 2014(10): 47-52.
Sun Chaofan, Cai Qingwu, Chen Zhenhua, et al. Effect of cooling regime on precipitation of ultra-high carbides of Ti-Mo ferrite matrix microalloyed steel[J]. Journal of Material Engineering, 2014(10): 47-52.
[5]Yen H, Chen P, Huang C, et al. Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel[J]. Acta Materialia, 2011, 59(16): 6264-6274.
[6]张可, 雍岐龙, 孙新军, 等. 卷取温度对Ti-V-Mo复合微合金化超高强度钢组织及力学性能的影响[J]. 金属学报, 2015, 52(5): 529-537.
Zhang Ke, Yong Qilong, Sun Xinjun, et al. Precipitation behavior and mechanical properties of hot-rolled high strength Ti-Mo-bearing ferritic sheet steel[J]. Acta Metallurgical Sinica, 2015, 52(5): 529-537.
[7]王树森, 赵刚, 刘璇, 等. 回火温度对Mo-V -Ti 钢组织与性能的影响[J]. 鞍钢技术, 2016(4): 27-31.
Wang Shusen, Zhao Gang, Liu Xuan, et al. Effect of tempering temperature on microstructures and properties of Mo-V-Ti steel[J]. Angang Technology, 2016(4): 27-31.
[8]Wei Y, Shan Y Y, Yang K. Effect of TiN inclusions on the impact toughness of low-carbon microalloyed steels[J]. Metallurgical and Materials Transactions A, 2006, 37(7): 2147-2158.
[9]Chen C, Yen H, Kao F, et al. Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides[J]. Materials Science and Engineering A, 2009, 499(1): 162-166.
[10]Ansell G S, Arrott A. The strengthening mechanism of ferrous martensite[J]. Trans Metall Soc AIME, 1963, 227(10): 1080-1082.
[11]雍岐龙, 马鸣图, 吴宝榕. 微合金钢─物理和力学冶金[M]. 北京: 机械工业出版社, 1989: 65.
[12]Xu S S, Zhao Y, Chen D, et al. Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel[J]. International Journal of Plasticity, 2019, 113: 99-110.
[13]Gladman T, McLvor I D, Pickering F B. Some aspects of the structure-property relationships in high-carbon ferrite-pearlite steels[J]. Journal of Iron and Steel International, 1972, 210: 916-930.
[14]Hughes D A. Microstructure evolution slip patterns and flow stress[J]. Materials Science and Engineering A, 2001, 319: 46-54.

[1]	Dai Yongjuan, Wu Xiangxiang, Li Jiakun, Guo Dong, Wang Bo. Effect of annealing temperature on microstructure and properties of Fe-24.38Mn-0.44C TWIP steel [J]. Heat Treatment of Metals, 2022, 47(2): 146-152.
[2]	Huang Juan, Huang Yuanchun, Shen Zhenyu, Li Xiangyue, Zeng Yu, Yang Gengchen. Effect of finish rolling temperature and annealing temperature on microstructure and properties of 5052 aluminum alloy sheet [J]. Heat Treatment of Metals, 2021, 46(9): 79-84.
[3]	Zhang Hongliang, Feng Guanghong, Wang Baoshan. Strengthening mechanism of Nb(C, N) precipitation and controlled cooling process optimization of Nb-containing steel bars under direct rolling condition [J]. Heat Treatment of Metals, 2021, 46(8): 133-138.
[4]	Wang Jin, Yu Guoqing, Wang Guodi, Zhang Manxue, Feng Tian, Xie Niansuo, Jing Ran. Effect of annealing temperature on surface microstructure and corrosion properties of MAO-TC4 titanium alloy [J]. Heat Treatment of Metals, 2021, 46(6): 65-68.
[5]	Yu Yinjun, Zhao Shiyu, Zhang Ke, Li Zhaodong, Chen Zihao, Zhang Qing, Wang Xinzhi, Qian Jianqing. Effect of isothermal cooling time on microstructure transformation and hardness of a Ti-V-Mo microalloyed steel [J]. Heat Treatment of Metals, 2021, 46(6): 95-101.
[6]	Ma Xiaojie, Liu Lining, Chen Xiangguang, Zang Wei. Conductive property of Al-Er-Cu alloy for overhead wire [J]. Heat Treatment of Metals, 2021, 46(5): 156-159.
[7]	Yun Lu, Hao Xin. Effect of annealing temperature on residual stress, structure and corrosion resistance of magnetron sputtering TiN/TiCN film [J]. Heat Treatment of Metals, 2021, 46(5): 166-170.
[8]	Yu Runzhen, Zhao Feng, Yu Shengfu, Li Yongjie, Tang Lun. Microstructure, properties and T6 heat treatment process optimization for wire arc additive manufacturing ER2319 aluminum deposited metals [J]. Heat Treatment of Metals, 2021, 46(4): 49-59.
[9]	Han Rong, Liu Hongxi, Yu Wenchao, Wang Maoqiu, Shi Jie. Effect of tempering temperature on precipitation and mechanical properties of Ti-V-Mo microalloyed martensitic steel [J]. Heat Treatment of Metals, 2021, 46(12): 53-60.
[10]	Hou Junfeng, Xu Wang, Zhang Mingxu, Li Yongze, Dong Fuyuan. Effect of annealing temperature on mechanical properties of ECAP high-nitrogen austenitic stainless steel [J]. Heat Treatment of Metals, 2021, 46(11): 84-89.
[11]	Yin Hongxiang, Zhang Qian, Wu Yi, Zhang Heng, Zhao Sa. Effect of annealing temperature on microstructure and properties of 21Cr-0.3Cu ferritic stainless steel [J]. Heat Treatment of Metals, 2021, 46(10): 108-111.
[12]	Lu Wenjie, Luo Xian, Huang Bing, Li Pengtao, Yang Yanqing. Research progress on precipitation strengthening of FCC structure high-entropy alloys [J]. Heat Treatment of Metals, 2020, 45(9): 1-9.
[13]	Yan Shicai, Li Ying. Effect of annealing temperature on microstructure and properties of hot rolled 0Cr25Al5 wire steel [J]. Heat Treatment of Metals, 2020, 45(9): 121-124.
[14]	Yan Yongming, Zhang Ling, Wang Qian, Yuan Wufeng, Yu Wenchao, Wang Maoqiu. Dynamic constitutive model of 1000 MPa high-fragmentation steel [J]. Heat Treatment of Metals, 2020, 45(8): 70-75.
[15]	Liu Yifei, Lu Hui, Sun Shaoheng, Zhao Aimin. Effect of recrystallization annealing temperature on corrosion resistance of copper-bearing ferritic antibacterial stainless steel [J]. Heat Treatment of Metals, 2020, 45(5): 51-55.