Friction and wear performance of in-situ synthesized TiC composite strengthened coating on gray cast iron

doi:10.13251/j.issn.0254-6051.2015.08.014

HTM

Previous Articles Next Articles

Friction and wear performance of in-situ synthesized TiC composite strengthened coating on gray cast iron

State Key Laboratory of Material Processing and Die &Mould Technology, Huazhong University of Science and Technology

Online:2015-08-25 Published:2015-09-07

Abstract

CLC Number:

TG174.44

Zhao Hang, Li Jianjun, Zheng Zhizhen, Wang Aihua, Huang Qiwen. Friction and wear performance of in-situ synthesized TiC composite strengthened coating on gray cast iron[J]. HTM, doi: 10.13251/j.issn.0254-6051.2015.08.014.

[1]	Chen Zhijie, Cui Tong. Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating [J]. Heat Treatment of Metals, 2022, 47(4): 213-218.
[2]	Luo Jiandong, Hu Yanhong, Lin Yuzhou. Application of low temperature nitriding process with double power supplies on 316 stainless steel [J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
[3]	Ding Tao, Zhang Yunhua, Li Junjie, Liu Jin, Liu Yan. Research status and prospect of laser cladding technology on stainless steel surface [J]. Heat Treatment of Metals, 2022, 47(2): 205-212.
[4]	Qian Yu, Cui Gongjun, Bian Canxing, Kou Ziming. Preparation and high-temperature tribological properties of WS₂ reinforced CoCrTi composites [J]. Heat Treatment of Metals, 2021, 46(12): 94-99.
[5]	Wei Yongqiang, Song Rufan, Jiang Zhiqiang. Effect of pulsed bias frequency on microstructure and properties of TiSiN film [J]. Heat Treatment of Metals, 2021, 46(11): 213-219.
[6]	Guo Huimin, Li Bo, Zhang Liqun, Tao Jinglei, Huang Wei, Pei Xiuyuan, Xiao Junfeng, Nan Qing. Effect of real TGO interface topography on interface stress of thermal barrier coatings [J]. Heat Treatment of Metals, 2021, 46(11): 232-235.
[7]	Chen Mingxuan, Ma Qiang, Meng Junsheng, Li Chengshuo, Shi Xiaoping. Research progress of high-entropy alloy coating [J]. Heat Treatment of Metals, 2021, 46(9): 7-14.
[8]	Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li. Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(9): 223-228.
[9]	Xia Tongchuan, Liu Ting, Zhang Lin, Fang Zhao, Li Mingxi. Microstructure and wear resistance of laser clad Fe/NiCr-Cr₃C₂ composite coating [J]. Heat Treatment of Metals, 2021, 46(5): 196-201.
[10]	Meng Jie, Tian Linhai, Liu Ying, Zhou Bing, Wu Yucheng, Yu Shengwang, Wu Yanxia. Effects of different gas flow ratio on structure and tribological properties of Cu/a-C∶H films [J]. Heat Treatment of Metals, 2021, 46(2): 100-104.
[11]	Wang Qiang, Zhai Le, Niu Wenjuan, Zhang Mingxing. Effect of vacuum annealing treatment on microstructure and properties of Al-based composites by cold spray process [J]. Heat Treatment of Metals, 2021, 46(1): 19-27.
[12]	Liu Zonghan, Zhu Liang, Lin Qiaoli, Zhang Aihua, Li Chu. Preparation of Ti₃SiC₂ coating by electrical explosion powder spraying method [J]. Heat Treatment of Metals, 2021, 46(1): 138-142.
[13]	Zhang Peng, Liu Xueliang, Zhou Yu, Jia Dongmei. Analysis and control of color difference and black spots defects on the surface of DP980-GA dual-phase steel [J]. Heat Treatment of Metals, 2021, 46(1): 230-234.
[14]	Xue Wenli, Lu Tao, Huang Jiahua, Guo Deliang. Effect of vacuum heat treatment on thermal cycling life of APS-NiCoCrAlY+APS-YSZ thermal barrier coating [J]. Heat Treatment of Metals, 2020, 45(12): 47-52.
[15]	Shen Dachen, Ye Hong, Wang Yanqing, Liu Yue, Li Li, Xiao Xinyu, She Hongyan. Microstructure and properties of laser clad multi-layer Ni-based coating on Cr12MoV steel surface [J]. Heat Treatment of Metals, 2020, 45(12): 169-174.

Friction and wear performance of in-situ synthesized TiC composite strengthened coating on gray cast iron

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments