Cause analysis and counter measure of fracturing pump head crack

[1]

Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun. Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings [J]. Heat Treatment of Metals, 2022, 47(4): 263-267.

[2]

Dong Rui, Chen Lin, Cen Yaodong, Bao Xirong. Microstructure and fatigue crack growth of a bainitic steel under different heat treatments [J]. Heat Treatment of Metals, 2022, 47(2): 153-158.

[3]

Wang Chunhua,Wang Feng , Wang Fengliang, Fang Hongjie, Yang Lijuan. Effect of multi-stage solid solution treatment on microstructure and properties of 7136-0.35La aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 124-128.

[4]

Zhou Jianbo, Zhang Jing, Zhang Leitao, Li Haitao, Fan Shuaiqi, Xu Jinfu. Effect of laser process parameters on crack rate and microstructure of Ni60/WC clad coating [J]. Heat Treatment of Metals, 2021, 46(9): 252-257.

[5]

Shi Keqing, Guo Fu, An Longsen, Chen Yun, Du Ziyang, Wu Meng, Xu Qinpei. Heat treatment process of 42CrMo4 steel wind power main shaft [J]. Heat Treatment of Metals, 2021, 46(8): 201-204.

[6]

Nie Xiaolong, Gao Jiaqiang, Meng Kairen, Wang Junyi, Liu Xinkuan. Fracture failure analysis of 60Si2Mn spring steel [J]. Heat Treatment of Metals, 2021, 46(8): 246-249.

[7]

Xu Hongxiang, Wang Hongwei, Zhang Heng, Wang Jun, Zhao Shaofu. Crack analysis of case-hardened 20Cr2Ni4 steel gear after assembly [J]. Heat Treatment of Metals, 2021, 46(8): 250-253.

[8]

Yang Qingxu, Wang Xue, Ma Junpeng, Yang Chao. Crack analysis of T23/12Cr1MoV dissimilar steel welded joints during PWHT in the water-wall of USC boiler [J]. Heat Treatment of Metals, 2021, 46(7): 218-222.

[9]

Song Quan, Dan Ting, Li Xiaoguang, Gao Mingsen, Cao Huihui. Fracture cause analysis of W6Mo5Cr4V2Al high speed steel twist drill [J]. Heat Treatment of Metals, 2021, 46(7): 229-232.

[10]

Lü Jing, Yang Qiquan, Zhang Qian, Hu Jie, Xu Xin. Cause analysis of cracks in bolt holes of cast steel wheel-mounted brake disc [J]. Heat Treatment of Metals, 2021, 46(7): 238-241.

[11]

Ji Guoqiang, Ge Guiming, Yu Lijuan, Zhong Jizhi. Analysis on cracking of 50CrV4 steel washer [J]. Heat Treatment of Metals, 2021, 46(7): 254-257.

[12]

Xiao Daheng, Zhang Yajing, He Hang, Tuo Chengde, Yuan Rui, Wu Huibin. Heat treatment process and weldability of 100 mm thick S420 high strength steel [J]. Heat Treatment of Metals, 2021, 46(6): 107-110.

[13]

[14]

Zhao Xin'e. Cracking analysis of 8418 steel barrel used for aluminum-melting [J]. Heat Treatment of Metals, 2021, 46(6): 236-239.

[15]

Jiao Li, Shang Haikun, He Jianfeng, Zhao Yingjun, Zhang Weimin, Li Weimin, Zhou Lanmei. Fracture failure analysis of 42CrMo steel high strength bolts for diesel engine [J]. Heat Treatment of Metals, 2021, 46(6): 245-249.

PDF