Application of cryogenic treatment in ZL204 aluminum alloy

doi:10.13251/j.issn.0254-6051.2021.01.015

Abstract

Abstract: Influence of cryogenic treatment on mechanical properties and residual stress relief effect of ZL204 aluminum alloy was studied.The results show that the tensile strength,yield strength and elongation of the alloy increase when directly cryogenic treated after solution treatment and then artificial aged,and the effect of residual stress relief effect is better than the traditional relief aging and cycle heat treatment after aging.The best residual stress elimination process for ZL204 aluminum alloy is solution treated at 540 ℃ for 9 h with 60 ℃ water quenching,cryogenic treated at -196 ℃ for 1 h then stress relief aged for 1 h,and artificial aged at 175 ℃ for 3 h with air cooling.

Key words: cryogenic treatment, heat treatment, ZL204 aluminum alloy, residual stress

CLC Number:

TG146.2

Li Jingmin, Li Fengchun, Teng Yu, Zhou Wenfeng, Tang Guangping. Application of cryogenic treatment in ZL204 aluminum alloy[J]. Heat Treatment of Metals, 2021, 46(1): 80-83.

References

[1] 赵志远.铝和铝合金牌号与金相图谱速用速查及金相检验技术创新应用指导手册[M].北京:中国知识出版社,2005.
[2] 李桂荣,王宏明,袁雪婷,等.时效深冷循环处理7055铝合金的组织演变规律和性能特征[J].稀有金属材料与工程,2013,42(S2):251-254.
Li Guirong,Wang Hongming,Yuan Xueting,et al.Structure evolution and properties of 7055 aluminum alloy with cycle cryogenic treatment[J].Rare Metal Materials and Engineering,2013,42(S2):251-254.
[3] 王少辉.7085铝合金整体结构件淬火残余应力分析及其消减工艺研究[D].长沙:中南大学,2011.
[4] 孙伟.快凝高硅铝合金固溶时效及深冷处理工艺的研究[D].阜新:辽宁工程技术大学,2012.
Sun Wei.The study on solid solution aging and cryogenic treatment of spray deposited hypereutetic Al-Si alloy[D].Fuxin:Liaoning Technical University,2012.
[5] 钱士强,李曼萍,严敏杰,等.深冷处理对ZL201铝合金短时时效析出的影响[J].上海工程技术大学学报,2001,15(4):257-262.
Qian Shiqiang,Li Manping,Yan Minjie,et al.The influence of cryogenic treatment on short-ageing in supersaturated ZL201 aluminium alloy[J].Journal of Shanghai University of Engineering Scince,2001,15(4):257-262.
[6] 赵立东.深冷处理工艺对Al-Si系合金组织和性能的影响[D].阜新:辽宁工程技术大学,2004.
Zhao Lidong.Effects of cryogenic treatment on the microstructures and properties of Al-Si alloys[D].Fuxin:Liaoning Technical University,2004.
[7] 董立新,周友龙,何贤贵,等.提高7A04铝合金强度的工艺研究[J].热加工工艺,2011,40(12):185-187.
Dong Lixin,Zhou Youlong,He Xiangui,et al.Investigation on process for improving strength of 7A04 Al alloy[J].Hot Working Technology,2011,40(12):185-187.
[8] 季凯,倪赓,李小兵,等.深冷处理对6005A铝合金焊接接头组织与性能的影响[J].金属热处理,2016,41(12):127-130.
Ji Kai,Ni Geng,Li Xiaobing,et al.Effect of cryogenic treatment on microstructures and mechanical properties of welded joint of 6005A aluminum alloy[J].Heat Treatment of Metals,2016,41(12):127-130.
[9] 陈鼎,黎文献.深冷处理下铝和铝合金的晶粒转动[J].中南工业大学学报,2000,31(6):544-547.
Chen Ding,Li Wenxian.Grain preferred orientation of Al and Al alloys through cryogenic treatment[J].Journal of Central South University of Technology,2000,31(6):544-547.
[10] 汤光平.2A14铝合金去应力热时效的作用[J].机械工程材料,2011,35(5):43-46.
Tang Guangping.Effect of stress relief thermal aging for 2A14 aluminum alloy[J].Materials for Mechanical Engineering,2011,35(5):43-46.

[1]	Li Li, Zeng Yan, Wu Xiaochun. Heat treatment process optimization for 4Cr5Mo2VCo steel [J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
[2]	Wang Fangjun, Wang Dongzhe, Wan Hong, Shi Yao, Shen Tao. Effects of heat treatment and cold deformation on linear expansion coefficient of constant expansion alloy 4J32C [J]. Heat Treatment of Metals, 2022, 47(4): 199-203.
[3]	Wang Shaozhuo, Meng Han, Wang Fen, Fan Haiwei, Li Yan, Tang Chao. Heat treatment for improving mechanical properties of hypoxic TC4-LC and remelted TC4 alloys [J]. Heat Treatment of Metals, 2022, 47(4): 204-207.
[4]	Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling. Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel [J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
[5]	Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun. Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
[6]	Fan Yang, Yang Minghua, Chen Kaimin, Sun Bingyan. Effect of PWHT on microstructure and mechanical properties of electron beam welded joints of 31CrMoV9 steel [J]. Heat Treatment of Metals, 2022, 47(3): 57-60.
[7]	Chen Shanyong, Wang Kuaishe, Qiao Ke, Wang Wen. Effect of alkali heat treatment on corrosion resistance of friction stir processed AZ31 magnesium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 61-66.
[8]	Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang. Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel [J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
[9]	Zhang Ying, Wang Haojun, Chen Suming, Hu Guang, Ouyang Delai, Cui Xia, Hu Shengshuang. Effect of heat treatment on microstructure and mechanical properties of laser solid forming TB18 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 124-129.
[10]	Hai Xianü, Yang Yang, Huang Taiwei, Fan Wangzhan, Gui Weimin, He Liangliang. Heat treatment properties of 8620H steel with refined graded hardenability [J]. Heat Treatment of Metals, 2022, 47(3): 155-158.
[11]	Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang. Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
[12]	Long Liang, Hu Qixian, Luo Yun, Zheng Hongxiang, Wang Yujie. Optimization design of anti-distortion tooling for local heat treatment of large welded vessels [J]. Heat Treatment of Metals, 2022, 47(3): 234-238.
[13]	Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian. Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature [J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
[14]	Cui Ding, Che Yongping. Distortion control method of parts with internal spline [J]. Heat Treatment of Metals, 2022, 47(3): 252-256.
[15]	Dong Rui, Chen Lin, Cen Yaodong, Bao Xirong. Microstructure and fatigue crack growth of a bainitic steel under different heat treatments [J]. Heat Treatment of Metals, 2022, 47(2): 153-158.