| [1] |
Yang Wenhao, Bao Mingdong, Tang Bin, Wang Yupeng, Zhao Guohua, Wang Shuaikang, Wang Duo.
Influence of surface roughness on surface morphology and sputtering performance of magnetron sputtering etched area of pure Cu target
[J]. Heat Treatment of Metals, 2021, 46(8): 230-235.
|
| [2] |
Zhao Nan, Liu Xuewei, Sun Mingjun, Xue Jun.
Microstructure and fatigue properties of low temperature coiling hot-rolled dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(5): 55-59.
|
| [3] |
Pan Hongji, Luo Defu, Chen Shengyi.
Effect of nitride carbonize and oxidize multi-treatment (QPQ) on microstructure and properties of MPS700A steel
[J]. Heat Treatment of Metals, 2021, 46(4): 83-87.
|
| [4] |
Fu Yujing, Liu Hongliang, Fu Donghe, Chen Yu, Ma Feng.
Effect of H2 content in cooling stage on properties and surface quality of 800 MPa grade hot dip galvanized dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(2): 232-236.
|
| [5] |
Yang Peiyuan, Huo Qinghui, Chen Zhuo, Zhou Wei, Wang Hongbin.
Effect of dew point on surface oxidation behavior of DP590 dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(11): 97-102.
|
| [6] |
Shen Zhi, Yan Jianwu, Jin Kang, Zhou Yingli, Yin Jian.
Influence of fabrication technology on surface morphology of giant magnetostrictive Fe-Ga alloy film
[J]. Heat Treatment of Metals, 2021, 46(11): 236-240.
|
| [7] |
Li Huiyuan, Dai Jietao, Xian Lingbiao, Ren Jianping, Li Liejun.
Effect of annealing process on microstructure and properties of dual phase steel DP590GA
[J]. Heat Treatment of Metals, 2021, 46(1): 50-54.
|
| [8] |
Wang Xingfu, Li Yonggang, Lei Da, Shi Youjie, Li Xuenan.
Effect of cryogenic treatment on surface properties of K6509 Co-based alloy
[J]. Heat Treatment of Metals, 2020, 45(7): 28-31.
|
| [9] |
Li Jianxin, Luo Zhiqiang, Cheng Shichao, Yang Maosheng, Sun Yong, Pang Xuedong.
Fatigue performance and crack initiation of 16Cr3NiWMoVNbE gear steel
[J]. Heat Treatment of Metals, 2020, 45(7): 167-172.
|
| [10] |
Liu Jingbao, Zhang Hongbo, Geng Zhiyu, Wei Huanjun.
Microstructure and properties of continuous annealed DP980 high strength steel
[J]. HTM, 2020, 45(2): 42-45.
|
| [11] |
Qi Chunyu 1, 2, Li Yuanpeng3, Wang Hehe 3, Jiang Sheming 3, Zhang Qifu 3 .
Influence of dew point on oxide morphology and coating interfacial structure of a DP steel
[J]. HTM, 2017, 42(4): 32-36.
|
| [12] |
Wu Teng，Wu Run，Xiong Weiliang，Song Shupeng.
Effect of finishing rolling temperature on microstructure and mechanical properties of C-Mn hot-rolled dual phase steel
[J]. HTM, 2017, 42(4): 124-127.
|
| [13] |
Zeng Xiaoan1, Qiu Changjun1, Zhang Wen1, Wang Haoran1, Wang Xiaojing2, Liu Yanhong2, Li Huailin2.
Influence of duty cycle on surface morphology of pure Cr coatings deposited by multi-arc ion plating
[J]. HTM, 2017, 42(4): 172-174.
|
| [14] |
Kuang Chunfu, Zheng Zhiwang, Wang Meng.
Effect of soaking temperature on microstructure and properties of 590 MPa hot-dip galvanized dual phase steel
[J]. HTM, 2016, 41(5): 133-136.
|
| [15] |
Zhang Jianqiang1, 2, Chen Changfeng1, Zheng Yanjun1, Li Yan2, Wang Yongwei2, Miao Chengliang2, Huang Xueqi2.
Analysis on surface black spots defects of thick gauge galvanized sheet
[J]. HTM, 2016, 41(4): 205-207.
|
