| [1] |
Li Rongbin, Li Ke, Jiang Chunxia, Zhang Rulin.
Preparation and thermal stability of AlCrTaTiZrV-nitride diffusion barrier layer
[J]. Heat Treatment of Metals, 2021, 46(9): 216-222.
|
| [2] |
Ji Guang, Gao Xiuhua, Long Jinhua.
Effect of microalloying element niobium on dynamic recrystallization behavior of high carbon alloy steel
[J]. Heat Treatment of Metals, 2021, 46(8): 26-29.
|
| [3] |
Hu Xiaomei, Liu Lining, Su Feng, Wang Jiaming, Chen Xiangguang, Xu Hao.
Electrical conductivity of heat-resistant Al-Fe-Cu-0.25La-Zr alloy for electric wire and cable
[J]. Heat Treatment of Metals, 2021, 46(8): 197-200.
|
| [4] |
Zhang Chaohan, Tao Pingjun, Zhu Kunsen, Huang Wenhao, Yang Yuanzheng.
Effect of Ni alloying on thermal stability and soft magnetic properties of Finemet alloy
[J]. Heat Treatment of Metals, 2021, 46(12): 119-123.
|
| [5] |
Wang Yupeng, Wu Hongjun, Bao Mingdong, Tian Wu, Zhou Bing.
Microstructure and properties of nanocrystalline Cu-Nb thin films prepared by unbalanced magnetron sputtering ion plating
[J]. Heat Treatment of Metals, 2021, 46(12): 156-161.
|
| [6] |
Li Shuang, Gao Yunfei, Wang Chen, Wang Zhen, Shi Yongliang, Wu Xiaochun.
Microstructure and properties of new hot work die steel for hot stamping
[J]. Heat Treatment of Metals, 2020, 45(9): 178-184.
|
| [7] |
Wang Chengjie, Huang Chunhua, Li Jianwen.
Lamellar structure thermal stability of inmedium-entropy eutectic CrCoNiNb0.4 alloy
[J]. Heat Treatment of Metals, 2020, 45(6): 149-152.
|
| [8] |
Wang Shaohua, Sun Yueying, Ye Xi, Xie Niansuo, Jing Ran.
Microstructure and properties of 1060 Al-based multi-layered composite reinforced with Fe-based amorphous alloy
[J]. Heat Treatment of Metals, 2020, 45(4): 75-78.
|
| [9] |
Yin Junwei, Zhou Jian, Jiang Yehua, Chi Hongxiao, Lin Peng.
Effect of carbon content on thermal fatigue properties of 4Cr5Mo2V hot work die steel
[J]. Heat Treatment of Metals, 2020, 45(11): 1-6.
|
| [10] |
Deng Chuanyin, Min Yong’an, Liao Jianxiong.
Alloy design and performance test of a Cr-Mo-V nitriding steel
[J]. HTM, 2014, 39(2): 1-6.
|
