Oxidation resistance of high velocity oxygen fuel sprayed NiCoCrAlY/Al2O3 composite coating

doi:10.13251/j.issn.0254-6051.2015.08.017

HTM

Previous Articles Next Articles

Oxidation resistance of high velocity oxygen fuel sprayed NiCoCrAlY/Al₂O₃ composite coating

1.Department of Environmental and Chemical Engineering, Tangshan College; 2. State Key Laboratory of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences

Online:2015-08-25 Published:2015-09-07

Abstract

CLC Number:

TG174.453

Cao Yuxia1, Du Lingzhong2, Zhang Weigang2, Huang Chuanbing2. Oxidation resistance of high velocity oxygen fuel sprayed NiCoCrAlY/Al₂O₃ composite coating[J]. HTM, doi: 10.13251/j.issn.0254-6051.2015.08.017.

[1]	Xia Tongchuan, Liu Ting, Zhang Lin, Fang Zhao, Li Mingxi. Microstructure and wear resistance of laser clad Fe/NiCr-Cr₃C₂ composite coating [J]. Heat Treatment of Metals, 2021, 46(5): 196-201.
[2]	Chen Zixin, Zhou Houming, Zhu Yuxu, Zhang Zhehao, He Fangjia, Xu Caixing, Liu Gang. Microstructure and properties of laser clad Ni-Al composite coatings on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(11): 226-231.
[3]	Li Zhihong, Ding Hao, Zhu Shigen. Effect of electrical contact strengthening on microstructure and properties of Ni/Cu composite coatings [J]. Heat Treatment of Metals, 2020, 45(8): 228-232.
[4]	Zhang Leitao, Zhang Hongxing, Liu Dexin, Zhang Weiqiang, Wang Xuesong, Dai Jiaoyan, Xu Jinfu. Research progress on causes and control of cracks in laser clad composite coatings [J]. Heat Treatment of Metals, 2020, 45(8): 233-239.
[5]	Liu Haijun, Gao Weimin, Tao Chong. High temperature friction properties of NiCoCrAlYTa-Al₂O₃ composite coating by atmospheric plasma spraying [J]. Heat Treatment of Metals, 2020, 45(4): 194-198.
[6]	Song Jinsong, Jia Zhining, Zhang Tianxu, Xu Xiaodong, Xie Ying, Yan Dianran. Effect of Ti on microstructure and properties of plasma sprayed Fe-Al₂O₃-FeAl₂O₄ composite coating [J]. Heat Treatment of Metals, 2020, 45(4): 199-203.
[7]	Gao Shun, Tian Xiaodong, Zhang Mengyao. Microstructure and properties of B-Al composite coatings on TC4 titanium alloy [J]. HTM, 2020, 45(3): 11-14.
[8]	Liu Donghua, Zhou Kangning, Zhou Jinsong, Zhang Binjuan, Chen Lei, Ke Jin, Liu Xiubo. Microstructure and properties of NiMoSi laser clad layer on surface of 304 stainless steel [J]. HTM, 2020, 45(3): 30-34.
[9]	Cao Yuxia, Liu Jinqiang, Sun Jingwei, Wang Zhilin, Zhao Wenwu, Hao Bin. Properties of atmospheric plasma-sprayed NiCr/Cr₃C₂ composite coating [J]. Heat Treatment of Metals, 2020, 45(12): 179-183.
[10]	Li Qi, Shi Yongjun, Sun Rui, Wang Ruihai, Zhai Changmin. Temperature field simulation and experimental verification of Invar36/Ni60 composite coating by induction cladding [J]. HTM, 2020, 45(1): 69-75.
[11]	TANG You liang1 *, CAI Wei ping2, ZHANG Jing1. Laser cladding preparation and characterization of Ni based composite coating [J]. HTM, 2017, 42(4): 180-184.
[12]	Cheng Yu, Ding Hao, Zhu Shigen. Effect of preheating method on depth and properties of nitrogen carbon and oxygen composite coating on 3Cr13 stainless steel [J]. HTM, 2016, 41(9): 119-121.
[13]	Wu Shaohua1, Shi Gaolian1, Lu Xiaolong2, Liu Xiubo2. ?Wear?resistance of NiCr/Cr3C2-20%WS2 coating on titanium alloy by laser cladding [J]. HTM, 2016, 41(6): 79-84.
[14]	Zhang Tiangang1, Sun Ronglu1,2. Effect of laser power on titanium alloy surface Ni-based composite coatings [J]. HTM, 2016, 41(3): 57-60.
[15]	Cao Yuxia1, 2. Oxidation properties of the APS NiCoCrAlY/Al2O3-30%B4C composite coating [J]. HTM, 2016, 41(3): 147-150.

Oxidation resistance of high velocity oxygen fuel sprayed NiCoCrAlY/Al₂O₃ composite coating

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments