| [1] |
Chen Baoan, Zhang Jingyuan, Zhu Zhixiang, Han Yu, Pan Xuedong, Zhang Lei, Chen Suhong.
Effect of chemical composition on microstructure and properties of high strength Al-Mg-Si alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 30-38.
|
| [2] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [3] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [4] |
Sun Kai, Chen Yan, Yang Shaobin.
Effect of aging temperature on microstructure and hardness of laser selective melting TC21 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 155-158.
|
| [5] |
Zhang Jun, Zhao Sixin.
Spheroidizing annealing process of 16MnCrS5 steel for cold forging gear
[J]. Heat Treatment of Metals, 2022, 47(4): 185-188.
|
| [6] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [7] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
| [8] |
Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun.
Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
|
| [9] |
Sun Jian, Huang Zhenyi, Li Jinghui, Wang Ping.
Effect of solution treatment and aging on microstructure and hardness of Fe-Mn-Al-C light weight steel
[J]. Heat Treatment of Metals, 2022, 47(3): 34-38.
|
| [10] |
Yang Chunmiao, Wang Shan, Wang Shuhui, Li Yanzhen, Liu Wenwen.
Influence of pre-aging time on microstructure and properties of 7A85 aluminum alloy during RRA process
[J]. Heat Treatment of Metals, 2022, 47(3): 44-47.
|
| [11] |
Feng Rui, Li Lilian, Tie Jinfang, Hou Jiaqiang, Mi Yiyuan.
Effect of high temperature thermomechanical treatment on microstructure and properties of 20CrMnTiH steel forgings
[J]. Heat Treatment of Metals, 2022, 47(3): 72-76.
|
| [12] |
Sun Guojin, Gao Zhiwen, Cui Xiaoyan, Gao Kekun, Sun Li.
Effect of dual liquid quenching on microstructure and hardness of 9Cr2Mo steel roller
[J]. Heat Treatment of Metals, 2022, 47(3): 88-91.
|
| [13] |
Cheng Tijuan, Gan Bin, Yu Hongyao, Zhou Haijing, Guo Caiyu, Bi Zhongnan, Du Jinhui.
Effect of solution treatment on structure and properties of a novel nickel-based superalloy
[J]. Heat Treatment of Metals, 2022, 47(3): 107-112.
|
| [14] |
Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang.
Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel
[J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
|
| [15] |
Zhou Zhongping, Zhang Xiaojuan, Bai Lu, Yu Fangyin, Min Yong'an.
Microstructure and properties of T250 steel after plasma nitriding
[J]. Heat Treatment of Metals, 2022, 47(3): 210-214.
|
