| [1] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [2] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [3] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [4] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [5] |
Luo Diqiang, Yu Yinhong, Zhang Zhenming, Feng Xiaoming, Liu Min, Lai Chaobin.
Effect of yttrium-based rare earth on inclusions and cryogenic temperature impact property of high strength shipbuilding steel
[J]. Heat Treatment of Metals, 2022, 47(3): 142-146.
|
| [6] |
Wu Yingfei, Sun Zhonghua, Wang Yufei, Wang Chengming, Zhang Yunfei, Peng Huifen.
Effect of homogenizing on microstructure and properties of Invar alloy ingot
[J]. Heat Treatment of Metals, 2022, 47(2): 130-136.
|
| [7] |
Gao Yongwang, Kong Xiangling, Li Pengming, Liu Yue.
Effect of discharge temperature during annealing at 750 ℃ on microstructure and properties of QT450-10 nodular cast iron
[J]. Heat Treatment of Metals, 2022, 47(1): 261-265.
|
| [8] |
Ding Xuan, Gan Yurong, Jiang Aijuan, Li Hui, Yang Mingqiu.
Influence of aging treatment on microstructure and properties of 7A55 aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 120-123.
|
| [9] |
Yu Hongjun, Song Chuansongxin, Cheng Fuchao, Gao Zhizhe, Chen Xiaoyan, Wang Yongjin, Zhang Yingchao.
Microstructure and properties of a hypoeutectic high-Cr cast iron under different heat treatment conditions
[J]. Heat Treatment of Metals, 2021, 46(8): 56-60.
|
| [10] |
Li Mengge, Cheng Juqiang, Yin Sibo.
Microstructure and properties of bainitic non-quenched and tempered steel with different section size
[J]. Heat Treatment of Metals, 2021, 46(8): 65-69.
|
| [11] |
Zhang Mingqiao, Fu Mingjiao, Zhao Xiaoguang, Fu Chaozheng, Wang Hongyu, Li Zhuolin.
Effect of carbon content on microstructure and properties of SA-508 Gr.3 steel heavy forgings
[J]. Heat Treatment of Metals, 2021, 46(7): 79-83.
|
| [12] |
Liu Tianzeng, Wang Ke, Cheng Anzhong, Li Hongliang.
Effect of stabilization treatment on second phase and properties of347H stainless steel
[J]. Heat Treatment of Metals, 2021, 46(7): 149-154.
|
| [13] |
Li Mengge, Cheng Juqiang, Yin Sibo.
Effect of heat treatment and cooling process on microstructure and properties of bainitic steel tie-rods
[J]. Heat Treatment of Metals, 2021, 46(7): 178-181.
|
| [14] |
Liu Jianfeng, Yu Jianlin, Ge Qilu, Qiu Shengtao, Tang Xiaoyong.
Effect of original microstructure and annealing process on spheroidizing effect of high carbon fine blanking steel SK85
[J]. Heat Treatment of Metals, 2021, 46(6): 36-40.
|
| [15] |
Zhao Peilin, Liu Chao, Wu Huiliang, Zheng Li.
Effect of normalizing temperature on microstructure and low temperature toughness of 355 MPa heavy section steel for marine engineering
[J]. Heat Treatment of Metals, 2021, 46(6): 102-106.
|
