| [1] |
Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin.
Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 10-16.
|
| [2] |
Lian Yibo, Yang Chunlei, Wang Guodong, Song Wei.
Effect of solution treatment on microstructure of GH4080A superalloy
[J]. Heat Treatment of Metals, 2022, 47(4): 46-52.
|
| [3] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [4] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [5] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [6] |
Sun Kai, Chen Yan, Yang Shaobin.
Effect of aging temperature on microstructure and hardness of laser selective melting TC21 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 155-158.
|
| [7] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [8] |
Zhang Jun, Zhao Sixin.
Spheroidizing annealing process of 16MnCrS5 steel for cold forging gear
[J]. Heat Treatment of Metals, 2022, 47(4): 185-188.
|
| [9] |
Chen Zhijie, Cui Tong.
Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 213-218.
|
| [10] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [11] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
| [12] |
Zhao Zishuo, Wu Meiping, Miao Xiaojin, Cui Chen, Gong Yuling.
Effect of laser power on microstructure and corrosion resistance of FeCoNiCrMo high-entropy alloy/graphene oxide composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 251-257.
|
| [13] |
Luo Jiandong, Hu Yanhong, Lin Yuzhou.
Application of low temperature nitriding process with double power supplies on 316 stainless steel
[J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
|
| [14] |
Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun.
Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
|
| [15] |
Sun Jian, Huang Zhenyi, Li Jinghui, Wang Ping.
Effect of solution treatment and aging on microstructure and hardness of Fe-Mn-Al-C light weight steel
[J]. Heat Treatment of Metals, 2022, 47(3): 34-38.
|
