Mechanism of annealing softening of double-wall brazed tube

[1]

Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua. Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy [J]. Heat Treatment of Metals, 2022, 47(4): 86-92.

[2]

Feng Rui, Li Lilian, Tie Jinfang, Hou Jiaqiang, Mi Yiyuan. Effect of high temperature thermomechanical treatment on microstructure and properties of 20CrMnTiH steel forgings [J]. Heat Treatment of Metals, 2022, 47(3): 72-76.

[3]

Lu Yuhua, Wang Haizhou, Fu Rui, Li Fulin, Li Dongling, Huang Danqi, Cai Wenyi. Behavior of γ′ precipitates under high temperature creep of GH4096 superalloy with different solution treatment cooling rates [J]. Heat Treatment of Metals, 2021, 46(9): 173-179.

[4]

Wang Ni, Liu Xinbao, Zhu Lin, Li Bo, Quan Chen. Analysis of transient creep behavior of P91 steel [J]. Heat Treatment of Metals, 2021, 46(8): 20-25.

[5]

Pan Xuexin, Jiang Haichang, Feng Hui, Li Xuebin, Lu Yanren, Hu Xiaofeng, Fu Hong. Evolution of precipitated phases in high strength and high electrical conductivity Cu-Cr-Zr alloy during aging [J]. Heat Treatment of Metals, 2021, 46(7): 7-12.

[6]

Wang Cheng, Guo Hongli, Sun Jian, Li Defa. Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel [J]. Heat Treatment of Metals, 2021, 46(6): 111-115.

[7]

Wu Yatao, Huang Dejun, Yang Huijun, Zhang Min, Qiao Junwei. Room temperature and cryogenic temperature mechanical properties of partially recrystallized Fe₄₀Mn₁₀Cr₂₅Ni₂₅ high-entropy alloy [J]. Heat Treatment of Metals, 2021, 46(6): 160-167.

[8]

Li Ye, Xia Pengcheng, Xie Kun, Cao Meiqing, Tan Yunliang, Jin Xiaolong. Effect of annealing temperature on microstructure and tensile properties of Fe-Mn-Al-C steel [J]. Heat Treatment of Metals, 2021, 46(4): 77-82.

[9]

[10]

Shi Xiaoxia, Ren Huiping, Li Xiao, Wang Chao, Gong Xin. Study on boundary of efficient quenching and tempering process of 26CrMoVNbRE steel [J]. Heat Treatment of Metals, 2021, 46(3): 39-45.

[11]

Chen Qingyin, Sheng Yehong, Li Rui, Hou Jiapeng, Wang Qiang, Zhang Zhefeng. Evolution law and mechanisms of electrical conductivity of Al-Mg-Si alloy wire [J]. Heat Treatment of Metals, 2021, 46(3): 175-179.

[12]

[13]

Wang Keqiang, Liu Rendong, Guo Jinyu, Fu Wei, Huang Qiuju, Sun Rongsheng. Development of cold-rolled 800 MPa grade high strength low alloy steel for automobile [J]. Heat Treatment of Metals, 2021, 46(1): 120-124.

[14]

Wang Wenying, Wang Hui, Qu Shiyong. Bake hardening behavior of transformation induced plasticity steel TRIP590 [J]. Heat Treatment of Metals, 2020, 45(8): 43-46.

[15]

Wang Simin, Hu Zhihua, Wang Zhengyun, Luan Daocheng, Wang Nan, Chen Jie. Effect of tempering temperature on microstructure and properties of 22MnB5 steel for automobile [J]. Heat Treatment of Metals, 2020, 45(7): 32-36.

PDF