| [1] |
Zhang Jijun, Xing Yanfeng, Cao Juyong.
Effect of ultrasonic vibration on microstructure and properties of aluminum alloy produced by CMT wire arc additive manufacturing
[J]. Heat Treatment of Metals, 2022, 47(4): 159-164.
|
| [2] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Simulation of heating process for martensitic heat resistant steel G115 heavy pipe blanks
[J]. Heat Treatment of Metals, 2022, 47(4): 208-212.
|
| [3] |
Zhao Zishuo, Wu Meiping, Miao Xiaojin, Cui Chen, Gong Yuling.
Effect of laser power on microstructure and corrosion resistance of FeCoNiCrMo high-entropy alloy/graphene oxide composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 251-257.
|
| [4] |
Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin.
Research progress of laser modification technology for titanium alloy surface
[J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
|
| [5] |
Ding Tao, Zhang Yunhua, Li Junjie, Liu Jin, Liu Yan.
Research status and prospect of laser cladding technology on stainless steel surface
[J]. Heat Treatment of Metals, 2022, 47(2): 205-212.
|
| [6] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [7] |
Zang Yan, Wang Jianjun.
Simulation of end quenching process and prediction of hardenability of Cr-Ni-Mo gear steel
[J]. Heat Treatment of Metals, 2022, 47(2): 257-261.
|
| [8] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [9] |
Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi.
Preparation technology of laser clad Fe-based coating for shield sealing runway repair
[J]. Heat Treatment of Metals, 2022, 47(1): 202-211.
|
| [10] |
Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li.
Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel
[J]. Heat Treatment of Metals, 2021, 46(9): 223-228.
|
| [11] |
Gong Yuling, Wu Meiping, Cui Chen, Miao Xiaojin.
Effect of overlap rate on microstructure and properties of Ni60A clad coating on TC4 titanium alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 229-233.
|
| [12] |
Miao Xiaojin, Xia Sihai,Wu Meiping, Yu Jinghu, Zhao Zishuo, Cui Chen, Zhang Chunlei.
Effect of adding CeO2 on properties of Al-Ti laser clad coating on aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 234-240.
|
| [13] |
Zhou Jianbo, Zhang Jing, Zhang Leitao, Li Haitao, Fan Shuaiqi, Xu Jinfu.
Effect of laser process parameters on crack rate and microstructure of Ni60/WC clad coating
[J]. Heat Treatment of Metals, 2021, 46(9): 252-257.
|
| [14] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [15] |
Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili.
Finite element simulation of quenching process of large aluminum alloy forgings
[J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
|
