| [1] |
Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang.
Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
|
| [2] |
Gao Jie, He Chengxu, Song Wenle, Yang Fuyao, Liu Yang.
Effects of longitudinal magnetic annealing and tensile stress on magnetic characteristics and iron loss of 1K101 amorphous alloy ribbon
[J]. Heat Treatment of Metals, 2022, 47(3): 39-43.
|
| [3] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [4] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [5] |
Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian.
Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature
[J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
|
| [6] |
Li Mingxiang, Yang Ping, He Wei, Zhang Meng, Wang Wenbo.
Failure analysis of hydrogen induced delayed fracture of 50CrVA steel spring
[J]. Heat Treatment of Metals, 2022, 47(3): 257-260.
|
| [7] |
Li Yongshun, Xuan Weidong, Duan Fangmiao, Zhao Yujuan, Li Junjie, Wang Baojun, Ren Xingfu, Ren Zhongming.
Effect of stress on recrystallization of single crystal superalloy
[J]. Heat Treatment of Metals, 2022, 47(2): 48-52.
|
| [8] |
Min Xudong, Huang Yuanchun, Xiao Zhengbing, Liu Yu, Ren Xianwei, Zou Ti.
Effect of pre-treatment on microstructure and intergranular corrosion behavior of Al-Mg-Si alloy for automobile
[J]. Heat Treatment of Metals, 2022, 47(2): 78-85.
|
| [9] |
Lu Rui, Ke Wenmin, Kuang Qiao, Rao Liangbin, Ding Qi, Lu Jinxiang.
Heat treatment distortion control of aero-engine output shaft made of 16Ni3CrMoE steel
[J]. Heat Treatment of Metals, 2022, 47(2): 168-172.
|
| [10] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [11] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [12] |
Cui Cong, Gao Fei, Gao Ye, Liu Zhenyu.
Static softening analysis of 21Cr nickel saving duplex stainless steel during high temperature deformation process
[J]. Heat Treatment of Metals, 2022, 47(1): 79-87.
|
| [13] |
Nong Xin, Gao Jinzhong, Wu Junwu, Shi Chunsheng, Zhao Naiqin.
Stress relaxation mechanism of 1Cr18Ni9 steel helical compression spring
[J]. Heat Treatment of Metals, 2022, 47(1): 106-112.
|
| [14] |
Wang Man, Shen Qiang, Luo Youxin, Nai Qiliang, Wang Baoshun, Wu Minghua, Zhu Xiongming.
Effect of solution temperature and cold deformation on microstructure and low temperature impact properties of S32750 duplex stainless steel tube
[J]. Heat Treatment of Metals, 2022, 47(1): 233-238.
|
| [15] |
Meng Yuerui, Zhao Xianping, Zhou Bowen.
Cause analysis of r value decreasing of low carbon aluminum-killed steel sheet developed based on ferrite rolling process
[J]. Heat Treatment of Metals, 2021, 46(9): 211-215.
|
