Effect of heat treatment on microstructure and properties of 3J53 alloy

doi:10.13251/j.issn.0254-6051.2023.04.013

Abstract

Abstract: Effect of heat treatment process on the microstructure and properties of the diaphragm material 3J53 alloy was studied. The results show that after solution at 920-1010 ℃ for 10 min, the 3J53 alloy can obtain uniform and fine grain structure but lower hardness. The grain size did not change obviously after solution at 980 ℃ for different time. After solution at 920-1010 ℃ for 10 min and aging at 670 ℃ for 5 h, the hardness is 302-346 HV0.2, which can not meet the requirements of pressure transmitter. After solution at 920 ℃ and cold rolling and then aging at 650-700 ℃ for 5 h, the hardness increases significantly, which reaches a peak value of 483 HV0.2 when aging at 670 ℃, that can meet the requirements of nuclear grade pressure transmitter. Compared with the imported products, it is found that there is no significant difference in the hardness, return difference performance and original range temperature influence performance of the domestic 3J53 alloy diaphragm specimen, which meet the requirements of domestic application.

Key words: nuclear grade pressure transmitter, constant elastic alloy, microstructure, measuring diaphragm, performance verification

CLC Number:

TG335

Li Xiaotao, Huang Haitang, Yang Jingyuan, He Qubo, Li Weimin, Zheng Yawen. Effect of heat treatment on microstructure and properties of 3J53 alloy[J]. Heat Treatment of Metals, 2023, 48(4): 79-84.

References

[1]张文博, 姜达郁, 巢锐. 核级压力变送器发展现状及国内产品改进思路[J]. 中国仪器仪表, 2022(6): 41-45.
Zhang Wenbo, Jang Dayu, Chao Rui. Development status and domestic product improvement ideas of nuclear grade pressure transmitter[J]. China Instrumentation, 2022(6): 41-45.
[2]聂绍忠. 核级压力变送器传感器烧结技术研究[J]. 自动化仪表, 2019, 40(6): 117-121.
Nie Shaozhong. Research on sintering technology of nuclear grade pressure transmitter sensor[J]. Process Automation Instrumentation, 2019, 40(6): 117-121.
[3]史去非, 余颖, 王颖, 等. 电阻温度计/温度计量测试丛书[M]. 北京: 中国计量出版社, 2009.
Shi Qufei, Yu Ying, Wang Ying, et al. Resistance Thermometer/Temperature Measurement Test Series[M]. Beijing: China Metrology Press, 2009.
[4]李永友, 李济林, 孙威. 传感器用恒弹性合金的研制[C]//2011 中国功能材料科技与产业高层论坛论文集 (第三卷). 2011.
Li Yongyou, Li Jilin, Sun Wei. Development of constant elastic alloy for sensor[C]//2011 China Functional Materials Technology and Industry Forum (Volume III). 2011.
[5]朱亚辉, 于一鹏. 谐振传感器用新型恒弹性合金研究[J]. 金属功能材料, 2018, 25(4): 50-53.
Zhu Yahui, Yu Yipeng. Study on new constant elastic alloy for resonant sensor[J]. Metallic Functional Materials, 2018, 25(4): 50-53
[6]朱亚辉, 李永友, 王东哲, 等. 固溶处理对新型 Fe-Ni-Cr-Ti 合金组织及性能的影响. [J]. 功能材料, 2018, 49(8): 08211-08216.
Zhu Yahui, Li Yongyou, Wang Dongzhe, et al. Effect of solution treatment on microstructure and properties of new Fe-Ni-Cr-Ti alloy[J]. Journal of Functional Materials, 2018, 49(8): 08211-08216.
[7]朱宝辉, 韩俊钢, 王宏亮, 等. Nb-40Ti-5.5Al 铌合金的组织和性能[J]. 稀有金属, 2012, 36(6): 870-875.
Zhu Baohui, Han Jungang, Wang Hongliang, et al. Microstructure and properties of Nb-40Ti-5.5Al niobium alloy[J]. Chinese Journal of Rare Metals, 2012, 36(6): 870-875.
[8]张玉成, 贾浩梅. 固溶处理对Incoloy825合金钢管组织和性能的影响[J]. 金属热处理, 2022, 47(9): 134-139.
Zhang Yucheng, Jia Haomei. Effect of solution treatment on microstructure and properties of Incoloy825 alloy pipe[J]. Heat Treatment of Metals, 2022, 47(9): 134-139.
[9]武希哲. 3J53 恒弹合金不同时效温度下的组织和硬度[C]//第三届弹性合金与工艺学术交流会论文集. 1991: 131-134.
Wu Xizhe. Microstructure and hardness of 3J53 constant elastic alloy aged at different temperatures[C]//Proceedings of the Third Symposium on Elastic Alloys and Technology. 1991: 131-134.
[10]侯利锋. Fe-Ni 基恒弹性合金效相变过程及性能的研究[D]. 太原: 太原理工大学, 2002.
Hou Lifeng. Study on the effective phase transformation process and properties of Fe-Ni based constant elastic alloy[D]. Taiyuan: Taiyuan University of Technology, 2002.
[11]黄友桥, 李望, 朱新平, 等. Inconel783高温合金螺栓的组织与织构[J]. 金属热处理, 2022, 47(9): 214-219.
Huang Youqiao, Li Wang, Zhu Xinping, et al. Microstructure and texture of Inconel783 superalloy bolt[J]. Heat Treatment of Metals, 2022, 47(9): 214-219.
[12]郭卫民, 潘雄, 王金太. 工艺参数对FeNi35Co20AlNbTi高温恒弹性合金性能的影响研究[J]. 功能材料, 2010, 41(8): 1383-1386.
Guo Weimin, Pan Xiong, Wang Jintai. Effect of process parameters on properties of FeNi35Co20AlNbTi high temperature constant elasticity alloy[J]. Journal of Functional Materials, 2010, 41(8): 1383-1386.
[13]孙振岩, 李春生, 崔建忠. 冷变形 2Cr19Ni9Mo 钢的时效处理[J]. 东北大学学报(自然科学版), 1998, 19(2): 143-145.
Sun Zhenyan, Li Chunsheng, Cui Jianzhong. Aging treatment of cold deformed 2Cr19Ni9Mo steel[J]. Journal of Northeastern University (Natural Science), 1998, 19(2): 143-145.

[1]	Li Ling, Wu Xiaochun. CCT and TTT curves of Cr3 type die casting steel 4Cr3Mo2V [J]. Heat Treatment of Metals, 2023, 48(4): 10-17.
[2]	Liu Yang, Wu Xiaolan, Rao Mao, Mao Xuejing, Gao Kunyuan, Wei Wu, Xiong Xiangyuan, Huang Hui. Effect of Er and Zr microalloying on microstructure and properties of Al-Zn-Mg alloy [J]. Heat Treatment of Metals, 2023, 48(4): 18-22.
[3]	Wang Zibo, Jiang Chang, Lu Hengchang, Man Tinghui, Zuo Jinzhong, Dong Han. Determination and analysis of continuous cooling transformation curves of SWRCH35K steel [J]. Heat Treatment of Metals, 2023, 48(4): 23-27.
[4]	Du Yifei, Yan Jiahe, Feng Yunli. Research progress on microstructure regulation and strengthening and toughening mechanism of medium Mn steel [J]. Heat Treatment of Metals, 2023, 48(4): 28-34.
[5]	Lai Zhenmin, Huang Zexiong, Jie Xiaohua, Mai Yongjin. Friction and wear properties of heterogeneous microstructure Cu-Cr-Zr alloy [J]. Heat Treatment of Metals, 2023, 48(4): 40-44.
[6]	Yang Miao, Lin Mao, Sun Fude, Liu Jun, Chen Zhe, Wang Haowei. Effect of solution treatment on microstructure and properties of TiB₂/7050Al composite [J]. Heat Treatment of Metals, 2023, 48(4): 53-59.
[7]	Zou Hang, Liu Man, Tian Junyu, Xu Guang. Microstructure and properties of ultra-high strength low carbon bainitic steel under rapid tempering process condition [J]. Heat Treatment of Metals, 2023, 48(4): 67-73.
[8]	Zhang Mingxu, Xu Wang, Li Yongquan, Dong Fuyuan. Effect of cold-rolling and annealing on microstructure and mechanical properties of CoCrNi medium-entropy alloy [J]. Heat Treatment of Metals, 2023, 48(4): 85-88.
[9]	Cheng Tijuan, Yu Hongyao, Bi Zhongnan, Du Jinhui. Effect of solution treatment on microstructure and mechanical properties of a novel nickel-cobalt-based superalloy [J]. Heat Treatment of Metals, 2023, 48(4): 97-103.
[10]	Cai Chunbo, Gao Shaowei, Gao Guili, Shi Dequan. Effect of pulse current on microstructure and mechanical properties of aged Al-Cu-Mn-Zr alloy [J]. Heat Treatment of Metals, 2023, 48(4): 104-110.
[11]	Xu Haifeng, Li Hai, Li Fengmin, Fu Shengmin, Ming Keyu, Yu Yan. Effects of alloy element and heat treatment on microstructure and properties of new-type slot edge steel [J]. Heat Treatment of Metals, 2023, 48(4): 148-154.
[12]	Zhang Mengxing, Ma Dangshen, Zhou Jian, Chi Hongxiao, Wang Changjun. Effect of scanning speed on formability of 718HH mould steel produced by selective laser melting [J]. Heat Treatment of Metals, 2023, 48(4): 155-160.
[13]	Wang Bo, Gao Kunyuan, Ding Yusheng, Wen Shengping, Huang Hui, Wu Xiaolan, Wei Wu, Nie Zuoren. Superplasticity of 5083 aluminum alloy containing Er and Zr [J]. Heat Treatment of Metals, 2023, 48(4): 178-183.
[14]	Zhang Tao, Zheng Wenjie, Li Caiju, Fang Yi. Effect of annealing process and carbon content on microstructure stability of Monel 400 alloy [J]. Heat Treatment of Metals, 2023, 48(4): 184-189.
[15]	Jiang Zhipeng, Chen Hao, Wu Xiaochun. Numerical simulation of vacuum high-pressure gas quenching cooling process for large die-casting die steel modules [J]. Heat Treatment of Metals, 2023, 48(4): 211-220.