| [1] |
Chen Dongjun, Li Guangyang, Liu Gang.
Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
|
| [2] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [3] |
Li Tianfu, Qu Shen, Dong Chen, Zhang Zhefeng.
Failure analysis on spindle bearing of numerical control machine tool
[J]. Heat Treatment of Metals, 2022, 47(4): 258-262.
|
| [4] |
Zhang Ning, Gao Xing, Wang Zhilin, Jiang Bo, Liu Yazheng.
Analysis of abnormal microstructure and properties of 18CrNiMo7-6 steel gear
[J]. Heat Treatment of Metals, 2022, 47(4): 268-273.
|
| [5] |
Lu Jinsheng, Zhang Heng, Xu Hongxiang, Guo Shirui.
Ion nitriding technology of inner gear ring of 6.5 MW nuclear power pump
[J]. Heat Treatment of Metals, 2022, 47(3): 97-101.
|
| [6] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [7] |
Zhao Yiqi, Nie Xiaolong, Zhao Sixin, Gao Jiaqiang, Liu Xinkuan.
Predicting model of gear steel hardenability based on extreme learning machine
[J]. Heat Treatment of Metals, 2022, 47(3): 227-233.
|
| [8] |
Li Mingxiang, Yang Ping, He Wei, Zhang Meng, Wang Wenbo.
Failure analysis of hydrogen induced delayed fracture of 50CrVA steel spring
[J]. Heat Treatment of Metals, 2022, 47(3): 257-260.
|
| [9] |
Yang Yuchuan, Li Wei, Xiong Yong.
Analysis of fracture cause of 1Cr17Ni2 steel small shaft of control box
[J]. Heat Treatment of Metals, 2022, 47(3): 261-265.
|
| [10] |
Hu Fangzhong, Yang Shaopeng, Jin Guozhong, Hu Naiyue, Wang Kaizhong, Yang Zhiqiang, Chen Shijie.
Effect of quenching temperature on microstructure evolution and mechanical properties of Nb microalloyed gear steel 18CrNiMo7-6
[J]. Heat Treatment of Metals, 2022, 47(2): 105-111.
|
| [11] |
Zang Yan, Wang Jianjun.
Simulation of end quenching process and prediction of hardenability of Cr-Ni-Mo gear steel
[J]. Heat Treatment of Metals, 2022, 47(2): 257-261.
|
| [12] |
Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia.
Failure analysis of 20 steel equal-diameter tee
[J]. Heat Treatment of Metals, 2022, 47(2): 262-266.
|
| [13] |
Dai Yanzhang, Han Shun, Li Yong, Zhou Min, Wang Chunxu.
Effect of tempering temperature on microstructure and properties of a new generation transmission gear steel C61
[J]. Heat Treatment of Metals, 2022, 47(1): 49-55.
|
| [14] |
Zhao Xiaojun, Liang Xiao, Cai Zhenyang, Xiao Lairong.
Effect of aluminizing and oxidation treatment on microstructure and mechanical properties of CLAM steel
[J]. Heat Treatment of Metals, 2022, 47(1): 192-196.
|
| [15] |
Wu Hao, Deng Xiangtao, Li Chengru, Sui Yi, Zhang Tao, Ji Wenbo, Wang Zhaodong.
Analysis on cold bending fracture of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(9): 262-267.
|
