Tribological performance of plasma aluminized layer on Ti2AlNb alloy

doi:10.13251/j.issn.0254-6051.2015.11.014

HTM

Previous Articles Next Articles

Tribological performance of plasma aluminized layer on Ti₂AlNb alloy

College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics

Online:2015-11-25 Published:2015-11-30

Abstract

CLC Number:

TG174.445

Ren Beilei，Liang Wenping，Miao Qiang，Pan Xiaoyang，Liu Wen. Tribological performance of plasma aluminized layer on Ti₂AlNb alloy[J]. HTM, doi: 10.13251/j.issn.0254-6051.2015.11.014.

[1]	Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng. Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing [J]. Heat Treatment of Metals, 2022, 47(4): 245-250.
[2]	Luo Jiandong, Hu Yanhong, Lin Yuzhou. Application of low temperature nitriding process with double power supplies on 316 stainless steel [J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
[3]	Shi Haifang, Li Qiang. Effect of carbon content on microstructure and properties of Al_0.5Co_0.5NiCrFe high-entropy alloy coating [J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
[4]	Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang. Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel [J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
[5]	Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin. Research progress of laser modification technology for titanium alloy surface [J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
[6]	Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li. Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel [J]. Heat Treatment of Metals, 2022, 47(2): 178-182.
[7]	Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding [J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
[8]	Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng. Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface [J]. Heat Treatment of Metals, 2022, 47(1): 185-191.
[9]	Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi. Preparation technology of laser clad Fe-based coating for shield sealing runway repair [J]. Heat Treatment of Metals, 2022, 47(1): 202-211.
[10]	Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun. Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer [J]. Heat Treatment of Metals, 2022, 47(1): 276-280.
[11]	Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li. Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(9): 223-228.
[12]	Gong Yuling, Wu Meiping, Cui Chen, Miao Xiaojin. Effect of overlap rate on microstructure and properties of Ni60A clad coating on TC4 titanium alloy [J]. Heat Treatment of Metals, 2021, 46(9): 229-233.
[13]	Miao Xiaojin, Xia Sihai,Wu Meiping, Yu Jinghu, Zhao Zishuo, Cui Chen, Zhang Chunlei. Effect of adding CeO₂ on properties of Al-Ti laser clad coating on aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 234-240.
[14]	Lin Zhiqing, Zhang Fucheng, Ma Hua, Wang Lin, Chen Chen, Xu Ming. Effect of FW&TMCP treatment on wear resistance of as-cast high manganese steel frog [J]. Heat Treatment of Metals, 2021, 46(8): 92-98.
[15]	Lan Dongsheng, Yan Xianguo, Chen Zhi, Jiang Yijiang, Yuan Ruize, Yao Yongchao, Su Hang. Effect of magnetic field cryogenic treatment on wear resistance of YG11C cemented carbide [J]. Heat Treatment of Metals, 2021, 46(8): 184-188.

Tribological performance of plasma aluminized layer on Ti₂AlNb alloy

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments