| [1] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [2] |
Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian.
Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature
[J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
|
| [3] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [4] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [5] |
Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong.
Effect of laser shocking on surface integrity of 690 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
|
| [6] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [7] |
Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili.
Finite element simulation of quenching process of large aluminum alloy forgings
[J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
|
| [8] |
Yang Wenhao, Bao Mingdong, Tang Bin, Wang Yupeng, Zhao Guohua, Wang Shuaikang, Wang Duo.
Influence of surface roughness on surface morphology and sputtering performance of magnetron sputtering etched area of pure Cu target
[J]. Heat Treatment of Metals, 2021, 46(8): 230-235.
|
| [9] |
Li Junheng, Wu Yunxin, Gong Hai.
Effect of bulging on quenching residual stress of 2219 aluminum alloy ring
[J]. Heat Treatment of Metals, 2021, 46(7): 114-119.
|
| [10] |
Zhang Yonglu, Ju Quan, Hu Man, Ma Huiping, Zhang Shixiao.
Post weld heat treatment of GH3230 alloy
[J]. Heat Treatment of Metals, 2021, 46(6): 116-119.
|
| [11] |
Wei Nasha, Yuan Ruize, Niu Xuemei, Chen Zhigang, Chen Zhi, Yan Xianguo.
Control mechanism of residual stress in 35MnB alloy steel by deep cryogenic treatment
[J]. Heat Treatment of Metals, 2021, 46(5): 104-110.
|
| [12] |
Yun Lu, Hao Xin.
Effect of annealing temperature on residual stress, structure and corrosion resistance of magnetron sputtering TiN/TiCN film
[J]. Heat Treatment of Metals, 2021, 46(5): 166-170.
|
| [13] |
Pan Hongji, Luo Defu, Chen Shengyi.
Effect of nitride carbonize and oxidize multi-treatment (QPQ) on microstructure and properties of MPS700A steel
[J]. Heat Treatment of Metals, 2021, 46(4): 83-87.
|
| [14] |
Yang Yu, Wang Yinghai, Zhang Jifu, Ma Xiaojun, Xu Lijia, Ren Junwei.
Formation cause analysis of electroplating mildew spot on 45Mn steel part surface
[J]. Heat Treatment of Metals, 2021, 46(4): 220-223.
|
| [15] |
Zhou Yongqiang.
Causean analysis on longitudinal cracking of 35CrMo steel cylinder pin
[J]. Heat Treatment of Metals, 2021, 46(4): 239-242.
|
