Heat Treatment of Metals ›› 2024, Vol. 49 ›› Issue (7): 100-105.DOI: 10.13251/j.issn.0254-6051.2024.07.015

• MICROSTRUCTURE AND PROPERTIES • Previous Articles     Next Articles

Effect of rare earth addition on microstructure and properties of Al-Mg-Si alloy

Chen Baoan1,2, Li Menglin1,2, Chen Rui1,2, Duo Junlong3, Han Yu1,2, Zhu Zhixiang1,2, Yang Changlong3, Miao Yaojun4   

  1. 1. State Key Laboratory of Advanced Power Transmission Technology, State Grid Smart Grid Research Institute Co., Ltd., Beijing 102209, China;
    2. Department of Electrical Engineering New Materials, State Grid Smart Grid Research Institute Co., Ltd., Beijing 102209, China;
    3. Shenyang Electric Power Supply Company, State Grid Liaoning Electric Power Supply Co., Ltd., Shenyang Liaoning 110003, China;
    4. Jiangsu Zhongtian Technology Co., Ltd., Nantong Jiangsu 226463, China
  • Received:2023-12-22 Revised:2024-04-03 Online:2024-07-25 Published:2024-08-29

Abstract: Single wires of Al-Mg-Si alloys with rare earth addition (Ce or Sc) and without rare earth(RE) addition were prepared by hot rolling and cold drawing, and aged at 175 ℃ for different time. Microstructure of the alloy wires was observed by SEM and TEM, while the tensile strength and elongation were obtained by tensile test with electrical universal testing machine, and the resistance was also tested on digital micro-ohmmeter. The results show that the morphologies and size characteristics of micro-scale AlFeSi particles are improved owing to the RE addition. During the aging process, Ce has no obvious effect on the characteristics of nanoscale precipitates, while Sc can inhibit the precipitation and growth process of nanoscale precipitates. Therefore, the β″ phase in Sc-containing alloys possesses minimum size and well-dispersed distribution. After aging at 175 ℃ for 4 h, considerably well-performed comprehensive properties are obtained for all the 3 alloys, among which the Ce-added alloy has the highest electric conductivity (about 56.2%IACS), while the Sc-added alloy exhibits the highest tensile strength (about 350 MPa).

Key words: Al-Mg-Si alloy, rare earth, microstructure, tensile strength, electrical conductivity

CLC Number: