| [1] |
Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting.
Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
|
| [2] |
Chen Dongjun, Li Guangyang, Liu Gang.
Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
|
| [3] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [4] |
Wang Fangjun, Liu Yinglong, Shi Yao, Wan Hong, Liu Binbin.
Effect of isothermal annealing treatment on microstructure and properties of Inconel 625 alloy foil
[J]. Heat Treatment of Metals, 2022, 47(3): 77-81.
|
| [5] |
Li Yongshun, Xuan Weidong, Duan Fangmiao, Zhao Yujuan, Li Junjie, Wang Baojun, Ren Xingfu, Ren Zhongming.
Effect of stress on recrystallization of single crystal superalloy
[J]. Heat Treatment of Metals, 2022, 47(2): 48-52.
|
| [6] |
Zhu Lin, Cheng Xianglong, Zou Xiyang.
Heat treatment process for 26CrMo4 steel
[J]. Heat Treatment of Metals, 2022, 47(1): 271-275.
|
| [7] |
Wang Haibo, Xu Zhenlin, Hu Xuewen, Peng Huan.
Hydrogen embrittlement susceptibility of a hot-rolled ultra-high strength complex phase steel
[J]. Heat Treatment of Metals, 2021, 46(8): 51-55.
|
| [8] |
Kong Lingli, He Ruijun, Liu Hang, Cheng Yifei.
Oxidation analysis on surface of Ni-based Ni-Co-W-Ta-Al-Cr-Mo-Re-Nb-Hf single crystal superalloy after vacuum heat treatment
[J]. Heat Treatment of Metals, 2021, 46(8): 61-64.
|
| [9] |
Wu Ying, Zeng Qiang, Xiao Huijin, Zhu Shaowei.
Effect of annealing treatment on microstructure and properties of 3D printed CoCrFeMnNi high-entropy alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 192-196.
|
| [10] |
Zhang Mei, Sun Guosheng, Qin Dongyang, Du Linxiu.
Behavior of martensite reverse transformation and austenite recrystallization of cold-rolled 304 stainless steel
[J]. Heat Treatment of Metals, 2021, 46(7): 51-55.
|
| [11] |
Li Caiqiong, Kong Debin, Yu Xinxiang.
Effect of solution treatment on microstructure and properties of Al-8.8Zn-2.0Mg-2.1Cu-0.1Zr-0.1Ce alloy
[J]. Heat Treatment of Metals, 2021, 46(6): 53-58.
|
| [12] |
Li Ye, Xia Pengcheng, Xie Kun, Cao Meiqing, Tan Yunliang, Jin Xiaolong.
Effect of annealing temperature on microstructure and tensile properties of Fe-Mn-Al-C steel
[J]. Heat Treatment of Metals, 2021, 46(4): 77-82.
|
| [13] |
Zeng Qiang, Wu Ying, Xiao Huijin, Zhu Shaowei.
Effect of heat treatment on microstructure and tensile properties of Inconel 718 alloy prepared by selective laser melting
[J]. Heat Treatment of Metals, 2021, 46(10): 122-126.
|
| [14] |
Hou Yudong, Jing Cainian, Ding Xiaoyun, Wu Cong.
Effect of strain rate on microstructure and properties ofhigh strength steel for automobile
[J]. Heat Treatment of Metals, 2020, 45(9): 71-76.
|
| [15] |
Kong Xianglei, Huang Guojian, Zhou Jing, Wang Yang.
Tensile properties anisotropy of L485M pipeline steel
[J]. Heat Treatment of Metals, 2020, 45(6): 124-128.
|
