| [1] |
Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting.
Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
|
| [2] |
Chen Liansheng, Zhang Luyou, Tian Yaqiang, Yang Zixuan, Li Hongbin, Pan Hongbo, Wei Yingli.
CCT curves and microstructure and properties of low-carbon high strength marine steel
[J]. Heat Treatment of Metals, 2022, 47(4): 63-68.
|
| [3] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [4] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [5] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [6] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [7] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [8] |
Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang.
Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
|
| [9] |
Wang Qi, Wu Guangliang.
Effect of tempering temperature on microstructure and properties of 1100 MPa grade high-strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 146-150.
|
| [10] |
Sun Kai, Chen Yan, Yang Shaobin.
Effect of aging temperature on microstructure and hardness of laser selective melting TC21 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 155-158.
|
| [11] |
Zhang Jun, Zhao Sixin.
Spheroidizing annealing process of 16MnCrS5 steel for cold forging gear
[J]. Heat Treatment of Metals, 2022, 47(4): 185-188.
|
| [12] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [13] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
| [14] |
Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun.
Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
|
| [15] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
