| [1] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Simulation of heating process for martensitic heat resistant steel G115 heavy pipe blanks
[J]. Heat Treatment of Metals, 2022, 47(4): 208-212.
|
| [2] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Finite element analysis of novel martensitic heat-resistant steel G115 heavy castings
[J]. Heat Treatment of Metals, 2022, 47(2): 229-235.
|
| [3] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [4] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [5] |
Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili.
Finite element simulation of quenching process of large aluminum alloy forgings
[J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
|
| [6] |
Li Junheng, Wu Yunxin, Gong Hai.
Effect of bulging on quenching residual stress of 2219 aluminum alloy ring
[J]. Heat Treatment of Metals, 2021, 46(7): 114-119.
|
| [7] |
Cui Lujun, Hao Chaojie, Guo Shirui, Zheng Bo, Cao Yanlong, Zeng Wenhan.
Theoretical analysis and experimental research on laser cladding trajectory for slender shaft
[J]. Heat Treatment of Metals, 2021, 46(7): 201-206.
|
| [8] |
Wang Tong, Lu Wenlin, Li Qing, Du Chunhui, Chen Xuyang, Xue Danruo.
Numerical simulation and analysis of vacuum heating temperature field of hydrogen treatment furnace
[J]. Heat Treatment of Metals, 2021, 46(2): 209-212.
|
| [9] |
Qu Zhe, Zhu Xiaoshuo, Xing Ruofei, Fu Yudong.
Design and fluid-thermal coupling of a strong quenching tank with double vortex flow field
[J]. Heat Treatment of Metals, 2021, 46(11): 262-269.
|
| [10] |
Liu Huaying, Peng Xinyuan, Tang Longshu, Li Chao.
Finite element simulation of temperature field for AP1000 main pipeline during quenching under different flow rates
[J]. Heat Treatment of Metals, 2020, 45(8): 147-151.
|
| [11] |
Zhang Hongzhi, Yang Pan, Guo Dongxu, Wu Yu, Zhao Yong, Qiang Rui, Tan Xiaolian.
Numerical simulation of temperature field in vacuum annealing treatment of Zr-4 alloy sheet
[J]. Heat Treatment of Metals, 2020, 45(7): 238-242.
|
| [12] |
Dong Chengzhi, Liang Xiao, Li Xianjun, Yang Tao, Hou Junqing, Luo Ping.
Numerical simulation and experimental verification of air-jet cooling control structure for steel sheet
[J]. Heat Treatment of Metals, 2020, 45(6): 239-243.
|
| [13] |
Wang Chao, Zhang Hai, Li Dongfei, Yun Hao, Xu Wensu, Zhao Wu.
Effect of microparticle shot peening on residual stress field of target
[J]. Heat Treatment of Metals, 2020, 45(5): 192-198.
|
| [14] |
Liu Xiaodong, Jiang Honglei, Xie Meng.
Analysis on residual stress of Q345 steel in laser cladding process
[J]. HTM, 2020, 45(3): 226-230.
|
| [15] |
Xu Dacheng, Bo Hengyong, Zheng Shanjü, Li Mengnie.
Numerical simulation and experimental verification of Jominy test for SA508-3 steel
[J]. Heat Treatment of Metals, 2020, 45(12): 231-237.
|
