[1] |
Qiao Jian, Liu Zheng, Gao Huiming, Yang Li.
Effect of aging time on microstructure and shear properties of Cu/In-Sn-2.5Ag/Cu solder joint
[J]. Heat Treatment of Metals, 2021, 46(9): 104-107.
|
[2] |
Wang Junhui, Cui Qingling, Zeng Linlin, Gao Xinyu, Liang Jiawei.
Microstructure evolution of Al-Si coating on hot stamping steel during austenitizing
[J]. Heat Treatment of Metals, 2021, 46(11): 220-225.
|
[3] |
Gong Li, Jia Juan, Xiong Wei, Cheng Zhaoyang, Bi Yunjie.
Effect of aluminum content on microstructure and properties of hot-dip galvanizing coating on IF steel
[J]. Heat Treatment of Metals, 2020, 45(7): 183-188.
|
[4] |
Yang Hongbo, Wang Hao, Yao Peiwen, Liu Huan, Shao Mingzeng.
Effect of service temperature on shear strength of TA2/Q235 explosive composite plate
[J]. Heat Treatment of Metals, 2020, 45(4): 128-131.
|
[5] |
Ren Jiangwei, Li Dong.
Microstructure evolution of Ni3Al nanocrystal during low temperature annealing
[J]. HTM, 2016, 41(6): 63-67.
|
[6] |
Lu Fayun1, 2, Zhang Junli1, 2, Wang Zhao1, 2, Zhao Feng1, 2,Guo Fuan1, 2.
Intermetallic compound evolution of 3104 alloy during homogenization
[J]. HTM, 2016, 41(1): 130-135.
|
[7] |
Shang Haikun1,Huang Yongan2,Hou Yapeng2,Zhang Laiqi2,Lin Junpin2.
Effects of Si content on microstructure and properties of intermetallic compounds for Mo-Si binary system
[J]. HTM, 2015, 40(8): 26-29.
|
[8] |
Tao Shiping1, Xie Hui1, Jia Lei2.
Characterization of precipitates in Cu-rich corner of Cu-Ni-Al ternary phase diagram
[J]. HTM, 2015, 40(11): 52-55.
|
[9] |
Zeng Xiangyong,Li Long,Zhou Dejing.
Growth behavior of intermetallic compounds at Al-Al-steel interface bonded by cold rolling
[J]. HTM, 2015, 40(10): 22-27.
|