Shot peening process test for spur gear parts

doi:10.13251/j.issn.0254-6051.2021.02.014

Abstract

CLC Number:

TG178

Yang Yang, Che Yongping, Hai Xianü, Li Yang, Wang Ye. Shot peening process test for spur gear parts[J]. Heat Treatment of Metals, 2021, 46(2): 81-86.

[1] 张新华.喷丸强化技术及其应用与发展[J].航空制造技术,2007(1):454-458.
Zhang Xinhua.Shot peening technology and its application and development[J].Aeronautical Manufacturing Technology,2007(1):454-458.
[2] 樊磊,张仁奇,李波,等.水射流喷丸对渗碳钢表层组织与裂纹扩展性能的影响[J].金属热处理,2020,45(9):129-133.
Fan Lei,Zhang Renqi,Li Bo,et al.Effect of water jet peening on microstructure and crack propagation of carburized steel[J].Heat Treatment of Metals,2020,45(9):129-133.
[3] 常晓东,刘道新,崔腾飞,等.渗碳与喷丸复合处理对18Cr2Ni4WA钢表面完整性及疲劳性能的影响[J].机械科学与技术,2013,32(11):1584-1590.
Chang Xianodong,Liu Daoxin,Cui Tengfei,et al.Influence of carburizing combined with shot peening on surface integrity and fatigue behavior of 18Cr2Ni4WA steel[J].Mechanical Science and Technology for Aerospace Engineering,2013,32(11):1584-1590.
[4] 康霞,殷广强,赵桂平.喷丸处理对马氏体时效超高强度钢疲劳性能的影响[J].金属热处理,2020,45(2):253-256.
Kang Xia,Yin Guangqiang,Zhao Guiping.Influence of shot peening on fatigue property of maraging ultra-high strength steel[J].Heat Treatment of Metals,2020,45(2):253-256.
[5] 朱美琳,姜传海,王根全,等.18Cr2Ni4WA钢齿轮表面喷丸强化试验研究[J].车用发动机,2012(1):89-92.
Zhu Meilin,Jiang Chuanhai,Wang Genquan,et al.Experimental research on surface shot peening of 18Cr2Ni4WA steel gear[J].Vehicle Engine,2012(1):89-92.
[6] Tosha K,Lu J.Effect of shot peening and grit blasting on surface integrity:Influence on residual stresses[J].Transactions of Nonferrous Metals Society of China,2006,16(Z2):230-235.
[7] 栾伟玲,涂善东.喷丸表面改性技术的研究进展[J].中国机械工程,2005,16(15):1405-1409.
Luan Weiling,Tu Shandong.Recent trends on surface modification technology of shot peening[J].China Mechanical Engineering,2005,16(15):1405-1409.
[8] 储继影,关占群,李占杰.喷丸强化效果和质量的表征指标及影响因素[J].汽轮机技术,2003,45(4):45-47.
Chu Jiying,Guan Zhanqun,Li Zhanjie.Spray the pill to enhance the result with the quantity's token index sign and affect the factor[J].Turbine Technology,2003,45(4):45-47.
[9] 曾元松,黄遐,李志强.先进喷丸成形技术及其应用与发展[J].塑性工程学报,2006,13(3):23-29.
Zeng Yuansong,Huang Xia,Li Zhiqiang.The application and development of advanced shot peen forming technologies[J].Journal of Plasticity Engineering,2006,13(3):23-29.
[10] 张立,陈再良.喷射流的变化对喷丸强度的影响[J].机械工程与技术,2015(4):93-100.
Zhang Li,Chen Zailiang.Influence of shot stream change on shot peening intensity[J].Mechanical Engineering and Technology,2015(4):93-100.

[1]	Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang. Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
[2]	Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian. Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature [J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
[3]	Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu. Effect of cryogenic treatment on surface properties of TC4 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
[4]	Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui. Post weld heat treatment process to eliminate welding distortion of large structural parts [J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
[5]	Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong. Effect of laser shocking on surface integrity of 690 high strength steel [J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
[6]	Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian. Numerical simulation and experimental verification of induction hardening of wind power inner gear ring [J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
[7]	Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili. Finite element simulation of quenching process of large aluminum alloy forgings [J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
[8]	Nie Xiaolong, Gao Jiaqiang, Meng Kairen, Wang Junyi, Liu Xinkuan. Fracture failure analysis of 60Si2Mn spring steel [J]. Heat Treatment of Metals, 2021, 46(8): 246-249.
[9]	Li Junheng, Wu Yunxin, Gong Hai. Effect of bulging on quenching residual stress of 2219 aluminum alloy ring [J]. Heat Treatment of Metals, 2021, 46(7): 114-119.
[10]	Zhang Yonglu, Ju Quan, Hu Man, Ma Huiping, Zhang Shixiao. Post weld heat treatment of GH3230 alloy [J]. Heat Treatment of Metals, 2021, 46(6): 116-119.
[11]	Wei Nasha, Yuan Ruize, Niu Xuemei, Chen Zhigang, Chen Zhi, Yan Xianguo. Control mechanism of residual stress in 35MnB alloy steel by deep cryogenic treatment [J]. Heat Treatment of Metals, 2021, 46(5): 104-110.
[12]	Yun Lu, Hao Xin. Effect of annealing temperature on residual stress, structure and corrosion resistance of magnetron sputtering TiN/TiCN film [J]. Heat Treatment of Metals, 2021, 46(5): 166-170.
[13]	Zhou Yongqiang. Causean analysis on longitudinal cracking of 35CrMo steel cylinder pin [J]. Heat Treatment of Metals, 2021, 46(4): 239-242.
[14]	Sun Jingli, Ke Linda, Xiao Meili, Du Lei, Chen Ge, Diao Wei, Nie Jingjing. Research progress on microstructure of selective laser melted TC4 titanium alloy [J]. Heat Treatment of Metals, 2021, 46(2): 30-36.
[15]	Shen Kang, Cai Wenhe, Du Shuangming, Dong Shuqing, Gao Dawei, Bai Yin. Effect of shot peening on high-temperature steam oxidation behavior of martensitic heat-resistant steel [J]. Heat Treatment of Metals, 2021, 46(2): 66-73.

Shot peening process test for spur gear parts

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments