| [1] |
Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu.
Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel
[J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
|
| [2] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [3] |
Wang Shujing, Wang Tonghao, Wang Jian, Li Yuping, Han Peide.
Effect of B-Ce composite microalloying on microstructure and mechanical properties of S31254 super austenitic stainless steel
[J]. Heat Treatment of Metals, 2022, 47(2): 14-19.
|
| [4] |
Cui Yan, Dong Heqian, Cao Leigang, Yang Yue, Meng Yi.
Microstructure and mechanical properties of 55%SiCp/2024Al composite during aging process
[J]. Heat Treatment of Metals, 2022, 47(1): 142-148.
|
| [5] |
Wang Ming, Li Wenjin, Zhang Xu, Cheng Lili, Xu Yang.
Effect of annealing temperature on mechanical properties of Al/IF steel multilayer composites with high rolling ductility
[J]. Heat Treatment of Metals, 2022, 47(1): 255-260.
|
| [6] |
Ji Linlin, Li Changsheng, Sun Jianrong, Gou Zhou, Zhang Hao.
Preparation and tribological properties of W6Mo5Cr4V2/A100 composites
[J]. Heat Treatment of Metals, 2021, 46(9): 42-46.
|
| [7] |
Ren Junpeng, Wang Yu, Dong Cuige, Zhao Jun.
Effect of Cu addition on microstructure and properties of SiCp/Al-Si composites
[J]. Heat Treatment of Metals, 2021, 46(8): 36-41.
|
| [8] |
Zheng Xiaoping, Xie Wenjie, Cao Tong, Xiao Guangyao, Tian Yaqiang, Chen Liansheng.
Interface microstructure and properties of 7075/6061 bimetallic ingot prepared by squeeze composite casting
[J]. Heat Treatment of Metals, 2021, 46(6): 186-190.
|
| [9] |
Xia Tongchuan, Liu Ting, Zhang Lin, Fang Zhao, Li Mingxi.
Microstructure and wear resistance of laser clad Fe/NiCr-Cr3C2 composite coating
[J]. Heat Treatment of Metals, 2021, 46(5): 196-201.
|
| [10] |
Meng Jie, Tian Linhai, Liu Ying, Zhou Bing, Wu Yucheng, Yu Shengwang, Wu Yanxia.
Effects of different gas flow ratio on structure and tribological properties of Cu/a-C∶H films
[J]. Heat Treatment of Metals, 2021, 46(2): 100-104.
|
| [11] |
Qian Yu, Cui Gongjun, Bian Canxing, Kou Ziming.
Preparation and high-temperature tribological properties of WS2 reinforced CoCrTi composites
[J]. Heat Treatment of Metals, 2021, 46(12): 94-99.
|
| [12] |
Zhang Zhanzhan, Ning Jiaqing, Zuo Lingli, Liao Haiyang.
Effect of process parameters on interfacial microstructure of WC particle reinforced surface composite and steel substrate
[J]. Heat Treatment of Metals, 2021, 46(11): 131-136.
|
| [13] |
Chen Zixin, Zhou Houming, Zhu Yuxu, Zhang Zhehao, He Fangjia, Xu Caixing, Liu Gang.
Microstructure and properties of laser clad Ni-Al composite coatings on Cr12MoV steel
[J]. Heat Treatment of Metals, 2021, 46(11): 226-231.
|
| [14] |
Wang Qiang, Zhai Le, Niu Wenjuan, Zhang Mingxing.
Effect of vacuum annealing treatment on microstructure and properties of Al-based composites by cold spray process
[J]. Heat Treatment of Metals, 2021, 46(1): 19-27.
|
| [15] |
Zhao Yuncai, Peng Tao.
Effect of composite rare earth oxides on microstructure and tribological properties of Ti-Al/WC coating
[J]. Heat Treatment of Metals, 2020, 45(9): 215-219.
|
