| [1] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [2] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [3] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [4] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [5] |
Liu Zhiqiao, Feng Qingxiao, Li Hualong, Li Tengfei.
Effect of annealing process on microstructure and mechanical properties of low carbon bainitic steel
[J]. Heat Treatment of Metals, 2022, 47(3): 53-56.
|
| [6] |
Luo Diqiang, Yu Yinhong, Zhang Zhenming, Feng Xiaoming, Liu Min, Lai Chaobin.
Effect of yttrium-based rare earth on inclusions and cryogenic temperature impact property of high strength shipbuilding steel
[J]. Heat Treatment of Metals, 2022, 47(3): 142-146.
|
| [7] |
Wu Yingfei, Sun Zhonghua, Wang Yufei, Wang Chengming, Zhang Yunfei, Peng Huifen.
Effect of homogenizing on microstructure and properties of Invar alloy ingot
[J]. Heat Treatment of Metals, 2022, 47(2): 130-136.
|
| [8] |
Yu Hongjun, Song Chuansongxin, Cheng Fuchao, Gao Zhizhe, Chen Xiaoyan, Wang Yongjin, Zhang Yingchao.
Microstructure and properties of a hypoeutectic high-Cr cast iron under different heat treatment conditions
[J]. Heat Treatment of Metals, 2021, 46(8): 56-60.
|
| [9] |
Zhao Peilin, Liu Chao, Wu Huiliang, Zheng Li.
Effect of normalizing temperature on microstructure and low temperature toughness of 355 MPa heavy section steel for marine engineering
[J]. Heat Treatment of Metals, 2021, 46(6): 102-106.
|
| [10] |
Sun Liguo, Zhou Jian, Ma Dangshen, Chi Hongxiao.
Effect of solution pretreatment after forging on annealed microstructure and impact property of H13 steel
[J]. Heat Treatment of Metals, 2021, 46(2): 130-135.
|
| [11] |
Gao Shi, Pan Xuefu.
Effect of Nb on microstructure and properties of medium-low carbon super-bainitic steel
[J]. Heat Treatment of Metals, 2021, 46(12): 124-129.
|
| [12] |
Peng Siyuan, Deng Xiangtao, Liang Liang, Fu Tianliang, Liu Ning, Wang Zhaodong.
Effect of quenching temperature on microstructure and properties of novel NM450 corrosion-wear resistant steel
[J]. Heat Treatment of Metals, 2021, 46(12): 223-228.
|
| [13] |
Gao Zhizhe, Chen Xiaoyan, Cheng Fuchao, Li Jiakang, Su Shengrui, Wang Yongjin.
Influence of intermediate high-temperature tempering process on microstructure and properties of carburized 15MnNi4MoA steel
[J]. Heat Treatment of Metals, 2021, 46(10): 178-181.
|
| [14] |
Zheng Jianjun, Fan Ziming, Liu Xiao, Qiao Xin, Gao Yunpeng.
Failure analysis of fastening bolts of one steam turbine valve cover
[J]. Heat Treatment of Metals, 2021, 46(10): 262-266.
|
| [15] |
Yu Chenyang, Chi Qiang, Zhang Weiwei, Hu Meijuan, Chen Qinglong, Ge Jialin.
Determination and analysis of SH-CCT curve of X80 pipeline steel with OD1422 mm
[J]. Heat Treatment of Metals, 2020, 45(6): 93-97.
|
