| [1] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [2] |
Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang.
Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
|
| [3] |
Huang Long, Deng Xiangtao, Wang Zhaodong.
Effect of tempering temperature on microstructure and properties of particle reinforced low-alloyed wear resistant steel
[J]. Heat Treatment of Metals, 2022, 47(3): 1-6.
|
| [4] |
Cui Cong, Gao Fei, Gao Ye, Liu Zhenyu.
Static softening analysis of 21Cr nickel saving duplex stainless steel during high temperature deformation process
[J]. Heat Treatment of Metals, 2022, 47(1): 79-87.
|
| [5] |
He Chan, Zou Dening, Zhao Jie, Chen Xingrun, Qian Zhangxin.
Flow stress constitutive relationship and processing map of super duplex stainless steel 2507
[J]. Heat Treatment of Metals, 2022, 47(1): 94-99.
|
| [6] |
Wang Man, Shen Qiang, Luo Youxin, Nai Qiliang, Wang Baoshun, Wu Minghua, Zhu Xiongming.
Effect of solution temperature and cold deformation on microstructure and low temperature impact properties of S32750 duplex stainless steel tube
[J]. Heat Treatment of Metals, 2022, 47(1): 233-238.
|
| [7] |
Chen Peng, Zhang Xiaoming, Pan Mingming.
Effect of annealing on microstructure and properties of a Fe-Cr-Al-Mn duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(6): 31-35.
|
| [8] |
Liu Yan, Gao Renqiang, Chen Xingrun, Qian Zhangxin.
Analysis of influencing factors of σ phase precipitation in2205 duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(3): 180-183.
|
| [9] |
Wang Jian, Meng Haojie, Li Peng, Li Guoping, Li Jun, Liu Jie, Han Peide.
Effect of shot peening and hydrochloric acid pickling on oxide layer microstructure of 2205 duplex stainless steel hot-rolled sheet
[J]. Heat Treatment of Metals, 2021, 46(2): 74-80.
|
| [10] |
Bao Shun, Liu Rongpei, Wang Baoshun, Wu Minghua, Luo Youxin, Yao Liang, Feng Han, Song Zhigang.
Effect of cerium additive on low temperature impact properties of S32750 super duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(11): 42-47.
|
| [11] |
Guan Di, Qu Meijing, Hua Fuan.
Effects of accumulative roll bonding temperature on microstructure and mechanical properties of AZ31 magnesium alloy
[J]. Heat Treatment of Metals, 2021, 46(11): 78-83.
|
| [12] |
Yuan Aoming, Li Jingkun, Gao Xiaodan, Ren Xueping.
Effect of cold rolling and aging process on σ phase precipitation of 2205 duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(10): 26-30.
|
| [13] |
Guo Yu, Chen Ji, Yang Meitong.
Effect of single pass large deformation cold rolling and annealing treatment on microstructure and properties of 2205 duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(10): 151-154.
|
| [14] |
Gao Xiaodan, Li Jingkun, Ren Xueping, Yan Qiang.
Effect of solid solution temperature on microstructure and microhardness of 2205 duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(1): 7-10.
|
| [15] |
Ning Xin, Song Zhigang, Feng Han, Huang Bo, Yu Zhichuan, Zheng Wenjie, He Jianguo, Zhu Yuliang.
Effect of nitrogen content on microstructure and mechanical properties of HPD-1 duplex stainless steel
[J]. Heat Treatment of Metals, 2020, 45(9): 210-214.
|
