Microstructure and properties of welded joint of high strength steel for automobiles

[1]

Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting. Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel [J]. Heat Treatment of Metals, 2022, 47(4): 1-9.

[2]

Fan Yang, Yang Minghua, Chen Kaimin, Sun Bingyan. Effect of PWHT on microstructure and mechanical properties of electron beam welded joints of 31CrMoV9 steel [J]. Heat Treatment of Metals, 2022, 47(3): 57-60.

[3]

Sun Dingbang, Wang Yongsheng, Gao Jie, He Zhiyong, Wu Yanxia, Zhou Bing, Ma Yong, Yu Shengwang. Effect of plasma surface metallizing Nb on diffusion welding performance of γ-TiAl alloy [J]. Heat Treatment of Metals, 2022, 47(2): 213-218.

[4]

Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui. Post weld heat treatment process to eliminate welding distortion of large structural parts [J]. Heat Treatment of Metals, 2022, 47(2): 236-242.

[5]

Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren. Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy [J]. Heat Treatment of Metals, 2022, 47(1): 130-134.

[6]

Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe. Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate [J]. Heat Treatment of Metals, 2022, 47(1): 135-141.

[7]

Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong. Effect of laser shocking on surface integrity of 690 high strength steel [J]. Heat Treatment of Metals, 2021, 46(9): 247-251.

[8]

Lin Zhiqing, Zhang Fucheng, Ma Hua, Wang Lin, Chen Chen, Xu Ming. Effect of FW&TMCP treatment on wear resistance of as-cast high manganese steel frog [J]. Heat Treatment of Metals, 2021, 46(8): 92-98.

[9]

Jian Xiaojun, Cui Baowei, Huang Yanjun, Kang Taotao, Wang Ping, Song Yue, Li Weiqiang. Effect of solution treatment temperature on mechanical and welding properties of GH4169 alloy forging [J]. Heat Treatment of Metals, 2021, 46(8): 121-124.

[10]

Ding Xuan, Gan Yurong, Zhang Chunju, Wang Liqiang, Yang Mingqiu, Li Hui. Effect of intermediate annealing on microstructure and properties of 6016 aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(8): 174-179.

[11]

Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei. Effect of solution temperature on microstructure and mechanical properties of ultra-high strength steel G33 [J]. Heat Treatment of Metals, 2021, 46(7): 160-164.

[12]

Li Canming. Production process of Q960E high strength and high toughness steel [J]. Heat Treatment of Metals, 2021, 46(7): 182-186.

[13]

Jia Dongsheng, Hong Zhenjun, Wang Xiaohai, Wang Maoqiu, Mao Lu, Zhang Ruijun. Effect of nitrogen-methanol atmosphere on hydrogen-induced fracture of45CrNiMoVA high strength steel [J]. Heat Treatment of Metals, 2021, 46(7): 233-237.

[14]

Xiao Daheng, Zhang Yajing, He Hang, Tuo Chengde, Yuan Rui, Wu Huibin. Heat treatment process and weldability of 100 mm thick S420 high strength steel [J]. Heat Treatment of Metals, 2021, 46(6): 107-110.

[15]

PDF