| [1] |
Gao Yongwang, Kong Xiangling, Li Pengming, Liu Yue.
Effect of discharge temperature during annealing at 750 ℃ on microstructure and properties of QT450-10 nodular cast iron
[J]. Heat Treatment of Metals, 2022, 47(1): 261-265.
|
| [2] |
Wang Quan1，Wu Pengxiang1, 2，Sun Tingting1 .
Effect of tempering technology on microstructure and mechanical properties of ultra-low carbon alloy steel
[J]. HTM, 2017, 42(4): 91-94.
|
| [3] |
Fan Xinchao，Wang Chunxu, Li Yong, Huang Shunzhe, Han Shun, Liu Xianmin.
Effect of tempering temperature on microstructure and mechanical properties of ultra-high-strength 35Cr3Ni2SiMnMoVA steel
[J]. HTM, 2017, 42(4): 95-98.
|
| [4] |
Wu Teng，Wu Run，Xiong Weiliang，Song Shupeng.
Effect of finishing rolling temperature on microstructure and mechanical properties of C-Mn hot-rolled dual phase steel
[J]. HTM, 2017, 42(4): 124-127.
|
| [5] |
An Baifeng1, Gao Guhui1, Gui Xiaolu1, Bai Bingzhe1,2, Weng Yuqing1,2.
Effect of austenite reverse transformation and Q&P process on microstructure and mechanical properties of high strength low alloy steel
[J]. HTM, 2016, 41(9): 74-77.
|
| [6] |
Wang Hua, Zhao Qi, Yin Hongxia.
Effect of trace Ce on microstructure and mechanical properties of Al-Cu-Li alloy
[J]. HTM, 2016, 41(7): 63-65.
|
| [7] |
Zhang Zaiyu1,2,3， Liang Yilong1,2，Lei Lei1,2，Jiang Yun1,2，Yang Ming1,2.
Effect of PAG quenchant temperature on mechanical properties of 60Si2CrVAT spring steel
[J]. HTM, 2016, 41(7): 150-153.
|
| [8] |
Feng Qiuyuan1, 2, Zhang Lei2, Pang Hong2, Zhang Pinghui1, 2, Tong Xuewen1, 2, Wang Dingchun1, 2, Gao Qi1, 2.
Microstructure and properties of low cost TC4 titanium alloy sheet
[J]. HTM, 2016, 41(6): 85-88.
|
| [9] |
Sun Manli1,2,Jiang Bo1,2,Chen Gang1,2, Yang Lizhu1,2，Zhong Bin1,2.
Effect of Nb micro alloying on microstructure and mechanical properties of high carbon steel
[J]. HTM, 2016, 41(4): 71-74.
|
| [10] |
Meng Xiangshun, Gao Quande, Ye Yujuan, Wang Xuexi, Wang Dengke, Li Haibin, Shi Jianma.
High strength and toughness process of 20Cr2Ni4A steel
[J]. HTM, 2016, 41(4): 175-177.
|
| [11] |
Di Wei1, Qiao Jiaying1, Li Yongbing1, Guo Yanwei2, Zhou Yongsong1, Zhang Jishan2.
Effects of solution and aging treatment on microstructure and properties of TB3 titanium alloy cold heading fastener
[J]. HTM, 2016, 41(2): 123-126.
|
| [12] |
Huang Zhengyang, Guo Zijing, Wen Guangping, Li Qing.
Mechanical properties of TC4 alloy after different annealing process
[J]. HTM, 2015, 40(9): 175-179.
|
| [13] |
Lei Lei1, 2, Liang Yilong1, 2, Yi Yanliang1, 2, Long Shaolei1, 2.
Effects of cooling rate on microstructure and mechanical properties of 20CrNi2Mo steel
[J]. HTM, 2015, 40(8): 129-132.
|
| [14] |
Wu Kai, Yao Wei, Fan Xiaolong, You Fenghai, Wang Zhimin.
Effect of heat treatment on microstructure and properties of argon arc-welded BTi-6431S alloy
[J]. HTM, 2015, 40(7): 8-13.
|
| [15] |
Zhao Yongtao1,2，Zhang Shaohui2，Dong Junhui1，Liu Zongchang2.
Effect of post welding heat treatment on microstructure and mechanical properties of P92 welded joints
[J]. HTM, 2015, 40(7): 33-36.
|
