Research progress on influence of electromagnetic field on microstructure and properties of aluminum alloys

doi:10.13251/j.issn.0254-6051.2024.06.041

Abstract

Abstract: Electromagnetic field treatment process of aluminum alloys was summarized, and the influence of electromagnetic field treatment process on microstructure and properties of aluminum alloys was analyzed from three levels: microstructure, macroscopic properties, and action mechanism. The factors influencing the selection of electromagnetic field treatment process parameters on aluminum alloys is summarized, and the mechanism of optimizing the microstructure and properties of aluminum alloys by electromagnetic field is revealed. Finally, the focus and direction of future research on electromagnetic field treatment process are discussed.

Key words: aluminum alloy, electromagnetic field, microstructure, properties, mechanism

CLC Number:

TG146.2

Zhong Zhendong, Fan Jintao, Wang Fusheng, Chen Yajun. Research progress on influence of electromagnetic field on microstructure and properties of aluminum alloys[J]. Heat Treatment of Metals, 2024, 49(6): 261-269.

References

[1]刘萌, 李新亚, 臧勇, 等. 固溶成形工艺对6016铝合金组织及力学性能的影响[J]. 金属热处理, 2023, 48(2): 138-143.
Liu Meng, Li Xinya, Zang Yong, et al. Effect of solution forming process on microstructure and mechanical properties of 6016 aluminum alloy[J]. Heat Treatment of Metals, 2023, 48(2): 138-143.
[2]胡武, 吴艳梅, 黄显赞, 等. 预处理对6082铝合金型材性能的影响[J]. 金属热处理, 2023, 48(7): 143-147.
Hu Wu, Wu Yanmei, Huang Xianzan, et al. Effect of pre-treatment on properties of 6082 aluminum alloy profiles[J]. Heat Treatment of Metals, 2023, 48(7): 143-147.
[3]王彬文, 陈先民, 苏运来, 等. 中国航空工业疲劳与结构完整性研究进展与展望[J]. 航空学报, 2021, 42(5): 1-39.
Wang Binwen, Chen Xianmin, Su Yunlai, et al. Research progress and prospect of fatigue and structural integrity for aeronautical industry in China[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(5): 1-39.
[4]郑元凯, 李龙飞, 金康, 等. Cu含量对重力铸造Al-Cu-Mg-Sc合金组织及力学性能的影响[J]. 金属热处理, 2022, 47(5): 53-58.
Zheng Yuankai, Li Longfei, Jin Kang, et al. Influence of Cu content on microstructure and mechanical properties of Al-Cu-Mg-Sc alloy fabricated by gravity die casting[J]. Heat Treatment of Metals, 2022, 47(5): 53-58.
[5]杨春苗, 王淑慧, 刘文文, 等. 热处理制度对喷射成形7A50铝合金组织性能的影响[J]. 金属热处理, 2021, 46(12): 236-240.
Yang Chunmiao, Wang Shuhui, Liu Wenwen, et al. Influence of heat treatment on microstructure and properties of spray formed 7A50 aluminum alloy[J]. Heat Treatment of Metals, 2021, 46(12): 236-240.
[6]段伟, 简思聪, 伍超群, 等. 基于CCD的多级时效工艺对6061铝合金性能的影响[J]. 金属热处理, 2021, 46(10): 96-100.
Duan Wei, Jian Sicong, Wu Chaoqun, et al. Effect of multi-stage aging on properties of 6061 aluminum alloy via CCD method[J]. Heat Treatment of Metals, 2021, 46(10): 96-100.
[7]王荣, 吴晓春, 闵永安. 铝合金压铸模的焊合熔损现象及其预防措施[J]. 金属热处理, 2005, 30(2): 68-72.
Wang Rong, Wu Xiaochun, Min Yongan. Soldering and melting-loss phenomenon ＆ their preventive measures in aluminum alloy casting dies[J]. Heat Treatment of Metals, 2005, 30(2): 68-72.
[8]Troitskii O A, Likhtman V I. The anisotropy of the action of electron and γ radiation on the deformation process of brittle zinc single crystals[J]. Soviet Physics Doklady, 1963, 148: 332-334.
[9]Kravchenko V Y. Effect of directed electron beam on moving dislocations[J]. Soviet Physics JETP, 1967, 24(6): 1676-1688.
[10]Alshits V I, Darinskaya E V, Kazakova O L, et al. Magnetoplastic effect in nonmagnetic crystals[J]. Materials Science and Engineering A, 1997, 234-236: 617-620.
[11]李红旗, 陈奇志, 王燕斌, 等. 磁场促进位错发射和运动的TEM原位研究[J]. 科学通报, 1997, 42(21): 2282-2284.
[12]Molotskii M I. Theoretical basis for electro- and magnetoplasticity[J]. Materials Science and Engineering A, 2000, 287(2): 248-258.
[13]刘兆龙, 胡海云, 范天佑. 磁致塑性的位错机理[J]. 北京理工大学学报, 2007, 27(2): 113-115.
Liu Zhaolong, Hu Haiyun, Fan Tianyou. Dislocation mechanism of magnetoplasticity[J]. Transactions of Beijing Institute of Technology, 2007, 27(2): 113-115.
[14]李沛思. 7055铝合金中的磁致塑性效应研究[D]. 镇江: 江苏大学, 2016.
[15]程江峰. 强磁场对2024铝合金组织性能的影响及其机制分析[D]. 镇江: 江苏大学, 2018.
[16]Li G R, Xue F, Wang H M, et al. Tensile properties and microstructure of 2024 aluminum alloy subjected to the high magnetic field and external stress[J]. Chinese Physics B, 2016, 25(10): 262-270.
[17]Tang Z J, Du H, Tao K M, et al. Effect of electropulsing on edge stretchability and corrosion resistance near the punched edge of a 2024T4 aluminum alloy sheet[J]. Journal of Materials Processing Technology, 2019, 263: 343-355.
[18]Pan D, Wang Y, Guo Q, et al. Grain refinement of Al-Mg-Si alloy without any mechanical deformation and matrix phase transformation via cyclic electro-pulsing treatment[J]. Materials Science and Engineering A, 2021, 807: 140916.
[19]Chen K, Zhan L H, Yu W F. Rapidly modifying microstructure and mechanical properties of AA7150 Al alloy processed with electropulsing treatment[J]. Journal of Materials Science and Technology, 2021, 95: 172-179.
[20]师亚洲, 逯广平, 高翌, 等. 脉冲磁场处理对7075铝合金性能及组织的影响[J]. 金属热处理, 2021, 46(9): 159-164.
Shi Yazhou, Lu Guangping, Gao Yi, et al. Effect of pulsed magnetic field treatment on properties and microstructure of 7075 aluminum alloy[J]. Heat Treatment of Metals, 2021, 46(9): 159-164.
[21]Akram S, Babutskyi A, Chrysanthou A, et al. Improvement of the wear resistance of nickel-aluminum bronze and 2014-T6 aluminum alloy by application of alternating magnetic field treatment[J]. Wear, 2021, 480-481: 203940.
[22]Akram S, Babutskyi A, Chrysanthou A, et al. Effect of alternating magnetic field on the fatigue behavior of EN8 steel and 2014-T6 aluminum alloy[J]. Metals, 2019, 9(9): 984.
[23]高翌, 杨屹, 杨刚, 等. 脉冲次数对电场处理7075铝合金组织和性能的影响[J]. 热加工工艺, 2019, 48(10): 83-86.
Gao Yi, Yang Yi, Yang Gang, et al. Effects of pulse times on microstructure and properties of 7075 aluminum alloy treated by electric field[J]. Hot Working Technology, 2019, 48(10): 83-86.
[24]Xiao A, Huang C, Cui X, et al. Impact of the pulse induced current on the microstructure and mechanical properties of the 7075-T6 aluminum alloy[J]. Journal of Alloys and Compounds, 2022, 911: 165021.
[25]Cheng Q, Ye L, Zhong Z, et al. Investigating the impact and mechanisms of electromagnetic treatment on stress corrosion performance in 7075 aluminum alloy[J]. Journal of Materials Science, 2024, 59(4): 1753-1767.
[26]Wang Hongming, Li Peisi, Zheng Rui, et al. Mechanism of high pulsed magnetic field treatment of the plasticity of aluminum matrix composites[J]. Acta Physica Sinica, 2015, 64(8): 087104.
[27]Xu J, Huang L, Xu Y, et al. Effect of pulsed electromagnetic field treatment on dislocation evolution and subsequent artificial aging behavior of 2195 Al-Li alloy[J]. Materials Characterization, 2022, 187: 111872.
[28]Babutskyi A, Mohin M, Chrysanthou A, et al. Effect of electropulsing on the fatigue resistance of aluminum alloy 2014-T6[J]. Materials Science and Engineering A, 2020, 772: 138679.
[29]Lu A L, Tang F, Luo X J, et al. Research on residual-stress reduction by strong pulsed magnetic treatment[J]. Journal of Materials Processing Technology, 1998, 74(1): 259-262.
[30]Wu S, Zhao H, Lu A, et al. A micro-mechanism model of residual stress reduction by low frequency alternating magnetic field treatment[J]. Journal of Materials Processing Technology, 2003, 132(1-3): 198-202.
[31]Cai Z, Huang X. Residual stress reduction by combined treatment of pulsed magnetic field and pulsed current[J]. Materials Science and Engineering A, 2011, 528(19): 6287-6292.
[32]李桂荣, 李超群, 韩松, 等. 磁场处理2024铝合金的塑性和微观机制[J]. 江苏大学学报(自然科学版), 2019, 40(3): 344-349.
Li Guirong, Li Chaoqun, Han Song, et al. Plasticity and microstructure of 2024 aluminum alloy treated by magnetic physics fields[J]. Journal of Jiangsu University (Natural Science Edition), 2019, 40(3): 344-349.
[33]Liu W, Otegi N, Orallo A, et al. Post-forming, electro-plastic effect internal stress reduction in AA5754 aluminum alloy[J]. Materials Science and Engineering A, 2022, 852: 143686.
[34]Sánchez Egea A J, González Rojas H A, Celentano D J, et al. Electroplasticity-assisted bottom bending process[J]. Journal of Materials Processing Technology, 2014, 214(11): 2261-2267.
[35]Lobanov L M, Kondratenko I P, Zhiltsov A V. Development of post-weld electrodynamic treatment using electric current pulses for control of stress-strain states and improvement of life of welded structures[J]. Materials Performance and Characterization, 2018, 7(4): 941-955.
[36]Li G, Chen J, Wang H, et al. Influence of static magnetic field on the microstructure and properties of 7055 aluminum alloy[J]. Rare Metal Materials and Engineering, 2019, 48(4): 1036-1045.
[37]Sun X, Ji Y, Xiao A, et al. Influence of single-pulse and high-amplitude current on springback and mechanical properties of AA5052 aluminum alloy sheets[J]. Materials Characterization, 2022, 194: 112337.
[38]Chen Z, Li B, Huang Q, et al. The effect of the electric pulse treatment on the microstructure and mechanical performance of the Al-Zn alloy[J]. Materials Science and Engineering A, 2020, 796: 140016.
[39]Tang Z, Du H, Lang L, et al. Experimental investigation into the electropulsing assisted punching process of 2024T4 aluminum alloy sheet[J]. Journal of Materials Processing Technology, 2018, 253: 86-98.
[40]Xiao A, Huang C, Wang S, et al. Effects of induced electro-pulsing and aging process on properties and microstructure of 7075 aluminum alloy[J]. Materials Characterization, 2022, 192: 112222.
[41]Wang S, Xiao A, Lin Y, et al. Effect of induced pulse current on mechanical properties and microstructure of rolled 5052 aluminum alloy[J]. Materials Characterization, 2022, 185: 111757.
[42]Wang S, Cui X, Xiao A, et al. Mechanical properties and microstructure evolution of pre-stretched aluminum alloy after induced electro-pulsing treatment[J]. Metals and Materials International, 2023, 29(3): 634-644.
[43]Sun Q, Wang H, Yu S, et al. Reducing stress corrosion cracking susceptibility of high-strength aluminum alloy and its fastener by a novel electromagnetic shocking treatment[J]. Journal of Alloys and Compounds, 2023, 960: 170917.
[44]Wang D, Li N, Han X, et al. Effect of electromagnetic bulging on fatigue behavior of 5052 aluminum alloy[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(6): 1224-1232.
[45]Soika A K, Sologub I O, Shepelevich V G, et al. Magnetoplastic effect in metals in strong pulsed magnetic fields[J]. Physics of the Solid State, 2015, 57(10): 1997-1999.
[46]Jung J, Ju Y, Morita Y, et al. Enhancement of fatigue life of aluminum alloy affected by the density of pulsed electric current[J]. International Journal of Fatigue, 2017, 103: 419-425.
[47]Sun Q, Liu L, Yu S, et al. Gradient phase transformation of Al-Zn-Mg-Cu alloy induced by nonlinear interface wetting under electromagnetic shocking treatment[J]. Journal of Materials Science, 2023, 58(41): 16239-16255.
[48]Conrad H. Electroplasticity in metals and ceramics[J]. Materials Science and Engineering A, 2000, 287(2): 276-287.[49]Hu G, Zhu Y, Tang G, et al. Effect of electropulsing on recrystallization and mechanical properties of silicon steel strips[J]. Journal of Materials Science and Technology, 2011, 27(11): 1034-1038.
[50]Zhu R, Jiang Y, Guan L, et al. Difference in recrystallization between electropulsing-treated and furnace-treated NiTi alloy[J]. Journal of Alloys and Compounds, 2016, 658: 548-554.
[51]Zhou Y Z, You Z, Guanhu H, et al. The healing of quenched crack in 1045 steel under electropulsing[J]. Journal of Materials Research, 2001, 16(1): 17-19.
[52]Okazaki K, Kagawa M, Conrad H. A study of the electroplastic effect in metals[J]. Scripta Metallurgica, 1978, 12(11): 1063-1068.
[53]Tang D W, Zhou B L, Cao H, et al. Thermal stress relaxation behavior in thin films under transient laser-pulse heating[J]. Journal of Applied Physics, 1993, 73(8): 3749-3752.
[54]Molotskii M, Fleurov V. Magnetic effects in electroplasticity of metals[J]. Physical Review B, 1995, 52(22): 15829-15834.