| [1] |
Wang Guodi, Jing Ran, Zhang Manxue, Feng Tian, Yu Guoqing, Xie Niansuo.
Effects of cold rolling deformation and recrystallization on microstructure and properties of TC4 alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 48-52.
|
| [2] |
Zhang Huiyun, Meng Xianming, Zheng Liuwei, Liang Wei.
Effect of sensitization on hydrogen embrittlement sensitivity of 304 austenitic stainless steel in different states
[J]. Heat Treatment of Metals, 2021, 46(8): 164-169.
|
| [3] |
Wang Zhao, Liu Jingbao, Du Mingshan, Sun Xu, Yang Lina, Li Mengxing, Yang Mingwei.
Effect of cold rolling reduction ratio on microstructure and properties of 1180 MPa grade complex phase steel
[J]. Heat Treatment of Metals, 2021, 46(6): 79-81.
|
| [4] |
Jin Yajun, Wang Chuang, Dou Xiaoyao, Huang Aijun, Huang Yongheng.
Cause analysis and prevention of edge cracks in cold-rolled 65Mn wide steel strip
[J]. Heat Treatment of Metals, 2021, 46(5): 262-266.
|
| [5] |
Tian Shuoshi, Ma Fengcang, Liu Ping, Liu Xinkuan, Li Wei, Zhang Ke.
Evolution of microstructure and properties of 1RK91 stainless steel during cold rolling and aging
[J]. Heat Treatment of Metals, 2021, 46(12): 229-235.
|
| [6] |
Yuan Aoming, Li Jingkun, Gao Xiaodan, Ren Xueping.
Effect of cold rolling and aging process on σ phase precipitation of 2205 duplex stainless steel
[J]. Heat Treatment of Metals, 2021, 46(10): 26-30.
|
| [7] |
Li Min, Li Yun, Xu Yuguo, Wang Diangang.
Effect of solution treatment on microstructure and properties of cold rolling7B04 aluminum alloy sheet
[J]. Heat Treatment of Metals, 2020, 45(9): 105-110.
|
| [8] |
Leng Ke, Feng Xiaoxue, Yan Feng, Fu Yudong.
Effect of cold rolling pretreatment on microstructure of TC4 alloy nitrided at 540 ℃
[J]. Heat Treatment of Metals, 2020, 45(8): 199-202.
|
| [9] |
Meng Ranran, Duan Yanghui, Feng Yunli, Li Jie.
Effect of Nb on cold rolled microstructure and texture of grain-oriented silicon steel
[J]. Heat Treatment of Metals, 2020, 45(6): 178-184.
|
| [10] |
Chen Wei, Wang Yong, Han Jian.
Cause analysis on spalling of working roll during cold rolling
[J]. Heat Treatment of Metals, 2020, 45(6): 232-235.
|
| [11] |
Si Songhua, Zhou Fangying, Wang Jianguo.
Effects of cold rolling and heat treatment on microstructure and properties of Al0.3CoCrFeNi high entropy alloy
[J]. HTM, 2020, 45(3): 103-107.
|
| [12] |
Yang Zhengbin, Li Yan, Huang Zhehui, Wang Hongkun, Xiang Jisheng, Zhao Hongjin.
Effect of cold rolling deformation on texture of Al-Mg-Si aluminum alloy
[J]. HTM, 2020, 45(3): 122-127.
|
| [13] |
Zeng Songwen, Liu Lu, Liu Yujian, Qian Dongsheng, Wang Feng.
Effect of cold rolling on microstructure evolution and wear resistance of G20CrNi2MoA carburized bearing steel
[J]. Heat Treatment of Metals, 2020, 45(12): 53-59.
|
| [14] |
Li Hang, Li Jie, Chu Yanpeng, Jia Zhixuan, Feng Yunli.
Effect of cold rolling and annealing on microstructure and mechanical properties of FeMnCoCrAl high entropy alloy
[J]. Heat Treatment of Metals, 2020, 45(11): 105-114.
|
| [15] |
He Yuangeng, Liu Yujian, Xia Yunzhi, Qian Dongsheng, Wang Feng.
Effect of cold rolling on M/B duplex microstructure and mechanical properties of M50 steel
[J]. Heat Treatment of Metals, 2020, 45(11): 126-131.
|
