| [1] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [2] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [3] |
Long Liang, Hu Qixian, Luo Yun, Zheng Hongxiang, Wang Yujie.
Optimization design of anti-distortion tooling for local heat treatment of large welded vessels
[J]. Heat Treatment of Metals, 2022, 47(3): 234-238.
|
| [4] |
Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian.
Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature
[J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
|
| [5] |
Cui Ding, Che Yongping.
Distortion control method of parts with internal spline
[J]. Heat Treatment of Metals, 2022, 47(3): 252-256.
|
| [6] |
Lu Rui, Ke Wenmin, Kuang Qiao, Rao Liangbin, Ding Qi, Lu Jinxiang.
Heat treatment distortion control of aero-engine output shaft made of 16Ni3CrMoE steel
[J]. Heat Treatment of Metals, 2022, 47(2): 168-172.
|
| [7] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [8] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [9] |
Gai Miaomiao, Yang Juan, Zheng Xiping.
Heat treatment process for improving warpage distortion of 35CrMnSi steel disc
[J]. Heat Treatment of Metals, 2022, 47(1): 281-283.
|
| [10] |
Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong.
Effect of laser shocking on surface integrity of 690 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
|
| [11] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [12] |
Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili.
Finite element simulation of quenching process of large aluminum alloy forgings
[J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
|
| [13] |
He Li.
Vacuum heat treatment of 0Cr17Ni4Cu4Nb stainless steel base
[J]. Heat Treatment of Metals, 2021, 46(8): 189-191.
|
| [14] |
Li Junheng, Wu Yunxin, Gong Hai.
Effect of bulging on quenching residual stress of 2219 aluminum alloy ring
[J]. Heat Treatment of Metals, 2021, 46(7): 114-119.
|
| [15] |
Wang Tao, Zhao Kang.
Influence of oil groove mechanism of mesh belt furnace on taper distortion of deep groove ball bearings
[J]. Heat Treatment of Metals, 2021, 46(6): 24-26.
|
