Cause and resolutions on uneven hardness of 75Cr1 steel after quenching

[1]

Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong. Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel [J]. Heat Treatment of Metals, 2022, 47(4): 122-127.

[2]

Li Li, Zeng Yan, Wu Xiaochun. Heat treatment process optimization for 4Cr5Mo2VCo steel [J]. Heat Treatment of Metals, 2022, 47(4): 133-140.

[3]

[4]

Huo Jinyuan, Chen Guojun, Zheng Dexin. Induction hardening process of internal spline in tulip of constant speed drive shaft [J]. Heat Treatment of Metals, 2022, 47(4): 178-181.

[5]

Zhang Jun, Zhao Sixin. Spheroidizing annealing process of 16MnCrS5 steel for cold forging gear [J]. Heat Treatment of Metals, 2022, 47(4): 185-188.

[6]

[7]

Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin. Microstructure and properties of C69 gear steel for aviation after high temperature carburizing [J]. Heat Treatment of Metals, 2022, 47(4): 219-225.

[8]

Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling. Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel [J]. Heat Treatment of Metals, 2022, 47(4): 226-230.

[9]

Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun. Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings [J]. Heat Treatment of Metals, 2022, 47(4): 263-267.

[10]

Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun. Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 14-19.

[11]

Sun Jian, Huang Zhenyi, Li Jinghui, Wang Ping. Effect of solution treatment and aging on microstructure and hardness of Fe-Mn-Al-C light weight steel [J]. Heat Treatment of Metals, 2022, 47(3): 34-38.

[12]

Yang Chunmiao, Wang Shan, Wang Shuhui, Li Yanzhen, Liu Wenwen. Influence of pre-aging time on microstructure and properties of 7A85 aluminum alloy during RRA process [J]. Heat Treatment of Metals, 2022, 47(3): 44-47.

[13]

Sun Guojin, Gao Zhiwen, Cui Xiaoyan, Gao Kekun, Sun Li. Effect of dual liquid quenching on microstructure and hardness of 9Cr2Mo steel roller [J]. Heat Treatment of Metals, 2022, 47(3): 88-91.

[14]

Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei. Effect of quenching temperature on microstructure and properties of a low cobalt secondary hardening steel [J]. Heat Treatment of Metals, 2022, 47(3): 92-96.

[15]

Cheng Tijuan, Gan Bin, Yu Hongyao, Zhou Haijing, Guo Caiyu, Bi Zhongnan, Du Jinhui. Effect of solution treatment on structure and properties of a novel nickel-based superalloy [J]. Heat Treatment of Metals, 2022, 47(3): 107-112.

PDF