| [1] |
Li Chao, Wang Teng, Sun Rongqiang, Yang Ping, Zhang Baiyong.
Analysis and improvement of point defects on surface of hot dipaluminum-silicon plated steel sheet
[J]. Heat Treatment of Metals, 2021, 46(3): 213-217.
|
| [2] |
Tian Fei, Wang Zirong, Li Zhaodong, Li Lei.
Cause and countermeasure of coarse grain defect in batch annealed Ti-IF steel
[J]. Heat Treatment of Metals, 2021, 46(2): 237-241.
|
| [3] |
Chen Yingying , Yan Fei.
Analysis on formation mechanism of spot defects on surface of electrogalvanized steel sheet
[J]. Heat Treatment of Metals, 2021, 46(10): 267-269.
|
| [4] |
Zou Longjiang, Qi Lin, Shi Shuyan, Liu Shutan.
Fracture failure analysis of 3Cr13 steel diesel cycle pump spindle
[J]. Heat Treatment of Metals, 2020, 45(7): 202-205.
|
| [5] |
Yuan Jingzhi, Shi Yuezhi, Xu Wenhua, Chen Lubin, Lü Yupeng.
Structure-defect analysis of crack failure in 42CrMo wind power spindle
[J]. Heat Treatment of Metals, 2020, 45(7): 206-209.
|
| [6] |
Zhao Haiqiang, Chen Hongye.
Formation mechanism and preventive measures of pitting defects on surface of cold rolled continuous annealing strip steel
[J]. Heat Treatment of Metals, 2020, 45(6): 236-238.
|
| [7] |
Liu Xiaofei, Liu Lixia, Gai Yanqing.
Analysis and improvement of fish scale defect formation mechanism on continuous annealed plate surface
[J]. Heat Treatment of Metals, 2020, 45(4): 209-211.
|
| [8] |
Wang Deyong, Zhang Qun, Qi Rui.
Reason analysis of punctiform and linear defects on GCr15 bearing steel ring after heat treatment
[J]. Heat Treatment of Metals, 2020, 45(10): 241-245.
|
| [9] |
Zhang Jiangbin, Chen Yuanqing, He Kezhun, Li Jian.
Analysis on black line defects in 7055 aluminum alloy extrusion profiles
[J]. HTM, 2020, 45(1): 251-253.
|
| [10] |
Sun Xiong, Liu Sheng, Wang Shutao, Yang Chao, Yang Qingxu, Li Xiqiang.
Analysis on black line defects in P91 steel welded joint aged at 650 ℃
[J]. HTM, 2020, 45(1): 254-258.
|
| [11] |
Luo Xiaoyang,Wang Jin, Zhao Xiaolong, Zhang Liang.
Control of surface oxide defect 440 MPa cold-rolled IF high strength steel strip containing P
[J]. HTM, 2017, 42(4): 195-199.
|
| [12] |
Wang Binning1, Song Renbo1, Tan Yao1, Hu Jianxiang2.
Inhomogeneity of properties and defects?after die pressing of 316L stainless steel wire for glasses frame
[J]. HTM, 2016, 41(7): 159-164.
|
| [13] |
Yang Wei, Li Tingting, Li Tengfei, Li Hualong.
Analysis and control for bright spot defect on surface of hot dip galvanized sheet
[J]. HTM, 2016, 41(7): 168-172.
|
| [14] |
Zhou Yongkun1, Zhao Xianrui2, Xu Hui2.
Failure analysis on fatigue crack of bimetal strip saw blade
[J]. HTM, 2016, 41(6): 176-179.
|
| [15] |
Li Pingping，Chen Kaimin，Wu Jianhua，Xu Luoping, Liang huilei.
Surface defects analysis of guide roller and counter measures
[J]. HTM, 2016, 41(6): 185-187.
|
