| [1] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [2] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [3] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [4] |
Sun Kai, Chen Yan, Yang Shaobin.
Effect of aging temperature on microstructure and hardness of laser selective melting TC21 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 155-158.
|
| [5] |
Zhang Jun, Zhao Sixin.
Spheroidizing annealing process of 16MnCrS5 steel for cold forging gear
[J]. Heat Treatment of Metals, 2022, 47(4): 185-188.
|
| [6] |
Wang Fangjun, Wang Dongzhe, Wan Hong, Shi Yao, Shen Tao.
Effects of heat treatment and cold deformation on linear expansion coefficient of constant expansion alloy 4J32C
[J]. Heat Treatment of Metals, 2022, 47(4): 199-203.
|
| [7] |
Wang Shaozhuo, Meng Han, Wang Fen, Fan Haiwei, Li Yan, Tang Chao.
Heat treatment for improving mechanical properties of hypoxic TC4-LC and remelted TC4 alloys
[J]. Heat Treatment of Metals, 2022, 47(4): 204-207.
|
| [8] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [9] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
| [10] |
Li Tianfu, Qu Shen, Dong Chen, Zhang Zhefeng.
Failure analysis on spindle bearing of numerical control machine tool
[J]. Heat Treatment of Metals, 2022, 47(4): 258-262.
|
| [11] |
Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun.
Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
|
| [12] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [13] |
Sun Jian, Huang Zhenyi, Li Jinghui, Wang Ping.
Effect of solution treatment and aging on microstructure and hardness of Fe-Mn-Al-C light weight steel
[J]. Heat Treatment of Metals, 2022, 47(3): 34-38.
|
| [14] |
Yang Chunmiao, Wang Shan, Wang Shuhui, Li Yanzhen, Liu Wenwen.
Influence of pre-aging time on microstructure and properties of 7A85 aluminum alloy during RRA process
[J]. Heat Treatment of Metals, 2022, 47(3): 44-47.
|
| [15] |
Wang Guodi, Jing Ran, Zhang Manxue, Feng Tian, Yu Guoqing, Xie Niansuo.
Effects of cold rolling deformation and recrystallization on microstructure and properties of TC4 alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 48-52.
|
