| [1] |
Xu Feng, Xiao Ying, Chen Qian, Deng Changchun, Sun Xiaohan.
Effect of cold rolling reduction rate on microstructure, texture and deep drawing properties of IF steel
[J]. Heat Treatment of Metals, 2022, 47(1): 250-254.
|
| [2] |
Tian Fei, Wang Zirong, Li Zhaodong, Li Lei.
Cause and countermeasure of coarse grain defect in batch annealed Ti-IF steel
[J]. Heat Treatment of Metals, 2021, 46(2): 237-241.
|
| [3] |
Cui Guibin, Ju Xinhua, Wang Zeyang, Yin Lixin, Yan Chunlian.
EBSD characterization of recrystallization behavior of IF steel during annealing
[J]. Heat Treatment of Metals, 2020, 45(9): 185-190.
|
| [4] |
Ren Zhiheng, Ren Huiping, Jin Zili, Li Wei.
Effect of continuous annealing on microstructure and properties of 440 MPa grade high strength IF steel containing lanthanum
[J]. HTM, 2020, 45(2): 76-80.
|
| [5] |
Chen Aihua, Li Hualong, Li Tengfei.
Influence of continuous annealing temperature on mechanical properties and texture of IF steel
[J]. HTM, 2016, 41(6): 37-41.
|
| [6] |
Yang Jichun1, Liu Xiangjun1, Lü Yanhong2, He Yaoyu1, Li Kun1, Yang Changqiao1.
Effects of deformation temperature on strain-stress curve and microstructure of IF steel
[J]. HTM, 2016, 41(6): 47-50.
|
| [7] |
Liu Yuyan, Xu Guofang, Jin Zili, Chen Lin, Luo Xinqi, Zhang Zhigang.
Effects of annealing time and rare earth element on microstructure and texture of
high-strength IF steel
[J]. HTM, 2016, 41(6): 58-62.
|
| [8] |
Liu Xiangjun，Yang Jichun，Yang Changqiao，Zhang Wenhuai，He Yaoyu，Li Kun.
Effect of deformation rate on flow stress and microstructure of Ti-IF and Ti+Ce-IF steel
[J]. HTM, 2016, 41(10): 53-56.
|
| [9] |
Ma Duo1, Zhang Hongmei1, Sun Chengqian2, Chen Yue1, Jia Hongbin1, Guo Ya’nan1.
Texture and grain boundary character distribution of fine-grain high-strength IF steel plate annealed for different time
[J]. HTM, 2015, 40(9): 49-54.
|
| [10] |
Zou Tao1,2, Wang Fuming1,2, Meng Qingyong1,2.
Thermodynamic calculation and analysis on equilibrium precipitate in Nb+Ti-IF steel
[J]. HTM, 2015, 40(7): 168-172.
|
| [11] |
Zhang Xiaoning.
Monte Carlo simulation of grain growth in annealing treatment of Ti-IF steel
[J]. HTM, 2015, 40(7): 172-175.
|
| [12] |
Yang Na1,2,3, Wang Ruizhen2.
Effect of annealing temperature on microstructure and properties of 440 MPa grade high strength IF steel
[J]. HTM, 2015, 40(4): 88-93.
|
| [13] |
Shi Jingrui, Jia Juan, Song Xinli.
Analysis on recrystallization microstructure and texture of Nb-doped IF steel
[J]. HTM, 2015, 40(3): 65-67.
|
| [14] |
Guo Weimin1, Sun Depeng2, Zhang Huayang3, Ding Ning 1, Shi Junbo1, Zhao Baoling1 .
Precipitates and deep-drawability of P added high strength IF steel
[J]. HTM, 2015, 40(2): 99-103.
|
| [15] |
Xiao Qi, Li Chunfu, Zhu Yike, Shao Dengquan, Wu Junjie, Yang Shizhou.
Influencing factors of IF steel texture formation and evolution
[J]. HTM, 2014, 39(6): 140-144.
|
