| [1] |
Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng.
Effect of magnetic field pre-annealing on microstructure and texture of CGO steel
[J]. Heat Treatment of Metals, 2022, 47(4): 128-132.
|
| [2] |
Yu Shilun, Zhang Xiaojun, Kong Bin, Liu Zhengqiao, Yu Wei, Jiang Mengling.
Effect of annealing process on mechanical anisotropy of cold rolled commercial pure titanium coil
[J]. Heat Treatment of Metals, 2022, 47(3): 82-87.
|
| [3] |
Zhang Shijin, Li Kai, Yi Danqing, Liu Huiqun.
Recrystallization behavior and texture evolution of cold rolled TA5 titanium alloy during annealing
[J]. Heat Treatment of Metals, 2022, 47(2): 1-8.
|
| [4] |
Dong Lili, Ma Yonglin, Su Pengji, Yang Xuefeng.
Effect of pulsed magnetic field heat treatment on microstructure and texture of CGO oriented silicon steel during decarburization annealing
[J]. Heat Treatment of Metals, 2022, 47(2): 31-34.
|
| [5] |
Yang Jie, Ren Huiping, Liu Zongchang.
Kinetics of austenite grain growth of 15Cr12CuSiMoMn steel
[J]. Heat Treatment of Metals, 2022, 47(2): 53-58.
|
| [6] |
Xu Feng, Xiao Ying, Chen Qian, Deng Changchun, Sun Xiaohan.
Effect of cold rolling reduction rate on microstructure, texture and deep drawing properties of IF steel
[J]. Heat Treatment of Metals, 2022, 47(1): 250-254.
|
| [7] |
Wang Zimin, Yang Zhiqiang, Hu Fangzhong, Wang Kaizhong, Ding Lei.
Effect of Nb microalloying on austenite grain growth of 18CrNiMo7-6 steel
[J]. Heat Treatment of Metals, 2021, 46(9): 53-57.
|
| [8] |
Jiang Yingge, Huang Jiwu, Jiang Fuqing, Xu Chenglong.
Effect of cold rolling mode and annealing temperature on microstructure and texture evolution of Al-4Cu-0.73Mg alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 58-64.
|
| [9] |
Gong Hao, Kong Debin, Guo Lina, Han Hongwen, Gong Jingjing, Fang Hongjie.
Influence of intermediate annealing on microstructure and properties of cold rolled AlMgSiCu aluminum alloy sheet
[J]. Heat Treatment of Metals, 2021, 46(9): 129-132.
|
| [10] |
Meng Yuerui, Zhao Xianping, Zhou Bowen.
Cause analysis of r value decreasing of low carbon aluminum-killed steel sheet developed based on ferrite rolling process
[J]. Heat Treatment of Metals, 2021, 46(9): 211-215.
|
| [11] |
Qin Chun, Li Ning, Dong Fuyuan, Li Yongquan.
Grain growth behavior of Ti-22Al-27Nb alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 42-45.
|
| [12] |
Yan Yong, Bu Hengyong, Li Mengnie, Zheng Shanju.
Kinetics of austenite grain growth of S34MnV steel
[J]. Heat Treatment of Metals, 2021, 46(6): 153-159.
|
| [13] |
Peng Ze, Li Mengnie, Bu Hengyong, Li Qi.
Evolution of austenite grain size of 42CrMo steel during heating
[J]. Heat Treatment of Metals, 2021, 46(5): 25-31.
|
| [14] |
Wu Jing, Chen Jing, Jiang Yilan, Dai Xun, Zhang Ruiqian, Liu Huiqun.
Texture evolution of cold-rolled N18 alloy during recrystallization
[J]. Heat Treatment of Metals, 2021, 46(5): 38-46.
|
| [15] |
Xiao Na, Xu Xiaoning, Wang Yimin, Sun Yonghui, Tian Yong.
Effect of tempering temperature on microstructure, strength and toughness of EH460 grade medium and heavy ship plate steel
[J]. Heat Treatment of Metals, 2021, 46(5): 81-86.
|
