Tribological performance of AT13/MoS2 composite coatings prepared by plasma spraying

doi:10.13251/j.issn.0254-6051.2015.07.023

HTM

Previous Articles Next Articles

Tribological performance of AT13/MoS₂composite coatings prepared by plasma spraying

1. State Key Laboratory of Oil and Gas Reservoir and Exploitation, Southwest Petroleum University; 2. Research Institute of Oil Production Engineering in Daqing Oilfield

Online:2015-07-27 Published:2015-08-06

Abstract

CLC Number:

TG174.4

He Junbo1, Li Chunfu1, Yao Mengjia1, Sun Yanan1,2, Hou Yu2. Tribological performance of AT13/MoS₂composite coatings prepared by plasma spraying[J]. HTM, doi: 10.13251/j.issn.0254-6051.2015.07.023.

[1]	Li Jingyang, Wang Wenbo, Qin Lin, He Longbin, La Lingmin, Zhang Jianlin, Duan Xinglu. Friction and wear properties of nitrided layer of TD3 titanium alloy [J]. Heat Treatment of Metals, 2021, 46(9): 258-261.
[2]	Xie Jing, Xie Shan, Quan Qiongrui, Li Xin. Metallography technology of plasma sprayed Al₂O₃ ceramic coating [J]. Heat Treatment of Metals, 2021, 46(4): 210-216.
[3]	Zhu Xiaoning, Pan Qing, Li Yibo, Jiang Xuepeng. High temperature rheological behavior and constitutive model of 316LN austenitic stainless steel [J]. Heat Treatment of Metals, 2021, 46(11): 9-16.
[4]	Cui Jing, Guo Yuzhu, Pang Ming, Yang Guangfeng. Defect analysis and mechanical properties of supersonic plasma sprayed ZrO₂ coating [J]. Heat Treatment of Metals, 2020, 45(8): 216-221.
[5]	Liu Haijun, Gao Weimin, Tao Chong. High temperature friction properties of NiCoCrAlYTa-Al₂O₃ composite coating by atmospheric plasma spraying [J]. Heat Treatment of Metals, 2020, 45(4): 194-198.
[6]	Song Jinsong, Jia Zhining, Zhang Tianxu, Xu Xiaodong, Xie Ying, Yan Dianran. Effect of Ti on microstructure and properties of plasma sprayed Fe-Al₂O₃-FeAl₂O₄ composite coating [J]. Heat Treatment of Metals, 2020, 45(4): 199-203.
[7]	Gao Shun, Tian Xiaodong, Zhang Mengyao. Microstructure and properties of B-Al composite coatings on TC4 titanium alloy [J]. HTM, 2020, 45(3): 11-14.
[8]	Hu Haifeng, Li Xiao, Wang Lianhai, Ma Qiang, Liu Xinjian. Effect of graphene on friction properties of miro-arc oxidation films produced on ZL109 aluminum alloy piston [J]. HTM, 2020, 45(2): 231-234.
[9]	Cao Yuxia, Liu Jinqiang, Sun Jingwei, Wang Zhilin, Zhao Wenwu, Hao Bin. Properties of atmospheric plasma-sprayed NiCr/Cr₃C₂ composite coating [J]. Heat Treatment of Metals, 2020, 45(12): 179-183.
[10]	Wang Yunliang1, 2, Deng Changguang2, Zhan Zhaolin1, Zhang Jifu2. Thermal shock resistance and failure mechanism of CMAS deposited PS-PVD 7YSZ coating [J]. HTM, 2017, 42(4): 175-179.
[11]	Zhang Shan, Li Qiang, Zheng Zhenhuan. Oxidation and corrosion resistance of Cr3C2-NiCr coating at high temperature [J]. HTM, 2016, 41(9): 32-37.
[12]	Peng Ruzhen1, Li Rongxing1, Yu Xiaohua1, Xie Gang2. Effects of atmospheric plasma sprays parameters on deposition efficiency of TiB2 wettable cathode coatings [J]. HTM, 2016, 41(3): 37-42.
[13]	Duan Jinhui1,3, Pei Wang1,3, Liang Yin 1,3, Huang Feng3, Yang Xikun2. Microstructure and friction properties of WS2/TiB2 solid self-lubricant coatings [J]. HTM, 2016, 41(3): 104-109.
[14]	Cao Yuxia1, 2. Oxidation properties of the APS NiCoCrAlY/Al2O3-30%B4C composite coating [J]. HTM, 2016, 41(3): 147-150.
[15]	Guo Yan, Li Taijiang, Li wei, Wang Caixia . Microstructure and properties of TiCrAlSiCN coating [J]. HTM, 2016, 41(11): 16-20.

Tribological performance of AT13/MoS₂composite coatings prepared by plasma spraying

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments