Effect of annealing after cold drawing on mechanical properties and recrystallization process of Monel 400 alloy wire

doi:10.13251/j.issn.0254-6051.2022.01.010

Abstract

Abstract: Tensile test of annealed Monel 400 alloy wire was carried out by using ETM105D electronic tensile testing machine, and the microstructure evolution, mechanical properties and their relationship of the cold drawn Monel 400 alloy wire after different annealing treatments were studied by using Matlab-MTEX software to calculate recrystallization volume fraction. The results show that the image obtained by processing EBSD data with Matlab-METX software can intuitively present the evolution of grain in the specimen after annealing treatment, and more accurate statistics of the volume fraction of recrystallization. Good plasticity and sufficient strength can be obtained by annealing at 825 ℃ for 20 min.

Key words: Monel 400 alloy wire, recrystallization, MTEX, activation energy

CLC Number:

TG166.7

Zhang Tao, Zheng Wenjie, Li Caiju. Effect of annealing after cold drawing on mechanical properties and recrystallization process of Monel 400 alloy wire[J]. Heat Treatment of Metals, 2022, 47(1): 56-62.

References

[1]陆世英. 超级不锈钢和高镍耐蚀合金[M]. 北京: 化学工业出版社, 2012: 351.
[2]Arjmand M, Abbasi S M, Taheri A K, et al. Hot workability of cast and wrought Ni-42Cu alloy through hot tensile and compression tests[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(6): 1589-1597.
[3]马魁, 李哲, 陈重毅, 等. Monel-400合金高温力学性能及热脆分析[J]. 中国体视学与图像分析, 2012, 6(4): 95-100.
Ma Kui, Li Zhe, Chen Zhongyi, et al. Analysis on high temperature mechanical properties and hot brittleness of Monel-400 alloy[J]. Chinese Journal of Stereology and Image Analysis, 2012, 6(4): 95-100.
[4]Patil D H, Sadaiah M. The effect of the rolling direction, temperature, and etching time on the photochemical machining of Monel 400 microchannels[J]. Advances in Materials Science and Engineering, 2016, 6(4): 1-9.
[5]Roth H A, Davis C L, Thomson R C. Modeling solid solution strengthening in nickel alloys[J]. Metallurgical and Materials Transactions A, 1997, 28(6): 1329-1335.
[6]Galindo-Nava E I, Rivera-Díaz-del-Castillo P E J. Grain size evolution during discontinuous dynamic recrystallization[J]. Scripta Materialia, 2014(72/73): 1-4.
[7]Yang X Y, Ji Z S, Miura H, et al. Dynamic recrystallization and texture development during hot deformation of magnesium alloy AZ31[J]. Transactions of Nonferrous Metals Society of China, 2009, 19(1): 55-60.
[8]陆慧, 陈银莉, 韦贺, 等. 55SiCr弹簧钢中的残留奥氏体与碳化物[J]. 金属热处理, 2020, 45(5): 103-110.
Lu Hui, Chen Yinli, Wei He, et al. Retained austenite and carbide in 55SiCr spring steel[J]. Heat Treatment of Metals, 2020, 45(5): 103-110.
[9]赵瑞辉. 蒙乃尔合金NCu30材料焊接工艺[J]. 金属加工(热加工), 2015(8): 63-65.
[10]Ebrahimi G R, Momeni A, Ezatpour H R, et al. Dynamic recrystallization in Monel 400 Ni-Cu alloy: Mechanism and role of twinning[J]. Materials Science and Engineering A, 2019, 744(28): 376-385.
[11]Chao Q, Hodgson P D, Beladi H. Thermal stability of an ultrafine grained Ti-6Al-4V alloy during post-deformation annealing[J]. Materials Science and Engineering A, 2017, 694(10): 13-23.
[12]房尚强. EBSD系统中的花样标定与应力分析问题研究[D]. 合肥: 中国科学技术大学, 2019.
[13]李冬升, 王威, 商显耀, 等. 一种计算动态再结晶体积分数的方法: CN111208134A[P]. 2020-05-29.
[14]Bachmann F, Hielscher R, Schaeben H. Grain detection from 2d and 3d EBSD data-specification of the MTEX algorithm[J]. Ultramicroscopy, 2011, 111(12): 1720-1733.
[15]Savage D J, Mccabe R J, Knezevic M. An automated procedure built on MTEX for reconstructing deformation twin hierarchies from electron backscattered diffraction datasets of heavily twinned microstructures[J]. Materials Characterization, 2021, 171: 110808.
[16]Hielscher R, Silbermann C B, Schmidl E, et al. Denoising of crystal orientation maps[J]. Journal of Applied Crystallography, 2019, 52(5): 984-996.
[17]Bachmann F, Hielscher R, Schaeben H. Texture analysis with MTEX-free and open source software toolbox[J]. Solid State Phenomena, 2010, 160: 63-68.
[18]向柳, 辛社伟, 毛小南, 等. Ti-15Mo合金的再结晶行为及动力学[J]. 材料热处理学报, 2020, 41(10): 137-142.
Xiang Liu, Xin Shewei, Mao Xiaonan, et al. Recrystallization behavior and kinetics of Ti-15Mo alloy[J]. Transactions of Materials and Heat Treatment, 2020, 41(10): 137-142.