CoCrCuFeMnNi high-entropy alloy coating prepared by plasma cladding on Q235 steel

doi:10.13251/j.issn.0254-6051.2016.04.012

HTM

Previous Articles Next Articles

CoCrCuFeMnNi high-entropy alloy coating prepared by plasma cladding on Q235 steel

1.School of Mechanical Engineering, Suzhou University of Science and Technology； 2.Department of Material and Chemical Engineering, Zhongyuan University of Technology

Online:2016-04-22 Published:2016-05-04

Abstract

CLC Number:

TG135
TG174

Lu Jinbin1, Peng Zhuqin2, Ma Mingxing2, Qi Zhendong2, Li Junkui2, He Yaxun2, Gong Zheng1. CoCrCuFeMnNi high-entropy alloy coating prepared by plasma cladding on Q235 steel[J]. HTM, doi: 10.13251/j.issn.0254-6051.2016.04.012.

[1]	Luo Zaibin, Fan Zize, Peng Zhen. Research progress of light-weight high-entropy alloys [J]. Heat Treatment of Metals, 2022, 47(4): 100-107.
[2]	Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun. Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
[3]	Zhou Zhongping, Zhang Xiaojuan, Bai Lu, Yu Fangyin, Min Yong'an. Microstructure and properties of T250 steel after plasma nitriding [J]. Heat Treatment of Metals, 2022, 47(3): 210-214.
[4]	Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu. Effect of cryogenic treatment on surface properties of TC4 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
[5]	Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding [J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
[6]	Ding Xuan, Gan Yurong, Jiang Aijuan, Li Hui, Yang Mingqiu. Influence of aging treatment on microstructure and properties of 7A55 aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 120-123.
[7]	Miao Xiaojin, Xia Sihai,Wu Meiping, Yu Jinghu, Zhao Zishuo, Cui Chen, Zhang Chunlei. Effect of adding CeO₂ on properties of Al-Ti laser clad coating on aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 234-240.
[8]	Li Haitao, Fan Shuaiqi, Zhang Leitao, Dai Jiaoyan, Xu Jinfu. Microstructure, properties and process optimization of laser nitrogen alloyed coating on 45 steel [J]. Heat Treatment of Metals, 2021, 46(8): 209-213.
[9]	Wang Zili, Chen Rongfa, Zheng Zhiwei, He Yulong, Shi Minjie, Wang Kai, Zhou Xiaojin. Microstructure and wear resistance of oxynitriding layer on piston rod surface of 42CrMo steel [J]. Heat Treatment of Metals, 2021, 46(8): 225-229.
[10]	Xu Hongyang, Meng Wenglu, Lu Jinbin, Ma Mingxing. Phase and stability analysis of CrCuFeNiTi high entropy alloy coating based on first principles [J]. Heat Treatment of Metals, 2021, 46(7): 60-64.
[11]	Chen Zixin, Zhou Houming, Xu Caixing, Da Limei, Zhu Yuxu, He Fangjia, Wang Zeda. Laser cladding remanufacturing process of aircraft landing gear based on 30CrMnSiNi2A steel [J]. Heat Treatment of Metals, 2021, 46(6): 45-52.
[12]	Tong Jianbo, Li Xuefei, Huang Lijun, Zhang Wenqiang. Surface oxygen diffusion strengthening of near β titanium alloy by pre-coating [J]. Heat Treatment of Metals, 2021, 46(6): 74-78.
[13]	Su Xuehu. Boron-carburizing process of 1Cr13 stainless steel and its properties [J]. Heat Treatment of Metals, 2021, 46(6): 120-125.
[14]	Liu Ran, Gao Yuan, Wu Tao. Effect of Al/Si ratio on microstructure and wear resistance of Ti-Al-Si coating onTC4 alloy by laser cladding [J]. Heat Treatment of Metals, 2021, 46(3): 135-139.
[15]	Luo Ping, Li Xianjun, Zhang Wenliang, Deng Kun, Sun Lizhuang, Liu Junjie, Hou Junqing. Continuous cooling transformation curves of a bainitic wear-resistant cast steel for mining machinery [J]. Heat Treatment of Metals, 2021, 46(3): 170-174.

CoCrCuFeMnNi high-entropy alloy coating prepared by plasma cladding on Q235 steel

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments