| [1] |
Qi Xiaoliang, Li Yan, Ding Wei, Zhao Zengwu.
Effect of original microstructure of medium manganese TRIP steel containing Al on microstructure and mechanical properties after intercritical annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 24-29.
|
| [2] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [3] |
Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo.
Effects of Si content and quenching temperature on microstructure and properties of Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(3): 130-135.
|
| [4] |
Liu Tao, Wu Hongyan, Gao Xiuhua, Qin Dongyang, Du Linxiu.
Effect of intercritical tempering temperature on microstructure and mechanical properties of Fe-4Mn-1.2Cr-0.3Cu-0.6Ni medium manganese steel
[J]. Heat Treatment of Metals, 2022, 47(2): 91-98.
|
| [5] |
Dong Rui, Chen Lin, Cen Yaodong, Bao Xirong.
Microstructure and fatigue crack growth of a bainitic steel under different heat treatments
[J]. Heat Treatment of Metals, 2022, 47(2): 153-158.
|
| [6] |
Hou Yaqing, Zhang Yu, Yu Mingguang, Wang Jingjing, Yang Li, Su Hang.
Thermodynamic calculation of retained austenite content in Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(1): 25-31.
|
| [7] |
Gao Yaping, Shi Zhongran, Jia Juan, Luo Xiaobing, Song Xinli.
Effect of heat treatment process on microstructure and abrasive wear properties of dredging engineering ship steel
[J]. Heat Treatment of Metals, 2022, 47(1): 32-37.
|
| [8] |
Qiu Xuyangfan, Yang Zhuoyue, Ding Yali.
Solid solution treatment for improving cryogenic temperature toughness of Cr-Ni-Mo-Ti maraging stainless steel
[J]. Heat Treatment of Metals, 2022, 47(1): 44-48.
|
| [9] |
Deng Biao, Chen Peng, Wang Guodong.
Effect of tempering temperature on microstructure and properties of secondary hardening martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(9): 65-71.
|
| [10] |
Zhao Shaofu, Xu Hongxiang, Wang Hongwei, Guo Jingqiang, Li Ziyan, Chen Yan.
Experimental study on improving carburizing and quenching hardness of gear made of 20Cr2Ni4A steel
[J]. Heat Treatment of Metals, 2021, 46(7): 120-125.
|
| [11] |
Wang Lingqi, He Yanlin, Pan Le.
Effect of tempering temperature on microstructure and mechanical properties of high nitrogen stainless bearing steel
[J]. Heat Treatment of Metals, 2021, 46(6): 8-13.
|
| [12] |
Li Xiong, Lin Faju, Du Simin, Wu Chengchuan.
Comparative analysis of high performance bearing steels
[J]. Heat Treatment of Metals, 2021, 46(6): 14-20.
|
| [13] |
An Min, Fu Zhongyuan, Yuan Chao, Xia Yunzhi.
Effects of post-quenching cleaning and cold treatment process on retained austenite content of 9Cr18 steel bearing ring
[J]. Heat Treatment of Metals, 2021, 46(6): 21-23.
|
| [14] |
Qiu Xuyangfan, Yang Zhuoyue, Ding Yali.
Effect of retained/reversed austenite on improving -196 ℃ cryogenic impact property of high strength stainless steel
[J]. Heat Treatment of Metals, 2021, 46(5): 71-74.
|
| [15] |
Liang Jingyu, Shi Zengmin, Xie Hao, Deng Lichengui, Li Guangyu, Dai Lei.
Alloying mode and microstructure control of ultra-high strength steels for automobile
[J]. Heat Treatment of Metals, 2021, 46(4): 20-25.
|
