| [1] |
Chen Dongjun, Li Guangyang, Liu Gang.
Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
|
| [2] |
Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun.
Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
|
| [3] |
Yang Chunmiao, Wang Shan, Wang Shuhui, Li Yanzhen, Liu Wenwen.
Influence of pre-aging time on microstructure and properties of 7A85 aluminum alloy during RRA process
[J]. Heat Treatment of Metals, 2022, 47(3): 44-47.
|
| [4] |
Jiang Zhongtao, Wang Xin, Zhou Zhiming, Lin Haitao, Yang Xusheng, Dai Fangfang.
Effect of two-step solution process on microstructure and mechanical properties of 7050 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 102-106.
|
| [5] |
Ye Tuo, Tang Ming, Liu Jizhao, Liu Wei, Wu Yuanzhi, Liu Wei, Xu Wen.
Effect of solution temperature on microstructure and mechanical properties of 7075 aluminum alloy sheet
[J]. Heat Treatment of Metals, 2022, 47(3): 119-123.
|
| [6] |
Zhou Zhongping, Zhang Xiaojuan, Bai Lu, Yu Fangyin, Min Yong'an.
Microstructure and properties of T250 steel after plasma nitriding
[J]. Heat Treatment of Metals, 2022, 47(3): 210-214.
|
| [7] |
Ye Tuo, He Yubing, He Wenpeng, Liu Wei, Yuan Haodeng, Wu Yuanzhi, Liu Wei, Liu Jizhao.
Hot compression behavior and microstructure analysis of as-rolled 6082-T6 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 26-30.
|
| [8] |
Yu Xinlei, Zheng Xiaoping, Cao Tong, Tian Yaqiang, Chen Liansheng.
Effect of isothermal temperature on semi-solid microstructure of 7075 aluminum alloy prepared by rolling SIMA method
[J]. Heat Treatment of Metals, 2022, 47(2): 164-167.
|
| [9] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [10] |
Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei.
Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding
[J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
|
| [11] |
Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren.
Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 130-134.
|
| [12] |
Wang Jiahui, Chen Wenhao, Zhang Yu, Jiang Zhuoao, Wang Qinghang, Zhao Lingyu.
Optimization of heat treatment process of spray-formed 7055 high strength aluminum alloy and its application
[J]. Heat Treatment of Metals, 2022, 47(1): 239-244.
|
| [13] |
Li Yahong, Qi Xiaowei, Wang Xipeng, He Fang.
Cause analysis on low plasticity of annealed 2A12 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 290-294.
|
| [14] |
Huang Juan, Huang Yuanchun, Shen Zhenyu, Li Xiangyue, Zeng Yu, Yang Gengchen.
Effect of finish rolling temperature and annealing temperature on microstructure and properties of 5052 aluminum alloy sheet
[J]. Heat Treatment of Metals, 2021, 46(9): 79-84.
|
| [15] |
Li Xiao, Cheng Xiaonong, Xu Guifang, Yang Chengkang, Chen Leli.
Effect of annealing process on microstructure and mechanical properties of 3003 aluminum alloy plate
[J]. Heat Treatment of Metals, 2021, 46(9): 90-94.
|
