Effect of trace boron on phase transformation of S355-J1 low carbon steel

doi:10.13251/j.issn.0254-6051.2015.09.021

HTM

Previous Articles Next Articles

Effect of trace boron on phase transformation of S355-J1 low carbon steel

1. Wide Plate and Coil Plant of Nanjing Iron and Steel Co., Ltd.; 2. Key Laboratory of High-End Steel Materials Jiangsu; 3. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing; 4. School of Materials Science and Engineering, Jiangsu University

Online:2015-09-25 Published:2015-10-10

Abstract

CLC Number:

TG142.1⁺3

Cai Kesen1, Yao Yongkuan2, Liu Weijian3, Li Xiang2, Huo Xiangdong4. Effect of trace boron on phase transformation of S355-J1 low carbon steel[J]. HTM, doi: 10.13251/j.issn.0254-6051.2015.09.021.

[1]	Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui. Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel [J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
[2]	Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng. Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing [J]. Heat Treatment of Metals, 2022, 47(4): 245-250.
[3]	Wang Yinghu, Zheng Huaibei, Bai Qingqing, Song Lingxi, Yao Bin, Wang Liwei. Phase transformation and precipitation behavior of Cr-Mn-Ni-N high nitrogen steel for non-magnetic drilling collar during equilibrium solidification [J]. Heat Treatment of Metals, 2022, 47(3): 173-180.
[4]	Zhang Nan, Li Yan, Ding Wei. Microstructure and mechanical properties of 0.2C-5Mn-0.5Si-2.5Al medium manganese steel after intercritical annealing [J]. Heat Treatment of Metals, 2021, 46(7): 37-42.
[5]	Su Xuehu. Boron-carburizing process of 1Cr13 stainless steel and its properties [J]. Heat Treatment of Metals, 2021, 46(6): 120-125.
[6]	Lü Guanchen, Liang Wenlei, Suo Yusong, Li Lei. CoSn₂→CoSn₄ phase transformation of Sn-Co alloy during heat treatment [J]. Heat Treatment of Metals, 2021, 46(4): 16-19.
[7]	Su Xing, Lü Xudong. Thermal deformation behavior of as-cast and as-forged GH4738 alloy [J]. Heat Treatment of Metals, 2021, 46(12): 46-52.
[8]	Lu Yanna, Long Jiahui, Jiang Yanbin, Liu Xinhua. Research progress on high-energy electropulsing treatment of high-performance metallic materials [J]. Heat Treatment of Metals, 2021, 46(10): 1-11.
[9]	Zhang Jian, Huang Daosi, Zhao Longzhi, Jiao Haitao, Tang Yanchuan, Liu Dejia, Zhao Mingjuan, Li Jin. Effect of rare earth Ce on properties of high-boron bainite coating prepared by laser cladding [J]. Heat Treatment of Metals, 2021, 46(1): 133-137.
[10]	Liang Yao, Yu Xiaohua, Chong Xiaoyu, Yuan Zhentao. Effect of quenching temperature on microstructure and mechanical properties of high-boron Fe-based alloy for roll [J]. Heat Treatment of Metals, 2020, 45(8): 86-90.
[11]	Wang Kai, Wu Zhifang, Wu Run, Li Mingwei. Effect of I&Q&P process on microstructure and properties of high-boron iron-based wear-resistant alloy [J]. Heat Treatment of Metals, 2020, 45(7): 1-6.
[12]	Cai Shoulu, Xie Fei, Pan Jianwei, Zou Weidong. Optimization of alternating current field enhanced pack boron-aluminizing boriding-based [J]. Heat Treatment of Metals, 2020, 45(7): 194-197.
[13]	Zhu Pengcheng, Jiang Lijun, Xiang Kangning, Huang Jie, Yao Dan, Yu Xinxiang. Elimination of Al₂CuMg phase during homogenization in Al-8.0Zn-2.0Mg-2.1Cu alloy [J]. Heat Treatment of Metals, 2020, 45(5): 40-44.
[14]	Li Mingwei, Wu Run, Wang Kai, Zeng Songsheng. Effect of Q&P process on microstructure and properties of Fe-0.45C-1.6B high-boron steel [J]. Heat Treatment of Metals, 2020, 45(5): 84-89.
[15]	Zhang Qun, Wang Deyong, Kan Kai. Effect of continuous cooling rate on phase transformation and microstructure of 15B36-M track steel for excavator [J]. Heat Treatment of Metals, 2020, 45(5): 115-118.

Effect of trace boron on phase transformation of S355-J1 low carbon steel

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments