| [1] |
Lian Yibo, Yang Chunlei, Wang Guodong, Song Wei.
Effect of solution treatment on microstructure of GH4080A superalloy
[J]. Heat Treatment of Metals, 2022, 47(4): 46-52.
|
| [2] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [3] |
Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng.
Effect of magnetic field pre-annealing on microstructure and texture of CGO steel
[J]. Heat Treatment of Metals, 2022, 47(4): 128-132.
|
| [4] |
Yang Jie, Ren Huiping, Liu Zongchang.
Kinetics of austenite grain growth of 15Cr12CuSiMoMn steel
[J]. Heat Treatment of Metals, 2022, 47(2): 53-58.
|
| [5] |
Chen Jianwen, Yuan Wufeng, Jiang Yizhou, Zhang Chen, Yi Huaqing, Gao Yiqiang.
Effect of forging heating temperature on austenite grain growth and mechanical properties of 20Cr2Ni4A steel
[J]. Heat Treatment of Metals, 2022, 47(2): 112-118.
|
| [6] |
Dai Yongjuan, Wu Xiangxiang, Li Jiakun, Guo Dong, Wang Bo.
Effect of annealing temperature on microstructure and properties of Fe-24.38Mn-0.44C TWIP steel
[J]. Heat Treatment of Metals, 2022, 47(2): 146-152.
|
| [7] |
Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren.
Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 130-134.
|
| [8] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [9] |
Du Pengju, Wu Di.
Effect of prior austenite grain size on martensitic transformation in medium manganese steel
[J]. Heat Treatment of Metals, 2021, 46(9): 21-27.
|
| [10] |
Dong Shaoming, Hu Jianwen, Liang Ziyu.
Heat treatment process of 75Cr1 steel for saw blade substrate and its microstructure and mechanical properties
[J]. Heat Treatment of Metals, 2021, 46(9): 193-198.
|
| [11] |
Tian Wei, Chang Song, Zhou Changshen, Zhang Wendi, Feng Zhihao, Sun Xinyang, Su Ru.
Microstructure transformation and metallographic analysis of Ni-based wrought superalloy during heat treatment
[J]. Heat Treatment of Metals, 2021, 46(8): 30-35.
|
| [12] |
Chen Jiping, Zhang Le, Xing Xianqiang, Sun Guoqing, Qian Jianqing.
Effect of oxidation time on evaluation of austenite grain size of low alloy spring steel
[J]. Heat Treatment of Metals, 2021, 46(8): 241-245.
|
| [13] |
Pan Longbo, Chu Tao, Zhang Shuo, Jiang Ji, Cheng Caijin, Xie Qingzhong, Xing Xueqiang, Si Tingzhi.
Dynamic recrystallization behaviors of 30CrNi3MoV steel and its mathematical models
[J]. Heat Treatment of Metals, 2021, 46(7): 23-30.
|
| [14] |
Wang Cheng, Guo Hongli, Sun Jian, Li Defa.
Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel
[J]. Heat Treatment of Metals, 2021, 46(6): 111-115.
|
| [15] |
Zhao Nan, Liu Xuewei, Sun Mingjun, Xue Jun.
Microstructure and fatigue properties of low temperature coiling hot-rolled dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(5): 55-59.
|
