WxC reinforced Ni-based composite coating in-situ synthesis by laser cladding

doi:10.13251/j.issn.0254-6051.2016.02.019

HTM

Previous Articles Next Articles

WxC reinforced Ni-based composite coating in-situ synthesis by laser cladding

School of Materials and Energy, Guangdong University of Technology

Online:2016-02-25 Published:2016-03-10

Abstract

CLC Number:

Zhang Yanmei, Shuai Geguo, Huang Jiehuang, Liu Jing. WxC reinforced Ni-based composite coating in-situ synthesis by laser cladding[J]. HTM, doi: 10.13251/j.issn.0254-6051.2016.02.019.

[1]	Zhao Zishuo, Wu Meiping, Miao Xiaojin, Cui Chen, Gong Yuling. Effect of laser power on microstructure and corrosion resistance of FeCoNiCrMo high-entropy alloy/graphene oxide composite coating [J]. Heat Treatment of Metals, 2022, 47(4): 251-257.
[2]	Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin. Research progress of laser modification technology for titanium alloy surface [J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
[3]	Ding Tao, Zhang Yunhua, Li Junjie, Liu Jin, Liu Yan. Research status and prospect of laser cladding technology on stainless steel surface [J]. Heat Treatment of Metals, 2022, 47(2): 205-212.
[4]	Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi. Preparation technology of laser clad Fe-based coating for shield sealing runway repair [J]. Heat Treatment of Metals, 2022, 47(1): 202-211.
[5]	Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li. Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(9): 223-228.
[6]	Gong Yuling, Wu Meiping, Cui Chen, Miao Xiaojin. Effect of overlap rate on microstructure and properties of Ni60A clad coating on TC4 titanium alloy [J]. Heat Treatment of Metals, 2021, 46(9): 229-233.
[7]	Miao Xiaojin, Xia Sihai,Wu Meiping, Yu Jinghu, Zhao Zishuo, Cui Chen, Zhang Chunlei. Effect of adding CeO₂ on properties of Al-Ti laser clad coating on aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 234-240.
[8]	Zhou Jianbo, Zhang Jing, Zhang Leitao, Li Haitao, Fan Shuaiqi, Xu Jinfu. Effect of laser process parameters on crack rate and microstructure of Ni60/WC clad coating [J]. Heat Treatment of Metals, 2021, 46(9): 252-257.
[9]	Ma Zhizhen, Zhu Jiahao, Zhang Hui. Effect of Si on microstructure and high temperature oxidation resistance of high-entropy alloy coatings [J]. Heat Treatment of Metals, 2021, 46(8): 46-50.
[10]	Gong Yuling, Wu Meiping, Cui Chen, Li Yang. Effect of laser power on microstructure and corrosion resistance of Ni60A/CeO₂ clad layer on TC4 alloy [J]. Heat Treatment of Metals, 2021, 46(8): 236-240.
[11]	Cui Lujun, Hao Chaojie, Guo Shirui, Zheng Bo, Cao Yanlong, Zeng Wenhan. Theoretical analysis and experimental research on laser cladding trajectory for slender shaft [J]. Heat Treatment of Metals, 2021, 46(7): 201-206.
[12]	Chen Zixin, Zhou Houming, Xu Caixing, Da Limei, Zhu Yuxu, He Fangjia, Wang Zeda. Laser cladding remanufacturing process of aircraft landing gear based on 30CrMnSiNi2A steel [J]. Heat Treatment of Metals, 2021, 46(6): 45-52.
[13]	Zhang Yi, Gu Zhen, Gao Shuailong, Xi Shengqi. Microstructure and properties of laser clad Al_xNbMn₂FeMoTi_0.5 high-entropy alloy composite coatings [J]. Heat Treatment of Metals, 2021, 46(6): 146-152.
[14]	He Binfeng. Microstructure and properties of laser clad Ni-based self-lubricating coating on Ti6Al4V alloy [J]. Heat Treatment of Metals, 2021, 46(6): 195-199.
[15]	Xia Tongchuan, Liu Ting, Zhang Lin, Fang Zhao, Li Mingxi. Microstructure and wear resistance of laser clad Fe/NiCr-Cr₃C₂ composite coating [J]. Heat Treatment of Metals, 2021, 46(5): 196-201.

WxC reinforced Ni-based composite coating in-situ synthesis by laser cladding

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments