| [1] |
Pang Qinghai, Lang Qingbin, He Chunjing, Wang Jiuhua, Yuan Yasha.
Phase transformation and mechanical properties of 5Cr2NiMoVSi die steel
[J]. Heat Treatment of Metals, 2022, 47(3): 186-190.
|
| [2] |
Tao Sufen, Wu Hao, Sun Guilin, Chen Long, Chen Bo.
Effect of Ni content on continuous cooling transformation curves of EQ70 steel for marine engineering
[J]. Heat Treatment of Metals, 2022, 47(1): 100-105.
|
| [3] |
Wang Dongmei, Zhao Leicheng, Chen Lin, Dong Rui.
Continuous cooling transformation behavior of hypereutectoid rail steel
[J]. Heat Treatment of Metals, 2021, 46(2): 45-49.
|
| [4] |
Zhao Nan, Xue Feng, Pan Jin, Guo Weichao, Li Jianchao.
Effect of cooling rate on undercooling austenite transformation of 700 MPa automotive beam steel
[J]. Heat Treatment of Metals, 2021, 46(2): 178-181.
|
| [5] |
Geng Wubin, Cui Qingling, Liang Jiawei, Zhu Zongwei, Zhang Longchao.
Law of continuous cooling transformation and isothermal transformation of titanium-free hot stamping steel
[J]. Heat Treatment of Metals, 2021, 46(12): 149-155.
|
| [6] |
Zhou Yun, Zhang Yu, Chen Gang.
Continuous cooling transformation and hot rolling process of C-Si-Mn welding wire steel
[J]. HTM, 2019, 44(1): 35-39.
|
| [7] |
Liu Yanli1, An Zhiguo1, Huang Yanxin2.
Effects of cooling rate on phase transformation of austenite in 55SiMnMo drill steel
[J]. HTM, 2017, 42(2): 131-134.
|
| [8] |
Wang Lijun, Li Baoxiu, Chen Jilin, Zhai Jinpo, Feng Zhongxian, Wang Ningtao.
Continuous cooling transformation behavior of undercooled austenite of 30CrMnTi steel
[J]. HTM, 2016, 41(8): 41-44.
|
| [9] |
Han Peng1,Dong Yi2, Li Weijuan1, Shi Xiaoguang2, Liu Rendong2, Yang Zhen1, Ma Pengyu1, Feng Hao1.
Research and development of ultra-high strength and hot-rolled steel with high hole expansion ratio
[J]. HTM, 2016, 41(6): 12-15.
|
| [10] |
Peng Hongbing1, Chen Weiqing1, Chen Lie2, Guo Dong2, Wang Hailong2.
Effects of B on continuous cooling transformation and hardenability of 20CrMnTi steel with Sn
[J]. HTM, 2015, 40(9): 98-101.
|
| [11] |
Zhang Xianzhong1, Chen Qingfeng1, Zhou Guifeng1, Xiong Yuzhang 1, Cai Qizhou2.
Austenitic continuous cooling transformation of V-N microalloyed forging steel used for automobile connecting rods made by splitting method
[J]. HTM, 2015, 40(8): 45-48.
|
| [12] |
Tan Huijie1,2, Wang Haiyan1, 2, Ren Huiping1, Liu Zongchang1.
Phase transition and microstructure of X80 pipeline steel after continuous cooling
[J]. HTM, 2015, 40(7): 91-94.
|
| [13] |
Yu Qiaomu1,2, Wang Fuming1,2, Li Maowang3, Tang Zhenglei2,4, Lü Kun1,5.
Static continuous cooling transformation of S500Q hydroelectric steel
[J]. HTM, 2015, 40(6): 7-10.
|
| [14] |
Wang Qingxin1,2, Wang Fuming1,2, Zhang Jing1,2, Zhao Qian1,2, Huang Chuangen1,2.
Dynamic continuous cooling transformation curves of V-N microalloying 600 MPa high strength rebars steel
[J]. HTM, 2015, 40(6): 34-37.
|
| [15] |
Wang Na, Zhang Yu, Li Xiaobao, He Yuchun.
Effects of Mn and Mo on continuous cooling transformation behavior and strength of weathering steel
[J]. HTM, 2015, 40(3): 6-10.
|
